PART I
Forward-Looking Statements
This Annual Report on Form 10-K and the documents incorporated herein by reference contain forward-looking statements within the meaning of the Private
Securities Litigation Reform Act of 1995. All statements other than statements of historical fact made in this Annual Report on Form 10-K are forward-looking including, but not limited to, statements regarding industry prospects; future results of
operations or financial position; our expectations and beliefs regarding future revenue growth; the future capabilities and functionality of our products and services, our strategies and intentions regarding acquisitions; the outcome of any
litigation to which we are a party; our accounting and tax policies; our future strategies regarding investments, product offerings, research and development, market share, and strategic relationships and collaboration; our dividend policies; and
our future capital requirements. These statements relate to future events or our future financial performance. In some cases, you can identify forward-looking statements by terminology, including intend, could,
may, will, should, expect, plan, anticipate, believe, estimate predict, potential, future, or continue,
the negative of these terms or other comparable terminology. These statements are only predictions. Actual events or results may differ materially from those expressed or implied in such forward-looking statements. In evaluating these statements,
you should specifically consider various factors, including the risks identified in Item 1A below and from time to time in our other filings with the Securities and Exchange Commission. We do not intend to update any of the forward-looking
statements after the date of this document to conform them to actual results or to changes in our expectations.
Overview
We design, develop and manufacture advanced wafer probing and test socket solutions for the electrical measurement of high performance chips. We design,
manufacture and assemble our products in Beaverton, Oregon and Plymouth, Minnesota, with global sales, service and support centers in North America, Europe, Japan, Taiwan, China and Singapore. We were incorporated and introduced our first commercial
products in 1984.
Our products include engineering probe stations, analytical probes, production probe cards, test sockets, application
software and services. Engineering probe stations address the need for precise and accurate measurement of semiconductor electrical characteristics during chip design or when optimizing the chip fabrication process. Our engineering probe stations
are highly configurable and are typically sold with various accessories, including our analytical probes, as well as accessories from third parties. In addition, we design and build custom engineering probe stations to address the specific
requirements of our customers. Analytical probes are sold to serve as components of our engineering probe stations, or less often, to serve as components of test equipment manufactured by third parties. Our production probe cards and test sockets
are designed and sold for production test applications, ranging from very low current parametric testing to sophisticated, high speed radio frequency testing. We also design and sell our test sockets for prototype testing during engineering design.
Our analytical probes, production probe cards and test sockets are test consumables, as they are typically customized for each application and are routinely replaced during the testing process. We also generate revenue through the sale of service
contracts to our customers.
Our engineering probe stations, analytical probes and probing accessories are sold through our Engineering
Products Division (EPD). Our production probe cards and test sockets are sold through our Production Products Division (PPD). To date, we have derived the majority of our revenue from the sale of our engineering probe
stations, and we expect to continue to do so for the next few years. Our production products revenue, however, increased as a percentage of total revenues in 2007 as compared to 2006 and we expect that trend to continue in 2008.
2
Where You Can Find More Information
We file annual, quarterly and current reports, proxy statements and other information with the Securities and Exchange Commission (SEC) under the Securities Exchange Act of 1934 as amended (the
Exchange Act). You can inspect and copy our reports, proxy statements, and other information filed with the SEC at the SECs Public Reference Room at 100 F Street, NE, Washington, D.C. 20549. Please call the SEC at 1-800-SEC-0330
for further information on the Public Reference Room. The SEC maintains an Internet Web site at http://www.sec.gov where you can obtain some of our SEC filings. In addition, you can inspect our reports, proxy materials and other information at the
offices of the Nasdaq Stock Market at 1735 K Street NW, Washington D.C. 20006. We also make available free of charge on our website at
www.cascademicrotech.com
our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on
Form 8-K, and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act as soon as reasonably practicable after they are filed electronically with the SEC. You can also obtain copies of these
reports by contacting Investor Relations at 503-601-1000.
Industry Background
During the last decade, growth in the computer, telecommunications, consumer and industrial electronics markets has increased demand for chips. The Semiconductor Industry Association estimates
that worldwide semiconductor sales totaled $256 billion in 2007. To reduce the cost and increase the performance of electronic products, chips have become smaller and faster and incorporate greater levels of functionality at a lower price.
Advancements in manufacturing technologies, such as smaller chip elements, new materials and larger wafer sizes have permitted manufacturers to meet these requirements. However, these advancements in chip manufacturing technologies have led to
increasing challenges in the design, manufacturing and testing of chips. For example, the rapid increases in cellular phone handset functionality are in part enabled by increasing chip complexities. Our production probe cards are particularly driven
by the wireless industrys need to test high-frequency chips for cell phones, wireless computer networking and other wireless products such as Bluetooth headsets. IC Insights estimates that worldwide unit volumes of cell phones plus wireless
networking devices will increase from 2.5 billion in 2007 to 5.1 billion in 2011.
Chips are measured and tested multiple times throughout
the design and manufacturing process to ensure the integrity of the chip design and the quality of the manufacturing process. Chip testing that occurs during design or in support of production is referred to as engineering test. Chip testing that
occurs during manufacturing is referred to as production test. Engineering test involves performing a wide variety of highly precise measurements during chip research and development activities on a low volume of chips. Production test, in contrast,
involves performing a targeted set of tests at a rapid rate on a high volume of chips. Our strong presence in engineering test segments gives us high visibility of new chip processes and applications, thus aiding our planning and development of
production tools.
Our EPD business and operating results depend in significant part on the level of capital expenditures related to
semiconductor research and development, which, in turn, depends upon current and anticipated market demand for chips. Historically, the semiconductor industry has been highly cyclical with recurring periods of over-supply, which has often resulted
in a reduction in demand for our products. While our financial results are impacted by cycles within the semiconductor industry, we believe our business cycles are typically less pronounced than those of other semiconductor equipment companies. We
believe this is due to our greater reliance on our customers research and development capital spending and usage of test consumables rather than on our customers spending to increase production capacity. Capital spending aimed at
increasing production capacity is one of the first areas in which most semiconductor manufacturers reduce spending in an industry downturn.
Products
We design, manufacture and sell multiple product lines, including engineering probe stations, analytical probes, production probe
cards, test sockets, application software and various services. An engineering probe station is used in conjunction with our application software and analytical probes to test chips in wafer form, together forming an engineering probing system.
Analytical probes electrically
3
connect test equipment to the chips under test and are sold as consumable components of, and are mounted into, engineering probe stations.
Engineering probing systems are required in the development of new generations of chip processes and designs, and we expect that the demand for
engineering probing systems will continue to grow approximately at the rate of worldwide semiconductor revenues over the long term. The process development complexities and costs have continually increased as each generation of semiconductor process
has required the integration of more layers of smaller chip elements incorporating a longer list of new materials. Engineering probing systems are a basic tool for characterizing and verifying the electrical performance, reliability and
repeatability of the new chip elements.
We believe that we have significant market share by revenue in engineering probing tools
worldwide. We typically offer the widest product options and the highest electrical measurement performance for most engineering test requirements.
Engineering Probe Stations.
We offer engineering probe stations for 300mm, 200mm and 150mm or smaller wafer sizes. Engineering probe stations are highly configurable depending upon the size and type of
wafer, the particular characteristics of the chip that the customer is testing, the required measurements, the temperatures at which the chip is tested and the test equipment that the customer is using. Our engineering probe stations are available
in either manual or semiautomatic versions. We also offer many probe station accessories, including thermal control systems, special cables and connectors, microscopes, lasers, cameras and other items.
Our S300 probe station has been our main platform for 300mm wafers, and the largest revenue contributor of our system products. Nearly every
semiconductor company that develops processes for 300mm wafers has purchased at least one of our S300 stations, and we believe that our 300mm engineering prober market share by revenue is significant. In January 2008, we announced our
next-generation 300mm prober, the Elite 300 platform. The Elite 300 offers a superset of the S300 functionality and performance, in addition to a lower cost of ownership and a lower manufacturing cost. The Elite 300 also enhances our competitiveness
in various existing and emerging niches within engineering probing tools.
In 2007, we announced our Tesla probing system for
characterization measurements of power semiconductors. The Tesla system is a 200mm platform aimed at the development of semiconductors that can handle higher currents, voltages and power densities. The power semiconductor market is projected to grow
from $25.8 billion in 2007 to $34.2 billion in 2009, fueled by the increasing use of power devices in industrial products, automobiles and consumer electronics. Tesla widens our offerings to include this important segment of semiconductors, which is
growing faster than the average.
We also offer our Pureline option for our 200mm and 300mm probe stations. Pureline extends the
low-current and low-voltage measurement capabilities of these stations, thus extending our performance and technology lead compared to competitors stations.
We also offer our eVue microscope for our 300mm and 200mm probe station families, which is a high-performance digital microscope with advanced and unique navigation and probing-specific features. eVue enables us to
address and differentiate our offerings in new application segments within engineering wafer probing. One of our stated growth strategies is to work with strategic partners to deliver new solutions, and the eVue microscope is the result of one such
relationship. During the fourth quarter of 2006, we acquired certain assets related to the eVue microscope technology from our strategic partner in a transaction which was accounted for as a business acquisition.
Analytical Probes.
We offer over 50 different analytical probe models primarily for engineering test. The newer Infinity
series probes are designed with unique probe tips derived from our proprietary lithographic manufacturing technology, and offer exceptional electrical contact on aluminum and copper pads. While our analytical probes are used primarily for
engineering test, several of our
4
analytical probes are also used in production testing of some high-frequency devices. We continue to add new models of analytical probes that address higher
frequency and higher complexity measurements.
Application Software.
Our proprietary WinCal XE software is
embedded in stations sold to customers and was specifically designed to facilitate and improve the users productivity during set-up, calibration and data-logging to perform sophisticated high frequency measurements accurately and reliably.
Services.
In addition to routine installation services at the time of sale, we offer services to enable our
customers to maintain and more effectively utilize our equipment, probes and software and to enhance our customer relationships.
Production Probe Cards.
A production probe card temporarily connects one or more chips on a wafer under test to a production tester. Probe cards are customized for each new chip type and physically wear out during usage in production
testing. Depending upon the test environment, production probe cards may last for several hundred thousand to roughly 1 to 2 million contact cycles. Production card sales are driven by production unit volumes of the ICs being tested.
Our Pyramid Probe Card product line offers the highest electrical speed performance of any probe card commonly used in production. For
this reason, Pyramid cards are popular in high-frequency wireless chip applications.
Our probe card sales for chips used in wireless and
RF applications continue to increase due to the growth of those applications, the trend to more thoroughly test these chips at the wafer level before assembling them into more expensive modules, and the trend to test more chips in parallel with one
probe card, thus more efficiently employing the tester and autoprober equipment around the probe card.
Test
Sockets
. A test socket connects a packaged chip to a tester much like a probe card connects one or more chips on a wafer to a tester. Like probe cards, test sockets are production test consumables and have an discrete lifetime. Test sockets are
usually customized for each chip type tested. Our Gryphics socket product line also excels at high-speed chip applications, often the same chip types that we address with Pyramid cards.
One of our stated growth strategies is to grow the sales of production test consumables, including the Pyramid probe cards and Gryphics sockets from PPD. In 2007, our PPD revenues were up 25.6%
over 2006, comprising approximately 23.6% of total 2007 revenue compared to approximately 20% of total 2006 revenue. We expect the growth in our PPD segment to continue during 2008.
Acquisitions
Gryphics, Inc.
On April 3, 2007, we acquired Gryphics, Inc., a private company that designs, manufactures and markets a range of high performance socket products used for final production and evaluation
testing of packaged semiconductor integrated circuits. The results of operations from Gryphics, Inc. have been included in our PPD segment from the date of acquisition.
Synatron GmbH
In July 2007, we terminated our distribution agreement and acquired certain
assets and operations from our German distributor, Synatron GmbH. We have established a new subsidiary, Cascade Microtech, GmbH, which commenced operations as a direct sales and support office in Munich, Germany.
For additional information regarding these acquisitions, see Note 3 of Notes to Consolidated Financial Statements included in Item 8 of this Form
10-K.
5
Customers and Geographic Revenue
Our products are used by semiconductor manufacturers, test subcontractors, research organizations and designers. Fabless semiconductor suppliers do not manufacture their own semiconductors but they purchase our
analytical probes and engineering probe stations for research and development and purchase, or direct their foundries to purchase, our Pyramid Probe cards to test chips manufactured for them. We have built strong relationships with our customers
through frequent interactions over the past 20 years. To foster stronger customer relationships, we conduct analyses for the needs of our customers new labs or products, seminars on topics such as measurement techniques and proactive
service calls. This close interaction has helped us build a consistently loyal customer base. More than 800 customers purchased our products in 2007. Our top 20 end-user customers during 2007 were (in alphabetical order): Advanced Micro Devices,
Avago Technologies, Broadcom, Chartered Semiconductor, Freescale Semiconductors, Hynix Semiconductor, IBM, Infineon, Intel, NEC, NXP Semiconductors, Peregrine Semiconductor, Qualcomm, RF Micro Devices, Semiconductor Manufacturing Inc., Spansion, ST
Microelectronics, Taiwan Semiconductor Manufacturing Company, Texas Instruments and United Microelectronics.
We believe our customers
consider timely customer service and support to be an important aspect of our relationship. Our engineering probe stations are installed at customer sites either by us, our manufacturers representatives or our distributors, depending on the
complexity of the installation and the customers geographic location. We assist our customers in the selection, integration and use of our products by providing engineering application support. We also provide worldwide on-site training,
seminars and telephone support. Our manufacturers representatives and distributors provide additional service and support.
In 2007,
2006 and 2005, no single customer accounted for 10% or more of our total revenues. Our top 10 customers accounted for approximately 31%, 35% and 33% of our total revenue in each of 2007, 2006 and 2005, respectively.
International sales accounted for more than 50% of our total revenue in each of 2007, 2006 and 2005. The following table indicates which countries had
revenues that totaled 10% or more of our total revenues in 2007, 2006 and 2005 (in thousands):
|
|
|
|
|
|
|
|
|
|
|
|
Year Ended December 31,
|
|
|
2007
|
|
2006
|
|
2005
|
United States
|
|
$
|
35,198
|
|
$
|
32,220
|
|
$
|
23,877
|
Japan
|
|
|
11,349
|
|
|
14,239
|
|
|
15,085
|
Taiwan
|
|
|
8,093
|
|
|
6,856
|
|
|
7,612
|
Other
|
|
|
35,282
|
|
|
31,537
|
|
|
27,063
|
|
|
|
|
|
|
|
|
|
|
|
|
$
|
89,922
|
|
$
|
84,852
|
|
$
|
73,637
|
|
|
|
|
|
|
|
|
|
|
Segments
The segment data below is presented in the same manner that management organizes the segments for assessing certain performance trends. Beginning in the first quarter of 2007, our Chief Operating Decision Maker began
to monitor the revenue streams and the gross profit of EPD and PPD, as opposed to revenue information only, which was previously provided.
As such, the following table summarizes revenue and gross profit for each segment. The results of Gryphics, Inc. have been included in PPD from the acquisition date of April 3, 2007. The results of the acquisition of certain assets of
Synatron GmbH have been included in EPD from the acquisition date
6
of July 3, 2007. Prior period information has been reclassified to match the current period
presentation. We do not track our assets on a segment level, and, accordingly, that information is not provided (in thousands):
|
|
|
|
|
|
|
|
|
|
|
|
|
Year Ended December 31, 2007
|
|
EPD
|
|
|
PPD
|
|
|
Total
|
|
Revenue
|
|
$
|
68,724
|
|
|
$
|
21,198
|
|
|
$
|
89,922
|
|
Gross Profit
|
|
$
|
30,630
|
|
|
$
|
10,491
|
|
|
$
|
41,121
|
|
Gross Margin
|
|
|
44.6
|
%
|
|
|
49.5
|
%
|
|
|
45.7
|
%
|
|
|
|
|
Year Ended December 31, 2006
|
|
|
|
|
|
|
|
|
|
Revenue
|
|
$
|
67,969
|
|
|
$
|
16,883
|
|
|
$
|
84,852
|
|
Gross Profit
|
|
$
|
30,522
|
|
|
$
|
6,520
|
|
|
$
|
37,042
|
|
Gross Margin
|
|
|
44.9
|
%
|
|
|
38.6
|
%
|
|
|
43.7
|
%
|
|
|
|
|
Year Ended December 31, 2005
|
|
|
|
|
|
|
|
|
|
Revenue
|
|
$
|
63,566
|
|
|
$
|
10,071
|
|
|
$
|
73,637
|
|
Gross Profit
|
|
$
|
30,655
|
|
|
$
|
3,592
|
|
|
$
|
34,247
|
|
Gross Margin
|
|
|
48.2
|
%
|
|
|
35.7
|
%
|
|
|
46.5
|
%
|
Technology
We are a leading innovator in developing electrical measurement, or metrology, and production test tools. One of our stated growth strategies is to continue to develop next-generation technologies. We have focused our
research and development efforts on enabling our customers to take more precise electrical measurements in less time, on smaller and more dense devices, and with more robustness. Our core technologies include:
|
|
|
Broadband/High-Frequency/High Speed Interconnects and Probing.
In 1983, our founders created the first microwave analytical probes that enabled the
first on-wafer 18 GHz measurements and accelerated the commercialization of gallium arsenide chips. We use and maintain a wide variety of design, verification, fabrication and calibration technologies for high-frequency probes and interconnections.
For example, we have developed a complete library of high-frequency circuit elements for our Pyramid Probe layouts, similar to passive element libraries for chip foundries. We believe that these technologies provide a competitive advantage by
allowing us to more effectively design and commercialize production probe cards, test sockets and analytical probes.
|
|
|
|
Precise Low-Level Measurements.
In 1993, we were first to commercialize a shielded probe station utilizing our patented MicroChamber technology that
increased thermal measurement productivity by 10 times and current measurement resolutions by 1,000 times. Many of our engineering probe stations feature MicroChambers, which ensure a dark, electrically noise-free measurement environment to enable
low-current measurements over a wide thermal range. Our engineering probe stations also incorporate our proprietary low-noise thermal chuck technologies that increase measurement integrity and reduce the time required to take precise measurements.
These features, in turn, increase the number of chips that can be tested or measured in a given amount of time. In early 2008, we introduced our Elite 300 probe station, which implements our latest probe station technologies for improved low-current
and low-voltage measurements.
|
|
|
|
Microfabrication.
Since 1990, we have shipped products that utilize our proprietary lithographic manufacturing processes for depositing, lithographic
patterning, etching and plating probe structures on flexible substrates that are similar to the processes used in making chips. Our proprietary Pyramid technology has been under development since 1992 and continues to evolve and improve. In early
2008, we introduced two parametric probe cards that we build on our new Pyramid Plus manufacturing process. At the center of a Pyramid Probe card, tester connections converge on the chips under test through our unique, lithographically defined
microscopic probe tips and electrical interconnection wiring. We print the patented probe tips and interconnects on a flexible substrate in much the same manner as chips or circuit boards are printed, but with our unique materials and probe designs.
Our processing continues to mature and evolve, enabling faster delivery times, larger probe areas, smaller tip dimensions and interconnects, and wider test temperature ranges. As chip
|
7
|
elements continue to shrink, we expect to be able to scale and evolve our lithographic processes to continue to meet our customers requirements. Our
Gryphics socket products utilize unique stamping, laminating, drilling and robotic assembly processes to achieve high electrical performance and low costs.
|
Sales and Marketing
We sell our engineering probe stations, analytical probes, production probe
cards and test sockets through a combination of manufacturers representatives, distributors and direct sales people. Manufacturers representatives are independent third parties that agree to sell our products at our prices and on terms
set by us, in return for a commission based on sales. We typically use manufacturers representatives in areas that we believe require greater levels of customer support than we can deliver from our sales offices. Distributors purchase our
products and resell them at prices and upon terms set by the particular distributor. We typically use distributors where local regulations or business customs require local stocking of service parts, more immediate service support or other local
services. Finally, our direct sales force is made up of our salaried employees.
In North America and Asia, excluding Japan, Singapore,
Malaysia, China and Taiwan, we sell our products through manufacturers representatives and distributors. In Japan, we sell through Cascade Microtech Japan, K.K., our direct sales and service subsidiary. In Singapore and Malaysia, we sell
through our branch office, Cascade Microtech Singapore. During 2006, we established direct sales offices in China and Taiwan. In most of Europe, we primarily sell our EPD products through distributors and manufacturers representatives and sell
our PPD products directly. We also sell both our EPD and PPD products directly in Germany, Austria and Switzerland through our German subsidiary, Cascade Microtech GmbH, which we opened in July 2007. In other countries, we typically sell through
manufacturers representatives or distributors. Our sales managers oversee and manage these worldwide sales activities.
We work closely
with our customers to select the most appropriate product or to configure a custom solution to best fit their applications. Sales of our engineering test solutions require significant interaction with our customers engineering labs and
knowledge of their product development schedules and systems, as well as on-site demonstration capability. We also may assist our customers in the design requirements for their products to enhance testability. Sales of our production test solutions
require significant interaction with customer production test managers, knowledge of their specific product details and hands-on application support, particularly for new customers. Our production customers generally undertake an extensive
evaluation of new probe technology before adoption. Our sales managers are experienced sales professionals with in-depth technical training, customer knowledge and industry expertise. The technical sophistication of our products requires substantial
training for our manufacturers representatives, distributors and sales staff. We devote considerable effort and resources to developing a highly trained sales force that is responsive to our customers changing needs.
We focus our marketing efforts on building awareness of our products among designers and manufacturers of complex semiconductors. We market our products
and capabilities by participating in trade shows, providing product and technical information in print and on our website, hosting technical and product seminars, advertising in trade publications and using direct mailings. In addition, our
marketing staff performs market research and product planning. We also participate in joint sales and marketing activities with complementary equipment and software vendors to offer our customers complete test solutions. These relationships benefit
us because they can lead to broader awareness and increased sales of our products.
Research and Development
Our industry is subject to rapid technological change and new product introductions and improvements. Our continued investment in research and development
and timely introduction of new products and services is critical to maintaining and improving our competitive position. Our growth depends upon our ability to rapidly develop new products that enable customers to improve their electrical, optical
and mechanical measurements and increase their productivity. As a result, we
8
expect to continue to devote substantial resources to research and development. Our research and development expenses were $11.2 million in 2007, $8.9
million in 2006 and $7.0 million in 2005. We did not expend material amounts on customer-sponsored research and development in 2007, 2006 or 2005. In addition, we do not currently have any agreements with third parties for joint research and
development projects. We are currently devoting substantial resources to projects such as releasing new Pyramid Probe and test socket products, developing new Pyramid Probe and test socket manufacturing processes, developing faster, higher-accuracy
analytical probes and enhancing the functionality of our engineering probe stations. At December 31, 2007, we employed 61 research and development engineers. We conduct research and development for all of our product lines at our Beaverton,
Oregon and Plymouth, Minnesota facilities.
Manufacturing and Assembly
Our manufacturing and assembly operations consist of the production of highly complex and sophisticated components and assemblies, some of which are customized to meet customers needs and specifications. We
perform nearly all of our manufacturing and assembly in Beaverton, Oregon at our manufacturing facility within our headquarters building, at our Pyramid Probe microfabrication and assembly facility and at our machine shop. We also have a
manufacturing facility in Plymouth, Minnesota, where we make our test sockets. Our manufacturing strategy is to purchase components from vendors to the extent possible. However, we manufacture key components that we deem to be proprietary or that
provide us with a competitive advantage. We depend on limited source suppliers for some materials, components and subassemblies used in our products.
Our product design and manufacturing process activities emphasize accurate electrical measurements, precise and reliable mechanical components and assemblies and compliance with industry and governmental safety
requirements. We prototype and test our new standard product designs and components to ensure high electrical signal integrity, mechanical accuracy and safety. In our manufacturing operations, we perform electrical, mechanical and chemical tests and
use statistical process control methods, internally developed manufacturing information systems and inspections of purchased components and products to monitor our product quality throughout the various stages of our manufacturing process.
Competition
The markets for
engineering probe stations, analytical probes and production probe cards are highly competitive. We anticipate that the markets for our products will continually evolve and be subject to rapid technological change.
Engineering Probe Stations.
Our primary competitor in the engineering probe station market is Suss MicroTec AG (Karl Suss),
but we also compete with Vector Semiconductor Co. Ltd., Lucas/Signatone Corporation, The Micromanipulator Company Inc. and Wentworth Laboratories Inc., among others. We believe that the primary competitive factors in the engineering probe station
market are measurement accuracy and versatility, measurement speed, automation features, completeness of the measurement solutions, applications support, delivery time and price. We compete favorably with respect to these factors, except in small
niche markets where customers seek solutions that provide highly specialized testing environments.
Analytical
Probes.
Our primary competitor in the analytical probe market is GGB Industries Inc. We believe that the primary competitive factors in this market are breadth of probe types, probe frequency and electrical signal integrity, contact
integrity and the related cleaning required, calibration support, applications support, delivery time and price. We compete favorably with respect to these factors, except in small niche markets where customers seek solutions that provide highly
specialized testing environments.
Production Probe Cards.
Competition in the non-memory production probe card
market is fragmented and characterized by many suppliers offering products based on differing technologies. Our Pyramid Probe cards compete with product offerings of other probe card vendors including Feinmetall GmbH, FormFactor Inc., GGB Industries
Inc., Japan Electronic Materials Corporation,
9
Mesatronics S.A., Micronics Japan Company, Ltd., MicroProbe Inc., Micro Square Technology Inc., PHICOM Corporation, SV Probe Inc., Technoprobe S.r.l.,
Tokyo Cathode Laboratory Company Ltd., Wentworth Laboratories Inc. and others. At least five probe card vendors, FormFactor Inc., Japan Electronic Materials Corporation, Mesatronics S.A., Micronics Japan Company, Ltd. and PHICOM Corporation, are
also offering probe cards built using types of lithographic patterning. The high capital investment and other costs associated with the development of lithographically defined probe cards and the time and high cost of customer evaluation, represent
a significant barrier to entry for this type of technology. We believe that the primary competitive factors in the production probe market depend upon the type of chip being tested, but include customer service, delivery time, price, probe card
lifetime, chip damage, application support, probe tip touch-down accuracy, speed and frequency of the probe card, number of chips contacted in parallel, number of probe tips and their layout, signal integrity, and frequency and effectiveness of
cleaning required. We believe that we generally compete favorably in probe cards for high frequencies and high-speed signals, and in probe cards for parallel testing of chips with densely-packed bond pads. We generally do not compete in applications
that require very large probe areas, such as memory test, or that require delivery times of less than two weeks.
Test
Sockets.
Our competition in test sockets is fragmented among several companies. Depending upon the application, we compete with Antares Advanced Test Technologies, Everett Charles Technologies, Ironwood Electronics, Johnstech International,
Loranger International Corporation, Micronics Japan Company, Ltd., Plastronics and Synergetix. We believe that the primary competitive factors in the test socket market depend upon the type of chip being tested, but include customer service,
delivery time, price, socket lifetime, application support, contact resistance stability, speed and frequency range of the socket, number and density of socket contacts, signal integrity and frequency and effectiveness of cleaning required. We
believe that we generally compete favorably in test sockets for high frequencies and high-speed signals, and in test sockets for certain engineering applications. We generally do not compete in applications that require very low costs or high
volumes, such as memory burn-in sockets.
Intellectual Property
Our success in large part depends on our proprietary technology. We do not depend on any one individual patent, instead relying on intellectual property, including patents and trade secrets, covering electrical
measurement reliability and integrity, electrical shielding and the Pyramid Probe contact structure and production process. As of December 31, 2007, we had 95 issued patents and 89 pending patent applications in the U.S. and 145 issued foreign
patents and 52 pending foreign patent applications. In addition, we regard certain of our processes, information and know-how that we have developed and used to design and manufacture our products as proprietary trade secrets.
One important group of our patents claims technology relating to electrical shielding and other inventions required to measure extremely small signals on
wafers. Most of these U.S. patents will expire between 2012 and 2015. Another important group of our patents claims designs and construction methods for probe tips on Pyramid Probes. These patents will expire beginning in 2016.
Our policy is to seek patents where appropriate on inventions involving new products and improvements to existing products as part of our ongoing
engineering and research and development activities. We cannot assure you that any of our pending patent applications will be approved, that we will develop additional proprietary technology that is patentable, that any patents owned by or issued to
us will provide us with competitive advantages or that these patents will not be challenged by third parties. Furthermore, there can be no assurance that third parties will not design around our patents.
We also use certain patented technology of third parties in the manufacture of our products pursuant to license agreements. Pursuant to an agreement with
Micronics Japan Company Ltd. and Hewlett-Packard Japan Ltd. (now Agilent Technologies), our subsidiary, Cascade Microtech Japan, Inc. and its affiliates, have been granted a non-exclusive worldwide license to make, have made, use,
lease, sell or otherwise transfer certain products that make use of patented technology relating to electric circuit measurement equipment. In exchange for the rights granted under the license, we pay royalties
10
to Micronics Japan Company Ltd. and Agilent Technologies based on the number of products sold or leased. These royalties totaled $15,000 in 2007. Our
license will expire upon the expiration of the patent covering the licensed technology, which will occur in June 2013.
Seasonality
Typically, our revenue is lower in our fiscal first quarter than in our fiscal fourth quarter preceding it. In addition, as is typical in our industry, we
recognize a large percentage of our quarterly revenue in the last month of the quarter.
Employees
As of December 31, 2007, we had a total of 354 employees: 61 in engineering and research and development; 186 in manufacturing; and 107 in selling,
general and administrative functions. Of these employees, 296 were located in the U.S., 17 were in Japan, 14 were in Taiwan and 27 were in other countries. Many of our employees are highly skilled and our future performance depends largely on our
ability to continue to attract, train and retain qualified technical, sales, service, marketing and managerial personnel. None of our employees is subject to a collective bargaining agreement. We have not experienced any work stoppages and consider
our relations with our employees to be good.
Environmental Matters
As part of our manufacturing operations, we have handled and continue to handle materials that are considered hazardous or toxic under federal, state and local laws and regulations, and we are subject to environmental
laws and regulations related to the use, storage, discharge, disposal and human exposure to such materials. We believe we are in material compliance with the environmental laws and regulations applicable to the conduct of our business and
operations. However, there can be no assurance that violations of environmental laws or regulations will not occur in the future as a result of human error, equipment failure or other causes. The risk of a release of hazardous or toxic materials
cannot be completely eliminated, and if such a release occurs, we could be held financially responsible for the cleanup or other consequences of the release. We are not aware of any releases at any of our facilities that could reasonably be expected
to result in any material liabilities to us.
In addition, the European Parliament has finalized the Restriction on Use of Hazardous
Substances Directive, or RoHS Directive, which restricts the sale of new electrical and electronic equipment containing certain hazardous substances, including lead. Although we believe a majority of our products, if not all, are exempt from this
directive, we have modified our manufacturing processes, eliminating lead from products we put on the market as required by the RoHS Directive.
In addition, China has implemented a RoHS Directive that became effective in 2007. This Directive is similar to the European RoHS Directive, except for the fact that the China Directive does not include exemptions. Based on current
information available, we believe we comply with the China RoHS Directive. However, if it is determined that we do not comply with this Directive, we may suffer a loss of revenue, be unable to sell in certain markets or countries and suffer
competitive disadvantage.
The European Parliament has also recently finalized the Waste Electrical and Electronic Equipment Directive, or
WEEE Directive, which makes producers of electrical and electronic equipment financially responsible for specified collection, recycling, treatment and disposal of past and future covered products. As a producer of industrial electronic equipment,
we may incur financial responsibility for the collection, recycling, treatment or disposal of products covered under the WEEE Directive. Our products have been labeled in accordance with the WEEE Directive since before August 13, 2005, the WEEE
implementation date. We determined the products we presently produce are exempt because they either meet the definition of Large Scale Industrial Equipment, or are passive or non-electrical accessories that do not function on their own.
We have not incurred any costs or fees or penalties associated with non-compliance. Furthermore, none of our products have been delayed at a customs point-of-entry into an EU country or China in respect of these RoHS or WEEE Directives. Therefore,
we have some confidence that we are interpreting the rules correctly. However, because the EU member states have not fully implemented the WEEE Directive, the nature and extent of the costs to comply and fees or penalties associated with
non-compliance are still
11
unknown at this time. Costs to comply with the WEEE Directive and similar future legislation, if applicable, may also include legal and regulatory costs and
insurance costs. We may also be required to take reserves for costs associated with compliance with these regulations.
We are subject to
potentially conflicting and changing regulatory agendas of political, business and environmental groups and governmental priorities concerning environmental laws and regulations. We may be required to incur substantial costs to comply with current
or future environmental laws or regulations, and our operations, business or financial condition could be adversely affected by such requirements.
Backlog
Our backlog consists of purchase orders we have received for products and services with scheduled delivery dates
that we expect to ship and deliver or perform within the next 12 months. At December 31, 2007, our backlog was $17.4 million compared with $18.0 million at December 31, 2006. We generally ship our products within two months
of receipt of a customers purchase order. Accordingly, we expect to deliver nearly all of our December 31, 2007 backlog in 2008. Customers may cancel or delay delivery on previously placed orders, although our standard terms and
conditions include penalties for cancellations made close to the scheduled delivery date. As a result, the timing of the receipt of orders or the shipment of products could have a significant impact on our backlog at any date. In addition, a
significant portion of our revenue is generated from orders received and products shipped within a quarter. For this and other reasons, the amount of backlog at any date is not necessarily indicative of revenue in future periods.
Our operating results have fluctuated in the past
and are likely to fluctuate in the future, which could cause us to miss analyst expectations about these results and cause the trading price of our common stock to decline.
Our operating results have fluctuated in the past and are likely to continue to fluctuate. As a result, we believe that you should not rely on period-to-period comparisons of our financial
results as an indication of our future performance. Factors that are likely to cause our revenue and operating results to fluctuate include:
|
|
|
our geographic sales mix, product sales mix and average selling prices;
|
|
|
|
timing, cancellation or delay of customer orders;
|
|
|
|
seasonality, which has caused our first quarter revenue typically to decline compared to our fourth quarter revenue of the previous year;
|
|
|
|
customer demand, which is influenced, in part, by conditions in the electronics and semiconductor industry, demand for products that use semiconductors and
market acceptance of our products and those of our customers;
|
|
|
|
fluctuations in foreign currency exchange rates;
|
|
|
|
competition, such as competitive pressures on the price, performance and reliability of our products, the introduction or announcement of new products by us or
our competitors and our competitors intellectual property rights, which could prevent us from introducing products that compete effectively with their products;
|
|
|
|
our production capacity and availability and cost of materials, components and subassemblies;
|
|
|
|
our ability to deliver reliable products in a timely manner, including as a result of fluctuations in yield on some of our product lines;
|
|
|
|
our customers decisions regarding the level and timing of research and development spending;
|
|
|
|
our product development costs, including research and development and sales and marketing expenses associated with new products or product enhancements and the
costs of transitioning to new or enhanced products; and
|
|
|
|
economic conditions in the U.S. and the worldwide markets we serve.
|
12
For example, a majority of our revenue in the last five years was derived from the research and
development equipment spending of companies in the semiconductor industry or, to a much lesser extent, various research organizations, including universities, that conduct research that benefits the semiconductor industry. Our customers
spending on research and development is roughly proportional to the customers overall revenues. Historically, semiconductor industry revenues have been highly cyclical. According to industry data, the semiconductor industry has experienced
four significant cyclical downturns since 1983. For example, our revenue increased approximately 37% from 1999 to 2000. In contrast our revenue decreased approximately 29% from 2001 to 2002 and increased approximately 27%, 14%, 15% and 6% from 2003
to 2004, 2004 to 2005, 2005 to 2006 and 2006 to 2007, respectively. Given this history, there is no reason to expect that our customers business and, therefore, their demand for our products, will be less cyclical in the future.
If our revenue or operating results fall below the expectations of analysts or investors, the market price of our common stock could decline
substantially.
The cyclicality of the semiconductor industry affects our financial results, and, as a result, we may experience reduced sales or
operating losses in a semiconductor industry downturn.
The semiconductor industry is highly cyclical with recurring periods of wide
fluctuations in product supply and demand. From time to time, this industry has experienced significant downturns, often in connection with, or in anticipation of, periods of oversupply, maturing product and technology cycles, excess inventories and
declines in general economic conditions. Our customers purchase behavior in response to these cycles has been generally unpredictable. In the past, our operating results have been adversely affected by the cyclical downturns in the
semiconductor industry.
Our business is heavily dependent on the level of research and development spending of our customers, the volume
of semiconductor production by semiconductor manufacturers, the development of new semiconductors and semiconductor designs and the overall financial strength of our customers, which, in turn, depend upon the current and anticipated market demand
for semiconductors and the products incorporating them. Semiconductor manufacturers in particular are known to sharply curtail their capital expenditures when confronted with an industry downturn, such as the downturns experienced from 1996 through
1998 and from 2001 through the first six months of 2003. Semiconductor manufacturers may also suddenly curtail their capital expenditures in anticipation of a potential industry downturn, such as we experienced with 300mm probe station purchases in
September 2007. We expect that the markets for future generations of semiconductors will also be subject to similar fluctuations. Furthermore, some segments of the semiconductor industry may experience greater fluctuations than others. For example,
the price of mainstream dynamic random-access memory (DRAM) chips dropped from more than $6 in December 2006 to about $1 in December 2007, causing most memory chip manufacturers to freeze some or all capital spending by the end of 2007. Since we
sell our engineering systems to virtually all chip segments, our revenue may be affected by any significant segment weakness. We may not achieve or maintain our current or prior levels of revenue growth. Any factor adversely affecting the
semiconductor industry in general, or the particular segments, regions or major customers of the industry that our products target, will adversely affect our ability to generate revenue and could cause us to experience operating losses.
As is the case with other companies in our industry, many of our customers defer purchasing decisions until late each quarter. As a result, we are significantly
dependent upon the sale of our products in the third month of each quarter, and, if we do not generate enough revenue in the third month of each quarter to meet the earnings expectations of analysts or investors, the price of our common stock could
decline.
As is the case with other companies in our industry, we have historically recognized a substantial portion of our revenue in
the last month of each quarter because many of our customers defer purchasing decisions until late each quarter. Historically, we have often recognized more than 50% of our quarterly revenue in the third month of the quarter. We expect this trend to
continue for the foreseeable future. As a result, our ability to meet the earnings expectations of analysts depends on
13
our ability to not only generate customer orders in the third month of each quarter but also satisfy each of the various accounting requirements for
recognizing the revenue generated by such sales prior to the end of the quarter. Moreover, our engineering probe stations typically range in price from $30,000 to $350,000 for a single unit, so a delay in the shipment of even one engineering probe
station and the corresponding delay in recognition of revenue for the sale of probe stations, can have a very large impact on our quarterly results. If we are unable to generate a sufficient amount of sales during the last month of the quarter or if
we are unable to recognize the revenue generated by sales made during this period, we could miss the earnings expectations of analysts or investors, which could cause the price of our common stock to decline.
Because we generally do not have a sufficient backlog of unfilled orders to meet our quarterly revenue targets, revenue in any quarter is substantially dependent upon
customer orders received and fulfilled in that quarter.
Our revenue is difficult to forecast because we generally do not have a
sufficient backlog of unfilled orders for our engineering probe stations, analytical probes and production probe cards to meet our quarterly revenue targets at the beginning of a quarter. Historically, a significant portion of our revenue in any
quarter depends upon customer orders that we receive and fulfill in that quarter. Furthermore, because our expense levels are based in part on our expectations as to future revenue and, to a large extent, are fixed in the short term, we might be
unable to adjust spending in time to compensate for any unexpected shortfall in revenue. Accordingly, any significant shortfall in revenue in relation to our expectations and the expectations of analysts or investors could hurt our operating results
and result in a decline in the price of our common stock.
We continue to devote significant effort and resources to the growth and development of our
Pyramid Probe products, which has had, and could continue to have, an adverse effect on our operating margins.
Our future growth
depends, in part, on continued market adoption of, and growing demand for, our production probe cards. Large-scale market adoption of these products will depend on our ability to demonstrate the superior reliability and cost effectiveness of these
products to potential customers and on the continued growth of the market for high-speed or complex chips. Production customers are generally very risk-averse when adopting new technologies that could affect their production output, especially a
sole source supplier such as we are in the case of Pyramid Probes. We have devoted significant resources to the development and growth of these products in the past few years and expect to incur more investment in the form of people and equipment
during 2008. We anticipate spending approximately $5 million to $7 million for capital additions in 2008. If our production probe cards are not adopted in the market at a rate that is sufficient to offset the costs and resources that we devote to
the development and promotion of these products, the future growth of our overall business and our operating margins would be adversely affected.
If we
do not keep pace with technological developments in the semiconductor industry, especially the trend toward faster, smaller and lower cost chips, our revenue and operating results could suffer as potential customers decide to adopt our
competitors products.
We must continue to invest in research and development and certain manufacturing capabilities to improve
our competitive position and to meet the testing needs of our customers. Our future growth depends, in significant part, on our ability to work effectively with and anticipate the testing needs of our customers and on our ability to develop and
support new products and product enhancements to meet these needs on a timely and cost-effective basis. Our customers testing needs are becoming more challenging as the semiconductor industry continues to experience rapid technological change
driven by the demand for complex chips that have smaller element sizes and at the same time are increasing in speed and functionality and becoming less expensive to produce. Our customers expect that they will be able to integrate our wafer probing
products into their design and production processes as soon as they are deployed. Therefore, to meet these expectations and remain competitive, we must continually design, develop and introduce on a timely basis new products and
14
product enhancements with improved features. Successful product development and introduction on a timely basis require that we:
|
|
|
design innovative and performance-enhancing features that differentiate our products from those of our competitors;
|
|
|
|
identify emerging technological trends in our target markets, including new engineering and production test strategies;
|
|
|
|
respond effectively to technological changes or product announcements by others; and
|
|
|
|
adjust to changing market conditions quickly and cost-effectively.
|
If we are unable to timely predict industry changes, or if we are unable to modify our products on a timely basis, we might lose customers or market share, and our operating results could suffer.
We cannot assure you that we will successfully develop and bring new products to market in a timely and cost-effective manner, that any product enhancement or new product developed by us will gain market acceptance or that products or technologies
developed by others will not render our products or technologies obsolete or uncompetitive.
For example, the 2001 to 2003 downturn in the
semiconductor industry caused various chip manufacturers to readdress their respective strategies for converting existing 200mm wafer fabrication facilities to 300mm wafer fabrication or for building new 300mm wafer fabrication facilities. Some
manufacturers, including some of our customers such as Texas Instruments, Motorola and ST Microelectronics, delayed, cancelled or postponed previously announced plans to convert to 300mm wafer fabrication. At the time, those delays impacted demand
for our 300mm probe stations. Similarly, some large semiconductor suppliers may, in the future, shift to 450mm wafers. Past wafer-size transitions have been very costly, increasing the risk of delays. The timing of tool development by equipment
suppliers has been very costly if it is too early or too late. If we fail to invest in new tool developments at the right time and including the right functionality or performance, our revenue and margins may be adversely affected.
Intense competition in the semiconductor wafer probing business may reduce demand for our products and reduce our sales.
The markets for our products are highly competitive, and we expect competition to continue in the future. We believe that our principal competitors are
the major providers of probe stations, production probe cards and analytical probes. Our primary competitor in the probe station market is Suss MicroTec AG (Karl Suss), but we also compete with Vector Semiconductor Co. Ltd., Lucas/Signatone
Corporation, The Micromanipulator Company Inc., and Wentworth Laboratories Inc., among others. Our Pyramid Probe cards compete with product offerings of other probe card vendors including Feinmetall GmbH, FormFactor Inc., GGB Industries Inc., Japan
Electronic Materials Corporation, Mesatronics S.A., Micronics Japan Company, Ltd., MicroProbe, Inc., Micro Square Technology Inc., PHICOM Corporation, SV Probe, Technoprobe S.r.l., Tokyo Cathode Laboratory Company, Ltd., Wentworth Laboratories
Inc. and others. At least five probe card vendors, FormFactor Inc., Japan Electronic Materials Corporation, Mesatronics S.A., Micronics Japan Company, Ltd., and PHICOM Corporation, are also offering probe cards built using types of lithographic
patterning. Our primary competitor in the analytical probe market is GGB Industries. Our primary competitors in the test socket market are Antares Advanced Test Technologies, Everett Charles Technologies, Ironwood Electronics, Johnstech
International, Loranger International Corporation, Micronics Japan Company, Ltd., Plastronics and Synergetix,. These competitors or other potential competitors may have developed or may be developing technology of which we are unaware that may
render our products uncompetitive. Some of our competitors have significantly greater financial, technical and marketing resources than we do. As a result, these competitors may be able to respond more quickly to new or emerging technologies and
changes in customer requirements, to devote greater resources to the development, promotion and sale of their products or to deliver competitive products at lower prices. We cannot assure you that we will maintain our current competitive position or
that our production probe cards will achieve widespread acceptance in the market. Finally, increased competition could result in pricing pressures, reduced sales, reduced margins or failure to achieve or maintain
15
widespread market acceptance for our products, any of which could prevent us from growing our business.
We obtain some of the materials, components and subassemblies used in our products from a single source or a limited group of suppliers. If these suppliers are unable
to provide us with these materials, components or subassemblies in adequate quantities and on a timely basis, we may be unable to manufacture our products or meet our customers needs.
We obtain some of the materials, components and subassemblies used in our products from a single source or a limited group of suppliers. Certain of our
product purchases for 2007 were from sole source suppliers. Although we were not forced to delay shipment of any product due to delays in 2007 related to such suppliers, from time to time, we may experience difficulties in obtaining these materials,
components and subassemblies from some suppliers, especially during periods of high demand for semiconductor capital equipment. The manufacture of some of the materials, components and subassemblies that we use in our products, such as thermal
chucks and microscopes, is a complex process, and in the event that we cannot obtain an adequate supply of these components, it would be difficult and time-consuming to identify and qualify new suppliers. If some of the materials used in our
lithographic probe manufacturing process become unavailable, it would be costly and time consuming to identify and qualify new suppliers. Moreover, many of these suppliers are small companies that may be more susceptible to downturns in general
economic conditions, thereby increasing the risks of product and shipment delays, increased costs or loss of suppliers. Finally, we do not have written agreements with any of these suppliers to guarantee the supply of these products.
The delay in shipments from, or complete loss of, any one of these suppliers could prevent us from producing and shipping our products, resulting in
delayed or lost orders for our products and damage to our customer relationships, which would harm our results of operations. Furthermore, a significant increase in the price of one or more of these materials, components or subassemblies could
materially adversely affect our results of operations.
We depend upon the sale of our engineering probe stations for a significant portion of our
revenue, and a decline in demand for our engineering probe stations would have a more significant impact on our revenue than a downturn in demand for our analytical probes, production probe cards or test sockets.
Historically, we have derived a majority of our revenue from the sale of our engineering probe stations. We anticipate that sales of our engineering
probe stations will continue to represent the largest product line by revenue for the next few years. Our business depends in large part upon continued demand in current markets for, and adoption in new markets of, current and future generations of
our engineering probe stations. In addition, while our analytical probes are sometimes sold to serve as components of test equipment manufactured by third parties, they are most often sold for use with our engineering probe stations. Continued
market adoption depends upon our ability to increase customer awareness of the benefits of our engineering probe stations and to prove their reliability and cost effectiveness.
We may be unable to sell our engineering probe stations to existing and potential customers if those customers change their chip test strategies, change their capital equipment buying strategies
or chose not to change or upgrade their existing test equipment. We might not be able to sustain or increase our revenue from sales of our engineering probe stations, particularly if conditions in the semiconductor market deteriorate or if the
market enters into another downturn.
In addition, sales of our engineering probe stations depend in part upon the level of research and
development spending in the semiconductor industry. Historically, the level of research and development spending in the semiconductor industry has followed the overall cycles of the semiconductor industry but at a reduced rate of growth or decline,
as the case may be. If our customers reduce their research and development spending or if the overall level of research and development spending in the semiconductor industry does not continue to follow the growth rate of the
16
overall semiconductor industry, consistent with historical patterns, our revenue would decline, which could result in a decline in the price of our common
stock.
We believe that we currently have a significant market share in the engineering probe station market. As a result, it may be
difficult for us to both maintain our current level of market share and capture opportunities for growing our market share, especially if the market for engineering probe stations does not continue to grow as we expect. If the market for engineering
probe stations does not continue to grow, our business may not expand, even if we are successful in increasing our market share.
We may
make future acquisitions, which may be costly, difficult to integrate with our operations, divert management resources and dilute shareholder value.
As part of our business strategy, we may make acquisitions of, or investments in, companies, products or technologies that complement our current product offerings, enhance our technical capabilities, expand our
operations into new markets or offer other growth opportunities. During 2007, we acquired the operations of Gryphics, Inc. and certain assets of our German distributor, Synatron. If we fail to successfully integrate any acquired businesses, products
or technologies, we would not achieve anticipated revenue and cost benefits. We may acquire companies, products or technologies in the future, which could pose risks to our operations including:
|
|
|
difficulties assimilating the acquired operations, personnel, technologies or products into our company;
|
|
|
|
diversion of managements attention from our existing business; and
|
|
|
|
adverse effects on relationships with our existing suppliers, customers or partners.
|
As a result of our acquisitions, we have intangible assets, including goodwill and other identifiable intangible assets, recorded on our balance sheet. If our operating results do not justify
the value of the intangible assets, we may be required to record asset impairment charges in future periods, which would adversely impact our results of operations.
As of December 31, 2007 and 2006, we had goodwill and other identifiable intangible assets or $32.4 million and $3.9 million, respectively, recorded on our balance sheets. We test our goodwill and other
intangible assets for impairment annually or when an event occurs indicating the potential for impairment. If we record an impairment charge as a result of this analysis, it could have a material adverse impact on our results of operations.
We face economic, political and other risks associated with our international sales and operations, which could materially harm our
operating results.
Since 1997, we have derived more than 50% of our annual revenue from sales outside North America, primarily in
Japan, other Asian countries and Europe. Geographic revenue for those countries that represented 10% or more of total sales in a given year was as follows (in thousands):
|
|
|
|
|
|
|
|
|
|
|
|
Year Ended December 31,
|
|
|
2007
|
|
2006
|
|
2005
|
U.S.
|
|
$
|
35,198
|
|
$
|
32,220
|
|
$
|
23,877
|
Japan
|
|
|
11,349
|
|
|
14,239
|
|
|
15,085
|
Taiwan
|
|
|
8,093
|
|
|
6,856
|
|
|
7,612
|
Other
|
|
|
35,282
|
|
|
31,537
|
|
|
27,063
|
|
|
|
|
|
|
|
|
|
|
|
|
$
|
89,922
|
|
$
|
84,852
|
|
$
|
73,637
|
|
|
|
|
|
|
|
|
|
|
We expect international sales to continue to represent a substantial portion of our revenue for
the foreseeable future. In the past, the economic climate in some foreign markets, particularly in Asia, has quickly and dramatically changed, resulting in a negative effect on our operating results. For example, during the Asian economic crisis
that began in 1998, we saw a 34% decline in revenue in 1998
17
compared to 1997 from Asia not including Japan. We saw a 41% decrease in revenue from the same region in 2003 compared to 2001.
Currently, we maintain international offices in Europe and Asia, and we may establish new international offices in the future. If our gross margin from
international operations does not exceed the expense of establishing and maintaining our international operations, our operating margins would be adversely affected. Additional risks we face in conducting business internationally include:
|
|
|
difficulties and costs of staffing and managing international operations across different geographic areas;
|
|
|
|
the possible lack of financial and political stability in foreign countries, preventing overseas sales growth;
|
|
|
|
changes in domestic or foreign law or policy resulting in the need to comply with potentially burdensome government controls, regulations, tariffs, embargoes or
export license requirements;
|
|
|
|
differing and more burdensome labor regulations and practices in Europe;
|
|
|
|
the aftermath of the war in Iraq or other armed conflicts in the Middle East;
|
|
|
|
the effects of sudden outbreaks of epidemics in Asia and other parts of the world; and
|
|
|
|
the effects of terrorist attacks in the U.S. and any related conflicts or similar events worldwide.
|
The different cultures in countries where we do business often challenge us to meet or manage local expectations about how employees are hired, managed,
compensated, or terminated. For example, most employees in Japan expect an organization wherein a managers direct reports are younger than the manager. In Europe, governments force the severance costs of a reduction in force action to be
generally much higher than in the U.S.
Finally, there have been significant fluctuations in the exchange rates between the dollar and the
currencies of countries in which we do business. While most of our international sales have been denominated in U.S. dollars, our international operating expenses have been denominated in foreign currencies. As a result, a decrease in the value of
the U.S. dollar relative to the foreign currencies could increase the relative costs of our overseas operations, which could reduce our operating margins. Significant unfavorable fluctuations in the exchange rates between the U.S. dollar and foreign
currencies could cause us to lower our prices and thus reduce our profitability. In addition, fluctuations in exchange rates could cause customers to delay or cancel orders because of the increased cost of our products relative to those of our
competitors who manufacture in other countries. Other income (expense), net in 2007, 2006 and 2005 included the following currency related gains and losses (in thousands):
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Year Ended December 31,
|
|
|
|
2007
|
|
|
2006
|
|
2005
|
|
Remeasurement related foreign currency gains (losses)
|
|
$
|
(254
|
)
|
|
$
|
97
|
|
$
|
(34
|
)
|
Gains related to foreign currency hedges
|
|
|
238
|
|
|
|
253
|
|
|
151
|
|
We rely on independent manufacturers representatives and distributors for a significant
portion of our revenue, and a disruption in our relationship with our manufacturers representatives or distributors would have a material adverse effect on our revenue.
Approximately 55% of our revenue for 2007 was generated through independent manufacturers representatives and distributors, whose activities are not within our direct control. In addition,
in some locations, our manufacturers representatives and distributors provide field service to our customers. A reduction in the sales efforts or financial viability of these manufacturers representatives or distributors, or a
termination of our relationship with these representatives or distributors, would have a material adverse effect on our sales, financial results and ability to support our customers. Our manufacturers representatives and distributors are not
obligated to continue selling our products, and they may terminate their arrangements with us at any time with limited or no prior notice. If we make the business decision to terminate or modify our relationships with one or more of our independent
manufacturers representatives, or if a manufacturers representative decides to disengage from us,
18
and we do not effectively and efficiently manage such a change, we could lose sales to existing customers and fail to obtain new customers. Establishing
alternative sales channels would consume substantial time and resources, decrease our revenue and increase our expenses.
Failure to
retain key managerial, technical, and sales and marketing personnel or to attract new key personnel could harm our business.
Our
success depends on the continued services of our executive officers and other key management, technical, and sales and marketing personnel and on our ability to continue to attract, retain and motivate qualified personnel. Currently, our key
personnel include Geoff Wild, our President and Chief Executive Officer, Willis Damkroger, our Vice President and General Manager, Production Products Division, Steven Sipowicz, our Chief Financial Officer, John Pence, our Vice President and General
Manager, Engineering Products Division, Eric Strid, our Chairman and Chief Technical Officer and K. Reed Gleason, our Vice President of Advanced Development. Our executive officers and other key employees are able to exercise stock options and
sell the underlying stock, which may reduce their incentive to continue their employment with us. The loss of key personnel could limit our ability to develop new products and adapt existing products to our customers evolving requirements and
may result in lost sales and a diversion of management resources. Furthermore, much of our competitive advantage and intellectual property is based on the expertise, experience and know-how of our key personnel. We do not have employment agreements
or non-competition agreements with any of our employees except for employment agreements with our President and Chief Executive Officer and our Chief Financial Officer. To support our future growth, we will need to attract and retain additional
qualified management, technical and sales and marketing employees. Competition for such personnel in our industry is intense, and we cannot assure you that we will be successful in attracting and retaining such personnel.
Our customers evaluation processes can lead to lengthy sales cycles, during which we may incur significant costs that may not result in sales.
Our customers typically expend significant efforts in evaluating and qualifying our products prior to placing an order, particularly
for orders of engineering probe stations and production probe cards. This evaluation and qualification process frequently results in a lengthy sales cycle, typically ranging from three to 12 months and sometimes longer. During the period in
which our customers are evaluating our products, we incur substantial sales, marketing, research and development expenses and expend significant management efforts. After completing this evaluation process, a potential customer may elect not to
purchase our products. In addition, product purchases are frequently subject to unplanned processing and other delays, particularly with respect to larger customers for which our products represent a very small percentage of their overall purchase
activity.
Additional factors, some of which are partially or completely outside our control, that affect the length of time it takes us to
complete a sale, include:
|
|
|
the efforts of our sales force;
|
|
|
|
the history of previous sales to the customer;
|
|
|
|
the complexity of the customers engineering or production processes;
|
|
|
|
the internal technical capabilities and sophistication of the customer; and
|
|
|
|
the capital expenditure budgets of the customer.
|
The lengthy and unpredictable nature of our sales cycle could result in fluctuations in our operating results, which could fall below the expectations of analysts and investors for any particular period of time, and
result in a decline in the price of our common stock.
If our products contain defects, our reputation would be damaged, and we could
lose customers and revenue and incur warranty expenses.
The complexity and ongoing development of our products, as well as the
inclusion in our products of components purchased from third parties, could lead to design, manufacturing or performance
19
problems. Our products may contain defects which could cause our sales to decline, our reputation to be significantly damaged and our customers to be
reluctant to buy our products, any or all of which could result in a decline in revenue, an increase in product returns, higher field service costs, the loss of existing customers or the failure to attract new customers. Our warranty expense totaled
$637,000, $573,000 and $624,000, for 2007, 2006 and 2005, respectively. Although we are not currently seeking reimbursement from any vendors related to our warranty expense, we have in the past, and may again in the future, seek reimbursement from
certain vendors. To the extent that we experience additional failures of purchased components that increase our warranty expenses that are not reimbursed by the vendor, our results of operations will be adversely affected.
If we fail to protect our proprietary technology and rights, competitors may be able to use our technologies, which would weaken our competitive
position and could reduce our sales.
Our success and competitive position depend in significant part on the technically innovative
features of our products, and, if we fail to protect our proprietary rights, our competitors might gain access to our technology. Although we rely in part on patent, trade secret and trademark laws to protect the proprietary technology used in our
products, our patents may be challenged by third parties and held invalid, and any of our pending patent applications may not be approved. Additionally, we may not be able to develop additional proprietary technology that is patentable. Policing
unauthorized use of our products is difficult, and we may not be able to prevent the misappropriation and unauthorized use of our technologies. Furthermore, our existing and future patents may not be sufficiently broad to protect our proprietary
technologies, may not provide us with competitive advantages and may be circumvented by the designs of third parties.
Unauthorized parties
may attempt to copy aspects of our products or to obtain and use information that we regard as proprietary. Others may independently develop or otherwise acquire similar or competing technologies or methods or design around our patents.
Additionally, some of our proprietary technology cannot be effectively protected by patents. In these cases, we rely on trade secret laws and confidentiality agreements to protect our confidential and proprietary information, processes and
technology. However, our confidential and proprietary information, processes and technology could be independently developed by, or otherwise become known to, third parties, which would weaken our competitive position and might reduce our sales.
Since 1997, we have derived more than 50% of our annual revenue from products sold to customers outside of North America. The laws of some
foreign countries do not protect our proprietary rights to the same extent as the laws of the U.S., and many companies have encountered substantial problems in protecting their proprietary rights against infringement in such countries. The manner in
which we protect our proprietary rights may not be adequate in some foreign countries. Our failure to adequately protect our intellectual property in foreign countries would make it easier for competitors to copy or circumvent our product designs
and sell competing products in those countries, which could adversely affect our revenue and cause us to lose customers.
Intellectual
property infringement claims by or against us may result in litigation, the cost of which could be substantial and could prevent us from selling our products.
The semiconductor industry is characterized by uncertain and conflicting intellectual property claims, frequent litigation regarding patent and other intellectual property rights and vigorous protection and pursuit of
these rights. Questions of infringement in the semiconductor industry involve highly technical and subjective analyses. Litigation may be necessary to determine the validity and scope of our proprietary rights or to defend against claims of
infringement or invalidity by third parties, and we may not prevail in any litigation. Any such litigation, whether or not determined in our favor or settled, might be costly, could harm our reputation, could cause product shipment delays and could
divert the efforts and attention of our management and technical personnel from our normal business operations.
20
An adverse outcome in any intellectual property litigation might result in the loss of our proprietary
rights, subject us to significant liabilities, require us to spend significant resources to develop non-infringing technology, require us to seek licenses from third parties, prevent us from manufacturing and selling our products or require us to
discontinue the use of certain technology in our products, any of which could have an adverse effect on our business, financial condition and results of operations. License agreements, if required, might not be available on terms acceptable to us or
at all.
Our growth could strain our personnel and infrastructure resources, and, if we are unable to implement appropriate controls and
procedures to manage our growth, we may not be able to successfully implement our business plan.
Our growth has placed, and will
continue to place, significant demands on our management, operational, financial and technical resources and on our internal control, management information and reporting systems. Our success will depend, in part, upon the ability of our senior
management to manage this growth effectively. To manage the expected growth of our operations and personnel, we will need to:
|
|
|
continue to improve our operational, financial and management controls and our reporting systems and procedures;
|
|
|
|
manage the growth of different product lines with different cost structures; and
|
|
|
|
recruit, train, manage and motivate our employees to support our expanded operations.
|
Our success depends on our continued investment in research and development, the level and effectiveness of which could reduce our profitability.
We will continue to make investments in research and development to sustain and improve our competitive position and meet our customers needs.
These investments currently include refining Pyramid Probe fabrication processes, developing higher performance Pyramid Probe cards, test sockets and analytical probes and enhancing engineering probe stations for both 300mm and sub-300mm wafers. To
maintain our competitive position, we may need to increase our research and development investment, which could reduce our profitability. In addition, we cannot assure you that we will achieve a return on these investments, nor can we assure you
that these investments will improve our competitive position and meet our customers needs.
We manufacture nearly all of our
products at our Oregon and Minnesota facilities, and any disruption in the operations of these facilities could harm our business.
We
manufacture almost all of our products in our facilities located in Beaverton, Oregon and Plymouth, Minnesota. Our manufacturing processes are complex and require sophisticated and costly equipment and specially designed facilities. As a result, any
prolonged disruption in the operations of our facilities, whether due to technical or labor difficulties or destruction of or damage to the facilities as a result of an earthquake, fire or any other reason, could materially and adversely affect our
business, financial condition and results of operations.
We may fail to comply with environmental regulations, which could result in significant costs
and harm our business.
We are subject to a variety of federal, state and local laws, rules and regulations relating to the storage,
use, discharge, disposal and human exposure to hazardous and toxic materials used in our thin-film fabrication facility and other manufacturing operations. The risk of a release of hazardous or toxic materials cannot be completely eliminated, and if
such a release occurs, we could be held financially responsible for the cleanup or other consequences of the release. We are not aware of any releases at any of our facilities that could reasonably be expected to result in any material liabilities
to us. Our past, present or future failure to comply with environmental laws and regulations could result in enforcement actions, substantial liabilities and suspension of production or cessation of operations in extreme situations. Compliance with
current or future environmental laws and regulations could restrict our ability to expand our facilities or build new facilities or require us to acquire additional
21
expensive equipment, modify our manufacturing processes, or incur other substantial expenses which could harm our business, financial condition and results
of operation.
For example, the European Parliament has finalized the RoHS Directive which restricts the sale of new electrical and
electronic equipment containing certain hazardous substances, including lead. Although we believe a majority of our products, if not all, are exempt from this directive, we have modified our manufacturing processes, eliminating lead from products we
put on the market as required by the RoHS Directive.
In addition, China has implemented a RoHS Directive that became effective in 2007.
This Directive is similar to the European RoHS Directive, except for the fact that the China Directive does not include exemptions. Based on current information available, we believe we will be able to comply with the China RoHS Directive. However,
if it is determined that we do not comply with this Directive, we may suffer a loss of revenue, be unable to sell in certain markets or countries and suffer competitive disadvantage.
The European Parliament has also finalized the WEEE Directive, which makes producers of electrical and electronic equipment financially responsible for specified collection, recycling, treatment
and disposal of past and future covered products. As a producer of industrial electronic equipment, we may incur financial responsibility for the collection, recycling, treatment or disposal of products covered under the WEEE Directive. Our products
have been labeled in accordance with the WEEE Directive since before August 13, 2005, the WEEE implementation date. We determined the products we presently produce are exempt because they either meet the definition of Large Scale
Industrial Equipment, or are passive or non-electrical accessories that do not function on their own. We have not incurred any costs or fees or penalties associated with non-compliance. Furthermore, none of our products have been delayed at a
customs point-of-entry into an EU country or China in respect of the RoHS or WEEE Directives. Therefore, we have some confidence that we are interpreting the rules correctly. However, because the EU member states have not fully implemented the WEEE
Directive, the nature and extent of the costs to comply and fees or penalties associated with non-compliance are still unknown at this time. Costs to comply with the WEEE Directive and similar future legislation, if applicable, may also include
legal and regulatory costs and insurance costs. We may also be required to take reserves for costs associated with compliance with these regulations.
These environmental laws and regulations could become more stringent over time, imposing even greater compliance costs and increasing risks and penalties associated with violations, which could seriously harm our
business, financial condition and results of operation. There can be no assurance that violations of environmental laws or regulations will not occur in the future as a result of the inability to obtain permits, human error, equipment failure or
other causes.
Product liability claims may be asserted against us, resulting in costly litigation for which we may not have sufficient
liability insurance.
Our customers may use our products in the testing of high reliability semiconductors for critical applications
such as telecommunications infrastructure, military, medical and aerospace equipment. Defects or other problems with the performance of our products could result in financial or other damages to our customers. In addition, some of our engineering
probe stations that use high powered lasers or operate at high voltage or extreme temperatures may cause death or injury to persons utilizing such equipment due to undetected design or manufacturing defects or due to improper use or maintenance by
our customers. Although our product invoices and sales contracts generally contain provisions designed to limit our exposure to product liability claims, existing or future laws or unfavorable judicial decisions could negate these provisions.
Product liability litigation against us, even if it were unsuccessful, could be time consuming and costly to defend. Additionally, although we carry product liability insurance, in some circumstances it may not cover certain claims or be adequate to
cover all claims.
22
We rely on a small number of customers for a significant portion of our revenue, and the termination
of any of these relationships would adversely affect our business.
Our top four customers accounted for a total of 17% and 21% of our
revenue in 2007 and 2006, respectively. Our customer base is less diversified in PPD than in EPD. Our customers are not obligated by long-term contracts to purchase our products and may discontinue purchasing our products at any time. The
semiconductor industry is highly concentrated and a small number of semiconductor manufacturers generally account for a substantial portion of the purchases of semiconductor test equipment, including our products. Consequently, our business and
operating results would be materially, adversely affected by the loss of any of our significant customers.
In addition, our ability to
increase our revenue will depend in part upon our ability to obtain orders from new customers, particularly customers of our production probe cards. Obtaining orders from new customers is difficult because semiconductor manufacturers typically
select one vendors products for testing a particular new generation of chips. Once a manufacturer has selected a vendor, that manufacturer is more likely to continue to purchase products from that vendor for that generation of chips, as well
as subsequent generations of chips. We therefore place great emphasis on relationships with our current customers because these customers are difficult to replace. In addition, we focus on leveraging our relationships with current customers to sell
into additional engineering labs and production lines in the same company and similar groups in other companies. If we are unable to maintain our relationships with our existing significant customers or to obtain new customers that adopt and
implement our products and technology, we will not be able to meet our revenue and growth targets, which could result in a decline in the price of our common stock.
Our employment costs in the short-term are, to a large extent, fixed, and therefore, any shortfall in sales would harm our operating results.
Our operating expense levels are based, in significant part, on our headcount. For a variety of reasons, particularly the high cost and disruption of layoffs, the costs of recruiting and training
new personnel and product delivery and service commitments to our customers, our headcount in the short-term is, to a large extent, fixed. Accordingly, we may be unable to reduce employment costs in a timely manner to compensate for any shortfall in
our sales or gross margins, which could materially harm our operating results.
Unanticipated changes in our tax rates or exposure to additional income
tax liabilities could affect our profitability.
We are subject to income taxes in both the U.S. and various foreign jurisdictions, and
our domestic and international tax liabilities are subject to the allocation of expenses in different jurisdictions. Our effective tax rate could be adversely affected by changes in the mix of earnings in countries with different statutory tax
rates, changes in the valuation of deferred tax assets and liabilities, changes in tax laws, including pending tax law changes, such as the benefit from export sales and the research and development credit by material audit assessments. In
particular, the carrying value of deferred tax assets, which are predominantly in the U.S., is dependent on our ability to generate future taxable income in the U.S. In addition, the amount of income taxes we pay could be subject to ongoing audits
in various jurisdictions and a material assessment by a governing tax authority could affect our profitability. We are currently under audit with the Internal Revenue Service (IRS) and have received notification that the audit will
disallow certain research and engineering credits on our returns for which we have not provided a contingency reserve. We may enter into a legal dispute with the IRS over this matter and the costs could be significant.
23
Our officers and directors and their affiliates will control the outcome of matters requiring shareholder approval.
As of March 10, 2008, our executive officers and directors and their affiliates beneficially own approximately 28% of our
outstanding shares of common stock. Consequently, these shareholders will have substantial influence over the election of our directors and the outcome of corporate actions requiring shareholder approval, such as a merger or a sale of our company or
a sale of all or substantially all of our assets. This concentration of voting power and control could have a significant effect in delaying, deferring or preventing an action that might otherwise be beneficial to our other shareholders and be
disadvantageous to our shareholders with interests different from those of our officers, directors and affiliates. These shareholders will also have significant control over our business, policies and affairs. Additionally, this significant
concentration of share ownership may adversely affect the trading price for our common stock because investors often perceive disadvantages in owning stock in companies with controlling shareholders.
The anti-takeover provisions of our charter documents and Oregon law may inhibit a takeover or change in our control that shareholders may consider
beneficial.
Provisions of our articles of incorporation and bylaws and provisions of Oregon law may have the effect of delaying or
preventing a merger or acquisition of us, making a merger or acquisition of us less desirable to a potential acquirer or preventing a change in our management, even if the shareholders consider the merger or acquisition favorable or if doing so
would benefit our shareholders. In addition, these provisions could limit the price that investors would be willing to pay in the future for shares of our common stock. The following are examples of such provisions in our articles of incorporation
or bylaws:
|
|
|
We have a staggered board of directors, which will make it more difficult for a group of shareholders to quickly change the composition of our board.
|
|
|
|
Our board of directors is authorized, without prior shareholder approval, to create and issue preferred stock with voting or other rights or preferences that
could impede the success of any attempt to acquire us or change our control, commonly referred to as blank check preferred stock.
|
|
|
|
Members of our board of directors can only be removed for cause.
|
|
|
|
The board of directors may alter our bylaws without obtaining shareholder approval.
|
|
|
|
Shareholders are required to provide advance notice for nominations for election to the board of directors or for proposing matters to be acted upon at a
shareholder meeting.
|
|
|
|
Any action that is taken by written consent of shareholders must be unanimous.
|
We are also subject to the provisions of the Oregon Control Share Act and the Oregon Business Combination Act, each of which may have certain anti-takeover effects.
If our stock price is volatile, securities class action litigation may be brought against us, which could result in substantial costs.
In the past, securities class action litigation has often been brought against a company following periods of volatility in the market price of its
securities, and newly public companies tend to experience more volatility in their stock price. We may be the target of such litigation in the future. Securities litigation may result in substantial costs and divert managements attention and
resources, which may seriously harm our business.
ITEM 1B.
|
UNRESOLVED STAFF
COMMENTS
|
None.
24
We maintain our corporate headquarters in Beaverton, Oregon. Our primary site contains corporate
administration, sales and marketing, design, test, light manufacturing and assembly and various support functions in leased space totaling 102,438 square feet in three adjacent buildings. This lease expires December 31, 2015 as to two of these
buildings. The lease for the third building, totaling 23,000 square feet, is available for sub-lease and expires in June 2008. Our Pyramid Probe manufacturing is conducted in a 10,000 square foot clean room within a 58,817 square foot facility
that we lease at a separate site in Beaverton, Oregon. Our lease of this facility expires December 31, 2014. Our test socket manufacturing is conducted in a 8,600 square foot facility that we lease in Plymouth, Minnesota. We lease small sales
and service offices in Japan, England, Germany, China, Taiwan and Singapore.
ITEM 3.
|
LEGAL PROCEEDINGS
|
As of the date of filing this
Form 10-K, we are not a party to any material legal proceedings. However, the semiconductor test industry is characterized by vigorous protection and pursuit of intellectual property rights and positions. To protect our intellectual property from
infringement, we have, from time to time, initiated litigation against third parties and may be required to do so in the future. We cannot assure you that we shall be successful in future intellectual property litigation and this litigation often is
protracted and expensive.
ITEM 4.
|
SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS
|
No matters
were submitted to a vote of security holders during the fourth quarter of 2007.
PART II
ITEM 5.
|
MARKET FOR THE REGISTRANTS COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES
|
Stock Prices and Dividends
Our common stock
began trading on the Nasdaq National Market System under the symbol CSCD on December 15, 2004. The high and low closing sale price of our common stock by quarter for each of the eight quarters in the two-year period ended
December 31, 2007 was as follows:
|
|
|
|
|
|
|
2007
|
|
High
|
|
Low
|
Quarter 1
|
|
$
|
14.54
|
|
$
|
13.10
|
Quarter 2
|
|
|
14.40
|
|
|
11.92
|
Quarter 3
|
|
|
11.90
|
|
|
9.85
|
Quarter 4
|
|
|
10.19
|
|
|
8.40
|
|
|
|
2006
|
|
High
|
|
Low
|
Quarter 1
|
|
$
|
14.81
|
|
$
|
11.17
|
Quarter 2
|
|
|
13.30
|
|
|
10.89
|
Quarter 3
|
|
|
12.52
|
|
|
10.80
|
Quarter 4
|
|
|
13.65
|
|
|
12.25
|
As of March 4, 2008, there were 69 shareholders of record and approximately 1,500 beneficial shareholders.
We have not declared or paid any cash dividends on our common stock in the past two years. We currently expect to retain any future
earnings to fund the operation and expansion of our business, and therefore, we do not currently expect to pay cash dividends in the foreseeable future.
Use of Proceeds
We filed a registration statement on Form S-1, File No. 333-113256 for an initial public
offering of common stock, which was declared effective by the Securities and Exchange Commission on
25
December 15, 2004. In that offering, we sold an aggregate of 3.3 million shares of our common stock with net offering proceeds of $41.6 million. No
payments were made to our directors or officers or their associates, holders of 10% or more of any class of our equity securities or to any affiliates.
As of December 31, 2007, we had used approximately $5.5 million of those proceeds for the repayment of indebtedness and $14.9 million, net of cash acquired, for our acquisitions of Gryphics, Inc. and certain
assets of Synatron GmbH. In addition, an additional $1.0 million was paid in the first quarter of 2008 related to our purchase of certain assets and liabilities related to the eVue product line in the fourth quarter of 2006.
Equity Compensation Plan Information
See Item 12. for
Equity Compensation Plan Information.
Stock Performance Graph
The SEC requires that registrants include in this report a line-graph presentation comparing cumulative five-year shareholder returns on an indexed basis, assuming a $100 initial investment and reinvestment of
dividends. Our graph consists of (a) Cascade Microtech, Inc.; (b) the Nasdaq Stock Market Total Return Index U.S. and (c) a peer group index composed of Teradyne, Inc., FormFactor, Inc., Kulicke & Soffa Industries,
Inc., Credence Systems Corporation, Electro Scientific Industries, Inc. and Keithley Instruments, Inc. The peer group index utilizes the same methods of presentation and assumptions for the total return calculation as does Cascade Microtech, Inc.
and the Nasdaq Stock Market Total Return Index U.S. All companies in the peer group index are weighted in accordance with their market capitalizations. Our initial public offering was December 14, 2004 and, accordingly, our graph only
includes the time period of December 14, 2004 to December 31, 2007.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Base
Period
|
|
Indexed Returns Period Ended
|
Company/Index
|
|
12/14/04
|
|
12/31/04
|
|
12/31/05
|
|
12/31/06
|
|
12/31/07
|
Cascade Microtech, Inc.
|
|
$
|
100.00
|
|
$
|
95.93
|
|
$
|
90.21
|
|
$
|
93.57
|
|
$
|
72.79
|
Semiconductor Peer Group
|
|
|
100.00
|
|
|
101.36
|
|
|
89.37
|
|
|
93.25
|
|
|
71.40
|
Nasdaq U.S.
|
|
|
100.00
|
|
|
100.73
|
|
|
102.87
|
|
|
113.02
|
|
|
122.56
|
26
ITEM 6.
|
SELECTED CONSOLIDATED FINANCIAL DATA
|
The
consolidated statement of operations and balance sheet data set forth below have been derived from our consolidated financial statements. The selected consolidated financial data set forth below should be read in conjunction with
Managements Discussion and Analysis of Financial Condition and Results of Operations and with the consolidated financial statements and notes thereto included elsewhere in this Form 10-K.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For the Year Ended December 31,
|
|
IN THOUSANDS
(except per share amounts)
|
|
2007
|
|
2006
|
|
2005
|
|
2004
|
|
|
2003
|
|
Statement of Operations Data
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Revenue
|
|
$
|
89,922
|
|
$
|
84,852
|
|
$
|
73,637
|
|
$
|
64,415
|
|
|
$
|
50,556
|
|
Cost of sales
|
|
|
48,369
|
|
|
47,367
|
|
|
39,351
|
|
|
35,625
|
|
|
|
30,433
|
|
Stock-based compensation
|
|
|
432
|
|
|
443
|
|
|
39
|
|
|
67
|
|
|
|
19
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gross profit
|
|
|
41,121
|
|
|
37,042
|
|
|
34,247
|
|
|
28,723
|
|
|
|
20,104
|
|
Operating expenses:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Research and development
|
|
|
11,241
|
|
|
8,949
|
|
|
6,968
|
|
|
5,681
|
|
|
|
5,422
|
|
Selling, general and administrative
|
|
|
27,723
|
|
|
24,819
|
|
|
19,778
|
|
|
16,831
|
|
|
|
15,436
|
|
Amortization of purchased intangibles
|
|
|
1,977
|
|
|
130
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Total operating expenses
|
|
|
40,941
|
|
|
33,898
|
|
|
26,746
|
|
|
22,512
|
|
|
|
20,858
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Income (loss) from operations
|
|
|
180
|
|
|
3,144
|
|
|
7,501
|
|
|
6,211
|
|
|
|
(754
|
)
|
Other income (expense), net
|
|
|
1,336
|
|
|
1,961
|
|
|
1,991
|
|
|
(117
|
)
|
|
|
553
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Income (loss) before income taxes
|
|
|
1,516
|
|
|
5,105
|
|
|
9,492
|
|
|
6,094
|
|
|
|
(201
|
)
|
Provision for income taxes
|
|
|
586
|
|
|
1,495
|
|
|
1,173
|
|
|
1,387
|
|
|
|
248
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Net income (loss)
|
|
|
930
|
|
|
3,610
|
|
|
8,319
|
|
|
4,707
|
|
|
|
(449
|
)
|
Accretion of redeemable stock and loss on redemption
|
|
|
|
|
|
|
|
|
|
|
|
113
|
|
|
|
583
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Net income (loss) attributed to common shareholders
|
|
$
|
930
|
|
$
|
3,610
|
|
$
|
8,319
|
|
$
|
4,594
|
|
|
$
|
(1,032
|
)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Basic net income (loss) per share attributed to common shareholders
|
|
$
|
0.07
|
|
$
|
0.31
|
|
$
|
0.75
|
|
$
|
0.84
|
|
|
$
|
(0.20
|
)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Diluted net income (loss) per share attributed to common shareholders
|
|
$
|
0.07
|
|
$
|
0.30
|
|
$
|
0.70
|
|
$
|
0.56
|
|
|
$
|
(0.20
|
)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Shares used in basic per share calculations
|
|
|
12,550
|
|
|
11,482
|
|
|
11,055
|
|
|
5,439
|
|
|
|
5,089
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Shares used in diluted per share calculations
|
|
|
12,840
|
|
|
11,959
|
|
|
11,816
|
|
|
8,452
|
|
|
|
5,089
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
December 31,
|
|
|
|
2007
|
|
2006
|
|
2005
|
|
2004
|
|
|
2003
|
|
Balance Sheet Data
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cash, cash equivalents and short-term marketable securities
|
|
$
|
29,421
|
|
$
|
43,794
|
|
$
|
50,346
|
|
$
|
43,747
|
|
|
$
|
10,717
|
|
Working capital
|
|
|
58,965
|
|
|
68,642
|
|
|
74,601
|
|
|
63,333
|
|
|
|
24,228
|
|
Total assets
|
|
|
125,281
|
|
|
103,786
|
|
|
90,120
|
|
|
79,016
|
|
|
|
37,766
|
|
Current portion of long-term debt and capital lease obligations
|
|
|
13
|
|
|
|
|
|
8
|
|
|
21
|
|
|
|
2,043
|
|
Long-term debt and capital lease obligations, less current portion
|
|
|
51
|
|
|
|
|
|
|
|
|
14
|
|
|
|
5,038
|
|
Other long-term liabilities
|
|
|
5,763
|
|
|
1,370
|
|
|
1,100
|
|
|
1,449
|
|
|
|
1,398
|
|
Redeemable stock
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
584
|
|
Shareholders equity
|
|
|
107,605
|
|
|
90,193
|
|
|
81,505
|
|
|
70,188
|
|
|
|
22,960
|
|
27
ITEM 7.
|
MANAGEMENTS DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
|
You should read the following discussion in conjunction with our consolidated financial statements and notes thereto appearing elsewhere in this Form 10-K. In addition to historical consolidated financial
information, the following discussion and analysis contains forward-looking statements that involve risks, uncertainties and assumptions. Our actual results could differ materially from those anticipated by these forward-looking statements as a
result of many factors, including those discussed under Item 1A, Part I, Risk Factors, and elsewhere in this Form 10-K. We do not guarantee future results, levels of activity, performance or achievements. We do not intend to update
any of the forward-looking statements after the date of this document to conform them to actual results or to changes in our expectations.
Overview
We design, develop and manufacture advanced wafer probing and test socket solutions for the electrical measurement of high performance
chips. We design, manufacture and assemble our products in Beaverton, Oregon and Plymouth, Minnesota, with global sales, service and support centers in North America, Europe, Japan, Taiwan, China and Singapore. We were incorporated and introduced
our first commercial products in 1984.
Our products include engineering probe stations, analytical probes, production probe cards, test
sockets, application software and services. Engineering probe stations address the need for precise and accurate measurement of semiconductor electrical characteristics during chip design or when optimizing the chip fabrication process. Our
engineering probe stations are highly configurable and are typically sold with various accessories, including our analytical probes, as well as accessories from third parties. In addition, we design and build custom engineering probe stations to
address the specific requirements of our customers. Analytical probes are sold to serve as components of our engineering probe stations, or less often, to serve as components of test equipment manufactured by third parties. Our production probe
cards are designed and sold for production test applications, ranging from very low current parametric testing to sophisticated, high speed radio frequency testing. Our test sockets are designed and sold for both production and engineering test
applications, typically for high speed digital and radio frequency testing. We refer to analytical probes, production probe cards and test sockets as consumables, as they are routinely replaced during the testing process. We also generate revenue
through the sale of service contracts to our customers.
Our engineering probe stations, analytical probes and probing accessories are sold
through our Engineering Products Division (EPD). Our production probe cards and test sockets are sold through our Production Products Division (PPD). To date, we have derived the majority of our revenue from the sale of our
engineering probe stations, and we expect our probe stations to be our largest product line by revenue for the next few years. Our PPD revenue, however, increased as a percentage of total revenues in 2007, due to the acquisition of Gryphics, Inc. in
April 2007, compared to 2006.
Our engineering products business and operating results depend in significant part on the level of capital
expenditures related to semiconductor research and development, which, in turn, depends upon current and anticipated market demand for chips. Historically, the semiconductor industry has been highly cyclical with recurring periods of over-supply,
which has often resulted in a reduction in demand for our products. While our financial results are impacted by cycles within the semiconductor industry, we believe our business cycles are typically less pronounced than those of other semiconductor
equipment companies. We believe this is due to our greater reliance on our customers research and development capital spending and usage of test consumables rather than on our customers spending to increase production capacity. Capital
spending aimed at increasing production capacity is one of the first areas in which most semiconductor manufacturers reduce spending in an industry downturn.
While the conversion to 300mm technology continues, high conversion costs combined with continued process developments on 200mm wafers continue to make sales of our sub-300mm probing systems
28
an important component of our revenue stream for the foreseeable future. 300mm technology more than doubles the available area on a wafer, significantly
increasing the number of chips per wafer and reducing per unit manufacturing costs. Revenue from our 300mm engineering probe stations, including all probes, accessories and other items sold therewith, represented 40.3% and 36.7% of our total EPD
revenue in 2007 and 2006, respectively.
In June 2007, we announced our Tesla system for characterization measurements of power
semiconductors. The Tesla system is a 200-mm platform aimed at the development of semiconductors that can handle higher currents, voltages and power densities. Tesla widens our offerings to include this important segment of semiconductors, which is
growing faster than the average. We booked and shipped our first Tesla systems in the fourth quarter of 2007.
In January 2008, we
announced our Elite 300 platform. This next-generation engineering prober is a major upgrade of our S300 system, and will support the next five years of semiconductor research and development. We believe the new wafer stage technology in the Elite
300 enables mechanical accuracy, reliability and maintainability that is superior to anything else available in the market today. We expect the enhanced performance of the Elite 300 to widen the segments we address within engineering probing by
strengthening our offerings for design debug, failure analysis, wafer level reliability and emerging segments.
We sell our solutions to
most segments of the semiconductor industry, including manufacturers of communications, wireless, microprocessors and other logic and memory chips. A substantial portion of our revenue is generated from sales of our engineering probe stations and
analytical probes to research and development laboratories of semiconductor manufacturers as well as to fabless semiconductor companies and academic institutions. As a result, we sell to a geographically diversified customer base, with more than 50%
of our revenue in 2007 and 2006 generated from customers outside of North America, primarily in Japan, other Asian countries and, to a lesser extent, Europe.
We sell our products both directly through our own sales force and indirectly through a combination of manufacturers representatives and distributors. In North America and Asia, excluding Japan, Taiwan,
Singapore, Malaysia and portions of China, we sell most of our products through manufacturers representatives. We sell certain products in these regions directly. In Japan, Taiwan, Singapore, Malaysia and China, we sell through Cascade
Microtech Japan, K.K., Cascade Microtech Taiwan, Cascade Microtech Singapore and Cascade Microtech China, our direct sales and service subsidiary and branch offices, respectively. In most of Europe, we primarily sell our EPD products through
distributors and manufacturers representatives and we sell our PPD products directly. We also sell both our EPD and PPD products directly in Germany, Austria, Switzerland, China and Taiwan. Our distributors normally place orders with us once
they have received an order from an end-user customer, and therefore, the total amount of inventory held by our distributors at any given date is not material.
29
Results of Operations
The following table sets forth our consolidated statement of operations data for the periods
indicated as a percentage of revenue.
(1)
|
|
|
|
|
|
|
|
|
|
|
|
For the Year Ended December 31,
|
|
|
|
2007
|
|
|
2006
|
|
|
2005
|
|
Statement of Operations Data
|
|
|
|
|
|
|
|
|
|
Revenue
|
|
100.0
|
%
|
|
100.0
|
%
|
|
100.0
|
%
|
Cost of sales and stock-based compensation
|
|
54.3
|
|
|
56.3
|
|
|
53.5
|
|
|
|
|
|
|
|
|
|
|
|
Gross profit
|
|
45.7
|
|
|
43.7
|
|
|
46.5
|
|
Operating expenses:
|
|
|
|
|
|
|
|
|
|
Research and development
|
|
12.5
|
|
|
10.5
|
|
|
9.5
|
|
Selling, general and administrative
|
|
30.8
|
|
|
29.2
|
|
|
26.9
|
|
Amortization of purchased intangibles
|
|
2.2
|
|
|
0.2
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Total operating expenses
|
|
45.5
|
|
|
39.9
|
|
|
36.3
|
|
|
|
|
|
|
|
|
|
|
|
Income from operations
|
|
0.2
|
|
|
3.7
|
|
|
10.2
|
|
Other income (expense), net
|
|
1.5
|
|
|
2.3
|
|
|
2.7
|
|
|
|
|
|
|
|
|
|
|
|
Income before income taxes
|
|
1.7
|
|
|
6.0
|
|
|
12.9
|
|
Provision for income taxes
|
|
0.7
|
|
|
1.8
|
|
|
1.6
|
|
|
|
|
|
|
|
|
|
|
|
Net income
|
|
1.0
|
%
|
|
4.3
|
%
|
|
11.3
|
%
|
|
|
|
|
|
|
|
|
|
|
(1)
|
Percentages may not add due to rounding.
|
The following table summarizes revenue and gross profit for each of our segments. Prior period information has been reclassified to match the current period presentation (dollars in thousands):
|
|
|
|
|
|
|
|
|
|
|
|
|
Year Ended December 31, 2007
|
|
EPD
|
|
|
PPD
|
|
|
Total
|
|
Revenue
|
|
$
|
68,724
|
|
|
$
|
21,198
|
|
|
$
|
89,922
|
|
Gross Profit
|
|
$
|
30,630
|
|
|
$
|
10,491
|
|
|
$
|
41,121
|
|
Gross Margin
|
|
|
44.6
|
%
|
|
|
49.5
|
%
|
|
|
45.7
|
%
|
|
|
|
|
Year Ended December 31, 2006
|
|
|
|
|
|
|
|
|
|
Revenue
|
|
$
|
67,969
|
|
|
$
|
16,883
|
|
|
$
|
84,852
|
|
Gross Profit
|
|
$
|
30,522
|
|
|
$
|
6,520
|
|
|
$
|
37,042
|
|
Gross Margin
|
|
|
44.9
|
%
|
|
|
38.6
|
%
|
|
|
43.7
|
%
|
|
|
|
|
Year Ended December 31, 2005
|
|
|
|
|
|
|
|
|
|
Revenue
|
|
$
|
63,566
|
|
|
$
|
10,071
|
|
|
$
|
73,637
|
|
Gross Profit
|
|
$
|
30,655
|
|
|
$
|
3,592
|
|
|
$
|
34,247
|
|
Gross Margin
|
|
|
48.2
|
%
|
|
|
35.7
|
%
|
|
|
46.5
|
%
|
The segment data provided is prepared in accordance with SFAS No. 131, Disclosures
About Segments of an Enterprise and Related Information, and is not meant to represent stand alone divisional information. See Note 15 of Notes to Consolidated Financial Statements included in Item 8 of this Report on Form 10-K for
additional information.
Revenue
Revenue increased $5.0 million, or 6.0%, to $89.9 million in 2007 compared to $84.9 million in 2006 and increased $11.3 million, or 15.2%, in 2006 compared to $73.6 million in 2005.
Revenue in EPD increased $0.7 million, or 1.1%, to $68.7 million in 2007 compared to $68.0 million in 2006 and increased
$4.4 million, or 6.9%, in 2006 compared to $63.6 million in 2005.
Certain financial information which contributed to the EPD
revenue results was as follows:
|
|
|
|
|
|
|
|
|
2007 compared to
2006
|
|
|
2006 compared to
2005
|
|
Percentage increase (decrease) in unit sales
|
|
(5.8
|
)%
|
|
4.0
|
%
|
Percentage increase in average sales price
|
|
9.9
|
%
|
|
1.4
|
%
|
30
Average sales price includes the sales price of all analytical probes, probe cards and other accessories
purchased with an engineering probe station.
The decrease in unit sales in 2007 compared to 2006 was due to an increase in sales of our
300mm systems being offset by a decrease in unit sales of our non-300mm systems. The increase in the 300mm systems was due to increased customer demand. As more customers transition to our 300mm systems, sales of non-300mm systems typically decline
as a percentage of total system sales.
The increases in average sales price in 2007 compared to 2006 and in 2006 compared to 2005 were
primarily attributable to increased unit sales of our 300mm systems, which have a higher average sales price than our non-300mm systems, and declining unit sales of our non-300mm systems. In addition, in 2007 compared to 2006, the average sales
price for our non-300mm systems increased, contributing to the overall increase.
For 2006 compared to 2005, although the average sales
price increased overall, both the 300mm and the non-300mm average sales prices decreased. These decreases were primarily due to sales of low-end options selected on 300mm systems and more competitive pricing provided on multiple system orders in
2006 compared to 2005. These decreases were partially offset by the purchase of our higher-end eVue microscopes with many of the 300mm systems.
Other EPD revenue decreased 8.5% in 2007 compared to 2006 and increased 14.3% in 2006 compared to 2005. These changes were primarily due to fluctuations in stand-alone analytical probe revenue. Stand-alone analytical probe revenue
fluctuates from period to period due to the mix of systems sold, the number of platforms requiring replacements and exchange rate fluctuations.
Revenue in PPD increased $4.3 million, or 25.6%, to $21.2 million in 2007 compared to $16.9 million in 2006 and increased $6.8 million, or 67.6%, in 2006 compared to $10.1 million in 2005.
The increase in PPD revenue in 2007 compared to 2006 was primarily due to the addition of Gryphics, Inc. during the second quarter of 2007, which
accounted for $3.8 million of the increase. During 2007, we focused on RF and wireless applications for our probe cards, which contributed to a more diversified probe card customer base. In 2007, the top six customers represented approximately 50%
of probe card revenues compared to the top three probe card customers representing approximately 50% of our probe card revenue in 2006.
The increases in PPD revenue in 2006 compared to 2005 was due to an increase in the number of production probe cards sold, partially offset by a shift in mix to lower priced probe cards.
During the last several quarters, we have been adding probe card capabilities in the form of headcount and equipment. Although we expect to add
additional equipment during the next few quarters, we do not anticipate significant headcount additions. We have recently expanded our clean room space and increased our manufacturing capacity.
Cost of Sales and Gross Profit
Cost of sales
includes purchased materials, fabrication, assembly, test and installation labor and overhead, customer-specific engineering costs, warranty costs, royalties and provision for inventory valuation reserves.
Fluctuations in gross profit as a percentage of revenue, or gross margin, primarily result from changes in geographic mix, product mix, general pricing
dynamics and yields in some of our production lines. Sales in Europe typically have a lower gross margin than sales in North America and Japan due to our use of third-party distributors in Europe. Within EPD, we typically achieve higher gross
margins on the consumables than on the engineering probe stations.
31
Cost of sales, including stock-based compensation, increased $1.0 million, or 2.1%, to $48.8 million
in 2007 compared to $47.8 million in 2006 and increased $8.4 million, or 21.4%, in 2006 compared to $39.4 million in 2005.
The increases were primarily due to the following:
|
|
|
|
|
|
|
2007 Compared
to 2006
|
|
Increased direct costs, such as raw materials, resulting from changes in revenue and product mix
|
|
$
|
257,000
|
|
Increased inventory costs related to scrapping, obsolescence, revisions and returns
|
|
|
951,000
|
|
Increase in salaries and related costs in EPD labor due to higher production activities and wage increases
|
|
|
297,000
|
|
Increase in supplies due to higher production volumes
|
|
|
558,000
|
|
Increase in salaries and related costs in PPD resulting from changes in headcount and other labor
|
|
|
104,000
|
|
Decrease due to costs allocated to finished goods inventory
|
|
|
(560,000
|
)
|
Decrease due to increased allocation of costs to research and development expense due to increased research and development fab
runs
|
|
|
(542,000
|
)
|
Other decreases
|
|
|
(65,000
|
)
|
|
|
|
|
|
|
|
$
|
1,000,000
|
|
|
|
|
|
|
|
|
|
|
|
|
2006 Compared
to 2005
|
Increased direct costs, such as raw materials, resulting from higher revenue and changes in geographic and product mix
|
|
$
|
4,765,000
|
Increased inventory costs related to scrapping, discrepancies, obsolescence, revisions and returns
|
|
|
463,000
|
Increased freight expenses due primarily to more overseas inventory purchases and higher fuel costs
|
|
|
562,000
|
Increased salaries and related costs in PPD resulting from increased headcount and other labor
|
|
|
1,146,000
|
Increased stock-based compensation
|
|
|
404,000
|
Other increases related to increased sales
|
|
|
1,060,000
|
|
|
|
|
|
|
$
|
8,400,000
|
|
|
|
|
Gross profit increased $4.1 million, or 11.0%, to $41.1 million in 2007 compared to $37.0 million
in 2006 due primarily to the increased sales discussed above. Our gross margin increased to 45.7% in 2007 compared to 43.7% in 2006. The gross margin improvement was within PPD and resulted primarily from the inclusion of gross margin from Gryphics,
Inc. product sales beginning during the second quarter of 2007, as well as increased fab run allocations to research and development expense. The increase in the number of research and development fab runs resulted in an increase in research and
development expenses and a decrease in cost of sales. Improved internal efficiencies, including shorter product lead times, better on-time deliveries, shorter cycle times, higher yields, better scheduling and tracking, fewer design errors and better
forecasts also contributed to the improved PPD gross margins. The decrease in gross margin in EPD in 2007 compared to 2006 was primarily due to the mix of product sales and some price discounts.
Gross margin decreased to 43.7% in 2006 compared to 46.5% in 2005. This decrease was primarily attributable to additional costs incurred to ramp our
production run rate and reduce lead times within PPD. In addition, stock-based compensation increased $0.4 million in 2006 compared to 2005, which resulted in an approximately 0.5 percentage point decrease in gross margin in 2006 compared to 2005.
We expect gross margins to be flat or slightly improve in 2008 compared to 2007, due to various product line improvements, partially
offset by product mix effects.
32
Research and Development
Research and development costs are expensed as incurred and include compensation and related expenses for personnel, materials, consultants and overhead. From time to time, we enter into arrangements that provide for
the reimbursement of research and development expenses. Such reimbursements are netted against gross research and development expenses.
Research and development expenses increased $2.3 million, or 25.6%, to $11.2 million in 2007 compared to $8.9 million in 2006 and increased $1.9 million, or 28.4%, in 2006 compared to $7.0 million in 2005. We do not expect
research and development expenses to increase significantly in 2008 compared to 2007.
The increases were primarily due to the following:
|
|
|
|
|
|
2007 Compared
to 2006
|
Increase in salaries and benefits primarily due to increases in headcount
|
|
$
|
1,191,000
|
Increase in stock-based compensation due to increased headcount and annual awards
|
|
|
56,000
|
Increase related to the increasing number of research and development fab runs
|
|
|
542,000
|
Increase in severance
|
|
|
42,000
|
Increase in prototype parts and design changes
|
|
|
259,000
|
Increases in other costs, including supplies
|
|
|
210,000
|
|
|
|
|
|
|
$
|
2,300,000
|
|
|
|
|
|
|
|
|
|
|
2006 Compared
to 2005
|
Increase in salaries and benefits primarily due to increases in headcount
|
|
$
|
1,221,000
|
Increase in stock-based compensation due to the adoption of SFAS No. 123R in the first quarter of 2006
|
|
|
288,000
|
Increases in other costs, including supplies
|
|
|
391,000
|
|
|
|
|
|
|
$
|
1,900,000
|
|
|
|
|
Selling, General and Administrative
Selling, general and administrative, or SG&A, expense includes compensation and related expenses for personnel, travel, outside services, manufacturers representative commissions,
patent and trademark amortization and overhead incurred in our sales, marketing, customer support, management, legal and other professional and administrative support functions, as well as costs to operate as a public company.
SG&A expense increased $2.9 million, or 11.7%, to $27.7 million in 2007 compared to $24.8 million in 2006 and increased $5.0 million, or
25.5%, in 2006 compared to $19.8 million in 2005. The increases were primarily due to the following:
|
|
|
|
|
|
|
2007 Compared
to 2006
|
|
Increase in costs related to our China and Taiwan sales offices, which opened in the second quarter of 2006
|
|
$
|
382,000
|
|
Increase in salaries and related expenses due to increased headcount
|
|
|
1,091,000
|
|
Increase in IT services, labor and other services due to international expansion demands
|
|
|
149,000
|
|
Increase in accounting fees
|
|
|
88,000
|
|
Increased stock-based compensation due to increased headcount and annual awards
|
|
|
419,000
|
|
Increase related to recruiting costs for Chief Operating Officer and German sales manager
|
|
|
114,000
|
|
Increase in severance due to reductions in workforce
|
|
|
245,000
|
|
Decrease related to decreased legal costs as a result of patent protection law suits filed in the first quarter of 2006 and generally lower
activity in 2007
|
|
|
(368,000
|
)
|
Increase in costs related to establishing our German subsidiary
|
|
|
546,000
|
|
Other increases
|
|
|
234,000
|
|
|
|
|
|
|
|
|
$
|
2,900,000
|
|
|
|
|
|
|
33
|
|
|
|
|
|
2006 Compared
to 2005
|
Increase in costs related to expansion and setting up direct sales offices in China, Taiwan and Singapore, including costs for labor and
recruiting, offset by a decrease in representative commissions in these regions
|
|
$
|
755,000
|
Increase in stock-based compensation due to the adoption of SFAS No. 123R in the first quarter of 2006
|
|
|
1,068,000
|
Increase in legal costs primarily related to initiating litigation against third parties to protect against the infringement of our patents
and corporate projects
|
|
|
397,000
|
Increase in IT services, labor and software requirements for the network and expansion
|
|
|
476,000
|
Increase in representative commissions in regions other than China, Taiwan and Singapore and other sales expenses, primarily related to
increased revenue
|
|
|
336,000
|
Amortization costs related to our acquisition of eVue assets in the fourth quarter of 2006
|
|
|
130,000
|
Increased marketing and sales expenses, including communications
|
|
|
1,131,000
|
Increase in human resources expenses
|
|
|
249,000
|
Increase in accounting fees, offset by lower Sarbanes-Oxley costs
|
|
|
242,000
|
Other increases
|
|
|
216,000
|
|
|
|
|
|
|
$
|
5,000,000
|
|
|
|
|
We expect that our SG&A expense will increase slightly in 2008 as we hire additional
international sales and support personnel.
Amortization of Purchased Intangibles
Amortization of purchased intangibles includes amortization related to our acquisition of certain assets of the eVue product line in the fourth quarter of 2006, the acquisition of Gryphics, Inc.
in the second quarter of 2007 and the acquisition of certain assets of Synatron GmbH in the third quarter of 2007. Net purchased intangibles totaled $15.0 million at December 31, 2007 and current amortization is approximately $0.6 million per
quarter.
Other Income (Expense)
Other income (expense) typically includes interest income, interest expense, gains and losses on sales of investments and transaction and remeasurement related foreign currency gains and losses. Other income (expense) can also include other
miscellaneous non-operating gains and losses. Transaction related foreign currency gains and losses result from gains and losses recognized on foreign exchange forward contracts and on certain of our accounts receivable that are denominated in
Japanese yen.
Interest income represents interest earned on cash and cash equivalents and investments in marketable securities and totaled
$1.5 million, $1.6 million and $1.1 million, respectively, in 2007, 2006 and 2005. The decrease in 2007 compared to 2006 was due to the use of $14.9 million, net of cash acquired, for the purchase of Gryphics, Inc. in April 2007 and the purchase of
certain assets of Synatron GmbH in July 2007 and the use of $9.5 million during 2007 for the purchase of fixed assets, partially offset by $4.0 million of cash generated by operations, net proceeds from the sale of marketable securities of $18.9
million and $2.0 million of cash from the sale of stock pursuant to our stock plans. These decreases were partially offset by higher interest rates in 2007 compared to 2006. The increase in 2006 compared to 2005 was primarily due to higher average
cash balances in 2006 compared to 2005, as well as higher interest rates in 2006 compared to 2005.
Interest expense was $18,000 in 2005,
of which $16,000 was related to interest on our $7.0 million note payable for the portion of the 30-day prepayment notice period that occurred in January 2005. We gave notice of prepayment and prepaid the remainder of our $7.0 million note payable
and related interest in late December 2004.
34
Other, net was comprised of the following (in thousands):
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Year Ended December 31,
|
|
|
|
2007
|
|
|
2006
|
|
|
2005
|
|
Remeasurement related foreign currency gains (losses)
|
|
$
|
(254
|
)
|
|
$
|
97
|
|
|
$
|
(34
|
)
|
Gains related to foreign currency hedges
|
|
|
238
|
|
|
|
253
|
|
|
|
151
|
|
Settlement income from a service provider
|
|
|
|
|
|
|
|
|
|
|
700
|
|
Other
|
|
|
(103
|
)
|
|
|
(3
|
)
|
|
|
131
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
$
|
(119
|
)
|
|
$
|
347
|
|
|
$
|
948
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The settlement income from a service provider was fully recognized in the second quarter of 2005
and we do not anticipate any additional settlement income in future periods.
Income Taxes
Our provision for income taxes totaled $0.6 million, or 38.7% of income before income taxes, in 2007, $1.5 million, or 29.3% of income before income
taxes, in 2006 and $1.2 million, or 12.4%, of income before income taxes, in 2005.
The 2007 effective tax rate differed from federal
statutory rates primarily due to benefits from research and experimental tax credits, non-deductible SFAS No. 123R stock-based compensation and the non-taxable income for federal tax purposes offset by increases to tax expense related to additions
to tax contingencies recorded during the year and an out-of-period tax adjustment related to inter-company sales and unrealized foreign currency gains and losses.
The 2006 effective tax rate differed from federal statutory rates primarily due to the benefit of non-taxable interest income for federal tax purposes and the reinstatement of the research and development tax credit,
offset by the non-deductible SFAS No. 123R stock-based compensation expense.
Our 2005 effective tax rate differed from federal
statutory tax rates primarily due to higher non-taxable income for both federal and state income tax purposes, utilization of tax credits and the release of prior year valuation allowances since management believes the benefit of these credits is
more likely than not to be utilized in future years.
Deferred tax assets arise from the tax benefit of amounts expensed for financial
reporting purposes but not yet realized for tax purposes and from unutilized tax credits and net operating loss carry forwards. We evaluate our deferred tax assets on a regular basis to determine if a valuation allowance is required. To the extent
it is determined that it is more likely than not that we will not realize the benefit of our deferred tax assets, we record a valuation allowance against deferred tax assets.
At December 31, 2007, we had a net deferred tax liability on our balance sheet totaling $0.4 million, primarily related to deferred tax liabilities recorded in connection with the
Gryphics, Inc. acquisition, offset by deferred tax assets for reserves and research tax credits.
We are currently undergoing an IRS audit
and, in February 2008, we received notification that the audit will disallow certain research and development credits on our returns for which we have not provided a contingency provision. When a formal response is received from the IRS we will
determine whether we need to provide any additional tax contingencies in the first quarter of 2008. In addition, we may enter into a legal dispute with the IRS over this matter and the costs could be significant.
35
Liquidity and Capital Resources
We anticipate meeting our cash requirements for the next 12 months and for the foreseeable future from existing cash, short-term marketable securities and long-term marketable securities, which totaled
$34.3 million at December 31, 2007, as well as from cash expected to be generated from operations. In 2007, we used $14.9 million of cash, net of cash acquired, for acquisitions as discussed in Note 3 of Notes to Consolidated Financial
Statements.
Net cash provided by operating activities in 2007 was $4.0 million and consisted of net income of $0.9 million,
depreciation, amortization and stock-based compensation of $7.0 million and net changes in our operating assets and liabilities as described below.
Accounts receivable, net increased $0.6 million to $18.2 million at December 31, 2007 compared to $17.6 million at December 31, 2006, due primarily to an increase in our days sales outstanding. In addition, a greater
percentage of our revenue was in the last month of the fourth quarter of 2007 as compared to the last month of the fourth quarter of 2006. Our days sales outstanding was approximately 74 days at December 31, 2007 compared to 71 days at
December 31, 2006.
Inventories increased $3.5 million to $18.6 million at December 31, 2007 compared to $15.1 million
at December 31, 2006, primarily due to the timing of systems orders and shipments and the acquisition of Gryphics, Inc. We believe that our inventory levels at December 31, 2007 are adequate given our revenue projections for the first
quarter of 2008.
Deferred income taxes were a net liability of $0.4 million at December 31, 2007 compared to a net asset of $2.7
million at December 31, 2006. The change in deferred income taxes was due primarily to deferred tax liabilities recorded in connection with the Gryphics, Inc. acquisition.
Net cash used in investing activities of $6.5 million in 2007 resulted from $9.5 million used for the purchase of fixed assets and $14.9 million, net of cash acquired, used for the
acquisition of Gryphics, Inc. and certain assets of Synatron GmbH. These uses were offset by a net maturity and sale of marketable securities of $18.9 million. Purchases of fixed assets primarily were for our PPD capacity expansion project. We
anticipate spending approximately $5.0 to $7.0 million in 2008 for fixed assets, primarily for PPD capacity expansion.
Net cash provided
by financing activities of $2.1 million in 2007 resulted primarily from $2.0 million of proceeds from the exercise of employee stock options and the sale of stock pursuant to our employee stock purchase plan and $0.1 million of tax benefits related
to stock option exercises.
Seasonality
Typically, our revenue is lower in our fiscal first quarter than in our fiscal fourth quarter preceding it. In addition, as is typical in our industry, we recognize a large percentage of our quarterly revenue in the last month of the
quarter.
Contractual Commitments
The
following is a summary of our contractual commitments and obligations as of December 31, 2007 (in thousands):
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Payments Due By Period
|
Contractual Obligation
|
|
Total
|
|
2008
|
|
2009 and
2010
|
|
2011 and
2012
|
|
2013 and
beyond
|
Operating Leases
|
|
$
|
16,953
|
|
$
|
2,466
|
|
$
|
4,427
|
|
$
|
4,242
|
|
$
|
5,818
|
Capital Leases
|
|
|
68
|
|
|
15
|
|
|
31
|
|
|
22
|
|
|
|
Purchase Order Commitments
|
|
|
8,507
|
|
|
8,507
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
$
|
25,528
|
|
$
|
10,988
|
|
$
|
4,458
|
|
$
|
4,264
|
|
$
|
5,818
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Purchase order commitments primarily represent open orders for inventory.
36
Critical Accounting Policies and the Use of Estimates
The preparation of financial statements in conformity with U.S. generally accepted accounting principles requires management to make estimates and assumptions. These estimates and assumptions
affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amount of revenue and expenses during the reporting period. It is possible that the
estimates we make may change in the future.
Revenue Recognition
Revenue from product sales to customers that do not have acceptance criteria, including product sales to distributors, is recognized when a written purchase order has been obtained, the product
is shipped, title has transferred, no obligations remain and collectibility is reasonably assured. Generally, we ship our products FOB shipping point. For any shipments with FOB destination terms, we defer revenue until delivery to the customer.
Revenue from customers who have acceptance criteria beyond our standard terms and conditions is deferred until all acceptance criteria are satisfied. Revenue for installation services, consisting of assembly and testing, and for systems shipped to
integrators is also deferred. Deferred revenue related to service contracts is recognized over the life of the contract, typically one to two years. Deferred revenue for systems shipped to integrators is recognized upon shipment to the final
customer.
Our transactions may involve the sale of systems and services under multiple element arrangements. Revenue under multiple
element arrangements is allocated based on the fair value of each element. A typical multiple element arrangement may include some or all of the following components: products, accessories, installation services and extended warranty contracts. The
total sales price is allocated based on the relative fair value of each component when sold separately.
Allowance for Doubtful Accounts
The allowance for doubtful accounts is estimated based on past collection history and known trends with current customers. Our estimates
for allowance for doubtful accounts are reviewed and updated on a quarterly basis. Changes to the reserve occur based upon changes in revenue levels, associated balances in accounts receivable and estimated changes in collectibility.
Valuation of Excess and Obsolete Inventory
We
regularly analyze the value of our inventory based on a combination of factors including, but not limited to, the following: forecasted sales or usage, historical usage rates, estimated service period, product end-of-life dates, estimated current
and future market values, service inventory requirements and new product introductions. Inventories are stated at the lower of standard cost, which approximates cost computed on a first-in, first-out basis, or market and include materials, labor and
manufacturing overhead. Inventory is reviewed for obsolescence and excess quantities on a quarterly basis, based on estimated future use of quantities on hand, which is determined based on past usage, planned changes to products and known trends in
markets and technology. Because of the long-lived nature of many of our products, we maintain a supply of parts for possible use in future repairs and customer field service. As these service parts become older, we apply a higher write-down against
the recorded balance, recognizing that the older the part, the less likely it will be used. If circumstances related to our inventories change, our estimates of the value of inventory could materially change. Inventory write-downs are recorded
quarterly as a component of cost of sales.
Lives and Recoverability of Equipment and Other Long-Lived Assets
We evaluate the remaining lives and recoverability of equipment and other assets, including intangible assets, whenever events or changes in circumstances
indicate that the carrying amount of the asset may not be recoverable in accordance with SFAS No. 144, Accounting for the Impairment or Disposal of Long-Lived Assets. If there is an indication of impairment, we prepare an estimate
of future, undiscounted cash flows expected to result from the use of the asset and its eventual disposition. If these cash flows are less than the carrying value of the asset, we adjust the carrying amount of the
37
asset to its estimated fair value. We have not recorded any impairment charges for long-lived assets during 2007, 2006 or 2005.
Warranty Liabilities
Warranty costs include
labor to repair the system and replacement parts for defective items, as well as other costs incidental to warranty repairs. We estimate a liability for costs to repair or replace products under warranties ranging from 90 days to one-year and
technical support costs when the related product revenue is recognized. The products are sold without a right of return or price protection rights. The liability for product warranties is calculated as a percentage of sales. The percentage is based
on historical actual product repair costs. Our estimated warranty costs are reviewed and updated on a quarterly basis. We anticipate our future warranty reserve accrual rate to be approximately 1% of revenue. Changes to the reserve occur as volume,
product mix and actual warranty costs fluctuate.
Deferred Tax Asset Valuation Allowance
We record deferred tax assets for the estimated future benefit of research and development tax credits, foreign tax credits, net operating loss
carryforwards and other temporary differences to the extent management believes these assets will be realized. A valuation allowance is recorded when management can not reach the conclusion that it is more likely than not that the deferred tax
assets will be realized. At December 31, 2007, we had gross deferred tax liabilities on our balance sheet totaling $0.4 million, primarily related to deferred tax liabilities recorded in connection with the Gryphics, Inc. acquisition,
offset by timing differences in the recognition of certain reserves and accruals. The valuation allowance against deferred tax assets totaled $2.1 million at December 31, 2007. We believe it is more likely than not that the benefits of the
unreserved assets will be realized. We may record additional valuation allowances in the future.
Uncertainty in Income Taxes
On January 1, 2007, we adopted the provisions of FASB Interpretation No. 48, Accounting for Uncertainty in Income Taxes, which
defines the threshold for recognizing the benefits of tax return positions in the financial statements as more-likely-than-not to be sustained by the taxing authority. Interpretation No. 48 applies to all tax positions accounted for
under SFAS No. 109, Accounting for Income Taxes. In accordance with paragraph 19, we elected to continue to treat interest and penalties accrued on unrecognized tax benefits as tax expense within our financial statements. At
December 31, 2007, we had unrecognized tax benefits of $1.1 million, of which $0.9 million would have an impact on the effective tax rate, and interest and penalties accrued on unrecognized tax benefits were $0.2 million. Although we cannot be
certain of the final outcome of any ongoing tax examinations, we believe it is reasonably possible that the total amount of unrecognized benefits will decrease in the range of $0.7 million to $0.9 million within the next 12 months.
Stock-Based Compensation
On January 1,
2006, we adopted SFAS No. 123R, Share-Based Payment, which requires the measurement and recognition of compensation expense for all share based payment awards granted to our employees and directors, including employee stock options,
non-vested stock and stock purchases related to our employee stock purchase plan based on the estimated fair value of the award on the grant date. Upon the adoption of SFAS No. 123R, we maintained our method of valuation for stock option
awards using the Black-Scholes valuation model, which has historically been used for the purpose of providing pro-forma financial disclosures in accordance with SFAS No. 123.
The use of the Black-Scholes valuation model to estimate the fair value of stock option awards requires us to make judgments on assumptions regarding the risk-free interest rate, expected
dividend yield, expected term and expected volatility over the expected term of the award. The assumptions used in calculating the fair value of share-based payment awards represent managements best estimates, but these estimates involve
inherent uncertainties and the application of expense could be materially different in the future.
38
Compensation expense is only recognized on awards that ultimately vest. Therefore, we have reduced
the compensation expense to be recognized over the vesting period for anticipated future forfeitures. Forfeiture estimates are based on historical forfeiture patterns. We update our forfeiture estimates quarterly and recognize any changes
to accumulated compensation expense in the period of change. If actual forfeitures differ significantly from our estimates, our results of operations could be materially impacted.
New Accounting Pronouncements
See Note 2 of Notes to Consolidated Financial Statements included in
Item 8 of this Form 10-K for a discussion of new accounting pronouncements.
Off-Balance Sheet Arrangements
We do not have any off-balance sheet arrangements that have or are reasonably likely to have a material current or future effect on our financial
condition, changes in financial condition, revenue or expenses, results of operations, liquidity, capital expenditures or capital resources.
ITEM 7A.
|
QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
|
Foreign Currency Exchange Risk
We sometimes attempt to mitigate our currency exposures for recorded transactions by
using forward exchange contracts. The purpose of these activities is to reduce the risk that future cash flows of the underlying assets and liabilities will be adversely affected by changes in exchange rates. In some cases, we enter into forward
sale or purchase contracts for foreign currencies, primarily the Japanese yen, to hedge specific receivables and bookings positions. As of December 31, 2007, we had contracts outstanding for the purchase of Japanese yen totaling approximately
$2.5 million, which mature through January 2008.
Historically, we have not attempted to mitigate the impact of foreign currency
fluctuations on the remeasurement of our subsidiaries net assets and results of operations, nor do we enter into derivative financial instruments for speculative purposes.
Our forward exchange contracts do not qualify for hedge accounting treatment in accordance with SFAS No. 138, Accounting for Certain Derivative Instruments and Certain Hedging
Activities an amendment of SFAS No. 133, and, accordingly, gains and losses on our forward exchange contracts are recognized currently as a component of other income (expense).
Interest Rate Risk
Our exposure to market
risk from changes in interest rates relates primarily to our investments. The primary objective of our investment activities is to preserve principal while maximizing yields without significantly increasing risk. This is accomplished by investing in
diversified investments, consisting only of investment grade securities.
As of December 31, 2007, we held cash, cash equivalents and
short-term marketable securities of $29.4 million. Declines of interest rates over time would reduce our interest income from our highly liquid short-term investments. A decrease in interest rates of one percent would cause a corresponding
decrease in our annual interest income related to our cash, cash equivalents and marketable securities of approximately $294,000, assuming our December 31, 2007 balances remained constant. Due to the nature of our highly liquid cash
equivalents, a change in interest rates would not materially affect the fair market value of our cash and cash equivalents.
As of
December 31, 2007, we held long-term fixed rate investments of $4.8 million that consisted primarily of municipal obligations. An increase or decrease in interest rates would not have a material impact on our results of operations, financial
position or cash flows, as we have classified our securities as available-for-sale and, therefore, may choose to sell or hold them as changes in the
39
market occur. Declines in interest rates over time would reduce our interest income from our long-term investments, as funds are re-invested at current
market interest rates.
ITEM 8.
|
CONSOLIDATED FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA
|
The financial statements and notes thereto required by this item begin on page F-1 of this document, as listed in Item 15 of Part IV. Unaudited quarterly financial data for each of the eight quarters in the two-year period ended
December 31, 2007 was as follows:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
In thousands, except per share data
|
|
1
st
Quarter
|
|
2
nd
Quarter
|
|
3
rd
Quarter
|
|
|
4
th
Quarter
|
|
2007
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Revenue
|
|
$
|
22,471
|
|
$
|
24,116
|
|
$
|
21,343
|
|
|
$
|
21,992
|
|
Gross profit
|
|
|
10,262
|
|
|
10,803
|
|
|
9,888
|
|
|
|
10,168
|
|
Net income (loss)
|
|
|
1,048
|
|
|
238
|
|
|
(216
|
)
|
|
|
(140
|
)
|
Basic net income (loss) per share
(1)
|
|
|
0.09
|
|
|
0.02
|
|
|
(0.02
|
)
|
|
|
(0.01
|
)
|
Diluted net income (loss) per share
(1)
|
|
|
0.09
|
|
|
0.02
|
|
|
(0.02
|
)
|
|
|
(0.01
|
)
|
2006
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Revenue
|
|
$
|
19,699
|
|
$
|
19,598
|
|
$
|
22,950
|
|
|
$
|
22,605
|
|
Gross profit
|
|
|
8,567
|
|
|
8,746
|
|
|
9,914
|
|
|
|
9,815
|
|
Net income
|
|
|
656
|
|
|
796
|
|
|
1,232
|
|
|
|
926
|
|
Basic net income per share
(1)
|
|
|
0.06
|
|
|
0.07
|
|
|
0.11
|
|
|
|
0.08
|
|
Diluted net income per share
(1)
|
|
|
0.06
|
|
|
0.07
|
|
|
0.10
|
|
|
|
0.08
|
|
(1)
|
Quarterly per share amounts may not add to yearly totals due to rounding.
|
ITEM 9.
|
CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE
|
None.
ITEM 9A.
|
CONTROLS AND PROCEDURES
|
Managements Report on Internal
Control Over Financial Reporting
Our management is responsible for establishing and maintaining adequate internal control over
financial reporting, as such term is defined in Exchange Act Rules 13a 15(f). Under the supervision and with the participation of our management, including our principal executive officer and principal financial officer, we conducted an
evaluation of the effectiveness of our internal control over financial reporting based on the framework in
Internal Control Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO).
Based on our evaluation under the framework in
Internal Control Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO)
, our management concluded that our internal control over
financial reporting was effective as of December 31, 2007.
Our independent registered public accounting firm, KPMG LLP, has issued an
audit report on the effectiveness of our internal control over financial reporting as of December 31, 2007. Their report appears below.
Changes in
Internal Control Over Financial Reporting
There has been no change in our internal control over financial reporting that occurred
during our last fiscal quarter that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.
Disclosure Controls and Procedures
Our management has evaluated, under the supervision and with the participation of our
Chief Executive Officer and Chief Financial Officer, the effectiveness of our disclosure controls and procedures as of the end of the period covered by this report pursuant to Rule 13a-15(b) under the
40
Securities Exchange Act of 1934 (the Exchange Act). Based on that evaluation, our Chief Executive Officer and Chief Financial Officer have
concluded that, as of the end of the period covered by this report, our disclosure controls and procedures are effective in ensuring that information required to be disclosed in our Exchange Act reports is (1) recorded, processed, summarized
and reported in a timely manner, and (2) accumulated and communicated to our management, including our Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure.
We acquired Gryphics, Inc. on April 3, 2007 and certain assets of Synatron GmbH on July 3, 2007. In connection with these acquisitions, we are
reviewing our internal control over financial reporting and implementing new processes and procedures to integrate the activities associated with accounting for Gryphics, Inc and the operations of our German subsidiary, Cascade Microtech GmbH. We
have excluded Gryphics, Inc. and Cascade Microtech, GmbH, with total assets of $34.0 million and revenues of $4.3 million, from our assessment of the effectiveness of our internal control over financial reporting as of December 31, 2007.
Limitation on Effectiveness of Controls
Our management, including our Chief Executive Officer and Chief Financial Officer, do not expect that our disclosure controls and procedures or our internal control over financial reporting will prevent or detect all errors and all
occurrences of fraud. A control system, no matter how well designed and operated, can provide only reasonable, not absolute, assurance that the objectives of the control systems are met. Further, the design of a control system must reflect the fact
that there are resource constraints, and the benefits of all controls must be considered relative to their costs. Control systems can be circumvented by the individual acts of some persons, by collusion of two or more people, or by management
override of the control. In addition, over time, controls may become inadequate because of changes in conditions, or the degree of compliance with the policies or procedures may deteriorate. Because of the inherent limitations in all control
systems, no evaluation of controls can provide absolute assurance that the control systems will detect all control issues, including instances of fraud, if any.
Report of Independent Registered Public Accounting Firm
The Board of Directors and Shareholders
Cascade Microtech, Inc.:
We have audited
Cascade Microtech, Inc.s (the Company) internal control over financial reporting as of December 31, 2007, based on criteria established in
Internal Control - Integrated Framework
issued by the Committee of Sponsoring
Organizations of the Treadway Commission (COSO).
The Companys management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial
reporting, included in the accompanying Managements Report on Internal Control over Financial Reporting. Our responsibility is to express an opinion on the Companys internal control over financial reporting based on our audit.
We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards
require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control
over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audit also included performing such other procedures
as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.
A companys
internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted
accounting principles. A companys internal control over financial reporting includes those policies and procedures that (1) pertain
41
to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2)
provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only
in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the companys assets that could have
a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not
prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies
or procedures may deteriorate.
In our opinion, the Company maintained, in all material respects, effective internal control over financial
reporting as of December 31, 2007, based on criteria established in
Internal Control - Integrated Framework
issued by the Committee
of Sponsoring Organizations of the Treadway Commission (COSO)
.
The Company acquired Gryphics, Inc. and Cascade Microtech GmbH during 2007, and management excluded from its assessment of the effectiveness of internal
control over financial reporting as of December 31, 2007, Gryphics, Inc.s and Cascade Microtech GmbHs internal control over financial reporting associated with total assets of $34,027,000 and total revenues of $4,304,000 included in the
consolidated financial statements of Cascade Microtech, Inc. and subsidiaries as of and for the year ended December 31, 2007. Our audit of internal control over financial reporting of the Company also excluded an evaluation of the internal control
over financial reporting of Gryphics, Inc. and Cascade Microtech GmbH.
We also have audited, in accordance with the standards of the
Public Company Accounting Oversight Board (United States), the consolidated balance sheets of Cascade Microtech, Inc. and subsidiaries as of December 31, 2007 and 2006, and the related consolidated statements of operations, shareholders
equity, and cash flows for each of the years in the three-year period ended December 31, 2007, and our report dated March 17, 2008
expressed an unqualified opinion on those consolidated financial statements
.
/s/ KPMG LLP
Portland, Oregon
March 17, 2008
ITEM 9B.
|
OTHER INFORMATION
|
None.
Cascade Microtech, Inc.
Notes to Consolidated Financial Statements
NOTE 1. SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES
Nature of
Business
We are involved in the development, manufacturing and selling of wafer probing solutions for the electrical measurement
and test of integrated circuits, or ICs. We design, manufacture and assemble products in Beaverton, Oregon, with global sales, service and support centers in North America, Europe, Japan, Singapore, Taiwan and China.
Principles of Consolidation
The consolidated
financial statements include the accounts of Cascade Microtech, Inc. and its wholly owned subsidiaries. All significant intercompany accounts and transactions have been eliminated.
The functional currency of our foreign subsidiaries is the U.S. dollar. Nonmonetary balance sheet items are remeasured at historical rates and monetary balance sheet items are remeasured at
current rates. Exchange gains and losses from remeasurement of monetary assets and liabilities are recognized currently in our consolidated statements of operations.
Use of Estimates in Financial Reporting
The preparation of financial statements in conformity
with U.S. generally accepted accounting principles requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial
statements, as well as revenues and expenses reported for the periods presented. On an on-going basis, we evaluate our estimates, including those related to revenue recognition, allowance for doubtful accounts, valuation of excess and obsolete
inventory, lives and recoverability of equipment and other long-lived assets, warranty liabilities, deferred tax asset valuation allowance, unrecognized tax benefits, stock-based compensation, contingencies and litigation. We base our estimates on
historical experience and on various other assumptions that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily
apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions.
Cash and Cash Equivalents
Included in cash and cash equivalents were cash equivalents of $65,000 and $342,000 at December 31, 2007 and 2006,
respectively, which consisted of money market funds, and are stated at cost, which approximates market value. We consider all highly liquid investments with an original maturity of three months or less to be cash equivalents.
Marketable Securities
We account for our
marketable securities in accordance with Statement of Financial Accounting Standards (SFAS) No. 115, Accounting for Certain Investments in Debt and Equity Securities. We classify our marketable securities as
available-for-sale and, accordingly, record them at current market value. Unrealized holding gains and losses are excluded from earnings and are reported as a separate component of shareholders equity until realized. Dividend and interest
income is recognized when earned. Realized gains and losses are included in earnings and are derived using the specific identification method for determining the cost of securities sold.
We periodically evaluate whether declines in fair values of our investments below their cost are other-than-temporary. This evaluation consists of qualitative and quantitative factors
regarding the severity and duration of the unrealized loss, as well as our ability and intent to hold the investment until a forecasted recovery occurs.
F-6
Trade Accounts Receivable
Trade accounts receivable are recorded at their invoiced amount and do not bear interest. The allowance for doubtful accounts is our best estimate of the amount of probable credit losses in our existing accounts
receivable. We determine our allowance for doubtful accounts utilizing historical collection percentages considering the aging of the accounts and known trends with current customers, including recent significant changes in their financial position.
The provision for doubtful accounts totaled $67,000, $114,000 and $15,000, respectively, in 2007, 2006 and 2005. The allowance for
doubtful accounts totaled $203,000 and $153,000, respectively, at December 31, 2007 and 2006. Historically, write-offs have been insignificant.
Inventories
Inventories are stated at the lower of standard cost, which approximates cost computed on a first-in, first-out basis,
or market, and include materials, labor and manufacturing overhead. Demonstration goods, which are included as a component of finished goods, represent inventory that is used for customer demonstration purposes. This inventory is typically sold
after 12 to 18 months. We analyze the carrying value of our inventory quarterly, considering a combination of factors including, but not limited to, the following: forecasted sales or usage, historical usage rates, estimated service period, product
end-of-life dates, estimated current and future market values, service inventory requirements and new product introductions. We estimate market value based on factors including, but not limited to, replacement cost and estimated resale value.
Write-downs of inventory totaled $519,000, $285,000 and $125,000, respectively, in 2007, 2006 and 2005.
Fair Value of Financial Instruments
The carrying value of cash and cash equivalents, accounts receivable, accounts payable and accrued liabilities approximate fair value due
to their short maturities. The fair value of our capital lease obligations approximate carrying value as such instruments stated interest rates do not differ significantly from current market rates.
Fixed Assets
Equipment and leasehold
improvements are stated at cost. Equipment under capital lease is recorded at the net present value of the future minimum lease payments at the inception of the lease. Maintenance and repairs are expensed as incurred. We do not accrue for the future
cost of periodic major overhauls and planned maintenance of plant and equipment in annual or interim periods. Depreciation of owned equipment is provided using the straight-line method over the estimated useful lives of the assets, ranging from two
to seven years. Amortization of equipment under capital leases and leasehold improvements is provided using the straight-line method over the life of the lease or the useful life of the asset, whichever is shorter. We did not capitalize any interest
during 2007, 2006 or 2005.
Goodwill
Goodwill represents the excess of the aggregate purchase price over the fair value of the net assets acquired in a purchase business combination. Goodwill is not amortized but rather is reviewed for impairment at least annually, or more
frequently if a triggering event occurs, in accordance with the provisions of SFAS No. 142, Goodwill and Other Intangible Assets. The goodwill impairment test is a two-step test. Under the first step, the fair value of the reporting
unit is compared with its carrying value, and if an indication of goodwill impairment exists for the reporting unit, the enterprise must perform step two of the impairment test (measurement). Under step two, an impairment loss is recognized for any
excess of the carrying amount of the reporting units goodwill as determined by allocating the fair value of the reporting unit in a manner similar to a purchase price allocation in accordance with SFAS No. 141, Business
Combinations. The residual fair value after this allocation is the implied fair value of the reporting unit goodwill. Fair value of the reporting unit is determined using a discounted cash flow analysis. If the fair value of the reporting unit
exceeds its carrying value, step two does not need to be performed.
We performed our annual impairment review of goodwill in the fourth
quarter of each year and concluded that there was no impairment in 2007 or 2006.
F-7
Purchased Intangible Assets
Purchased intangible assets at December 31, 2007 and 2006 included various intangible assets acquired with our acquisition of certain assets of the eVue product line in the fourth quarter of 2006, the acquisition
of Gryphics, Inc. in the second quarter of 2007 and the acquisition of certain assets of Synatron GmbH in the third quarter of 2007. These assets are amortized using the straight-line method over their estimated useful lives of one to ten years.
Purchased intangible assets are reviewed for impairment as discussed below under Accounting for the Impairment of Long-Lived Assets. There is no significant residual value for any of the purchased intangible assets.
Other Assets
Other assets at
December 31, 2007 and 2006 included various patents and other long-term assets with definite useful lives. These assets are amortized using the straight-line method over estimated useful lives of one to eight years and have no significant
residual value. Patents and other assets with determinable lives are reviewed for impairment as discussed below under Accounting for the Impairment of Long-Lived Assets.
Accounting for the Impairment of Long-Lived Assets
Long-lived assets held and used by us,
including patents and intangible assets with determinable lives are reviewed for impairment whenever events or circumstances indicate that the carrying amount of assets may not be recoverable in accordance with SFAS No. 144, Accounting
for the Impairment or Disposal of Long-Lived Assets. We evaluate recoverability of assets to be held and used by comparing the carrying amount of an asset to future net undiscounted cash flows to be generated by the asset. If such assets are
considered to be impaired, the impairment to be recognized is measured as the amount by which the carrying amount of the assets exceeds the fair value of the assets. Such reviews assess the fair value of the assets based upon estimates of discounted
future cash flows that the assets are expected to generate. We did not record any impairment charges against our long-lived assets during 2007, 2006 or 2005.
Revenue Recognition
We sell or deliver our products to the end-user through distributors, manufacturers
representatives and integrators:
|
|
|
distributors purchase our products directly from us and pay us directly according to our standard terms and conditions. They then resell the products to end
users at prices and terms set by them;
|
|
|
|
manufacturers representatives are independent companies that agree to sell our products at our prices and on our terms and they are paid a commission based
on a percentage of their sales of our products; and
|
|
|
|
integrators design and assemble application specific measurement solutions consisting of products from two or more companies. They typically do not purchase our
products directly from us. The end user is billed directly and is liable to us for the purchase of the products. The integrator is paid a fee by the end user.
|
Revenue from product sales to customers that do not have special acceptance criteria, including product sales to distributors and manufacturers representatives, is recognized when a written
purchase order has been obtained, the price is fixed and determinable, the product is shipped, title has transferred and collectibility is reasonably assured. Generally, we ship our products FOB shipping point. For any shipments with FOB destination
terms, we defer revenue until delivery to the customer. Revenue from customers who have special acceptance criteria is not recognized until all acceptance criteria are satisfied. Revenue for installation services, consisting of assembly and testing,
is recognized when the services are performed.
Our transactions may involve the sale of systems and services under multiple element
arrangements. A typical multiple element arrangement may include some or all of the following: products, accessories, installation services or extended warranty contracts. For any arrangements with multiple elements, we recognize revenue only after
we have determined that elements with stand alone value have been delivered to customers and any undelivered elements have objective and reliable evidence of fair value.
F-8
We record deferred revenue for service contracts and for custom engineering probe stations and other
systems requiring special acceptance criteria from the customer. Deferred revenue related to service contracts is recognized over the life of the contract, typically one to two years. For systems shipped to integrators, no revenue is recognized
until shipment to the end user. Deferred revenue related to shipped systems requiring acceptance by the customer is recognized upon receipt of such acceptance.
Sales Returns
Customers may return standard products for any reason within 30 days after delivery, provided that the return is
received in its original condition, including all packing materials, for a refund, less a stocking charge. Custom products are non-refundable unless agreed to in writing by us. For certain products, we also provide for a credit against the purchase
of future products. We recognize revenue for products with a right of return in accordance with the revenue recognition policies discussed above. Historically, sales returns have not been significant.
Shipping and Handling Costs
Shipping and
handling costs are included as a component of cost of sales.
Significant Customers
No customer in 2007, 2006 or 2005 accounted for 10% or more of our total revenues and no customers accounted for 5% or more of our gross accounts receivable balance at December 31, 2007 or
2006.
Product Warranty
We
estimate a liability for costs to repair or replace products under warranties for a period of approximately twelve months and technical support costs when the related product revenue is recognized. The products are sold without a right of return or
price protection rights. The liability for product warranties is calculated as a percentage of sales. The percentage is based on historical actual product repair costs. The liability for product warranties is included in accrued liabilities on our
consolidated balance sheet. Product warranty activity was as follows (in thousands):
|
|
|
|
|
Warranty accrual, December 31, 2004
|
|
$
|
365
|
|
Reductions for warranty charges
|
|
|
(501
|
)
|
Additions to warranty reserve
|
|
|
624
|
|
|
|
|
|
|
Warranty accrual, December 31, 2005
|
|
|
488
|
|
Reductions for warranty charges
|
|
|
(525
|
)
|
Additions to warranty reserve
|
|
|
573
|
|
|
|
|
|
|
Warranty accrual, December 31, 2006
|
|
|
536
|
|
Reductions for warranty charges
|
|
|
(637
|
)
|
Additions to warranty reserve
|
|
|
602
|
|
|
|
|
|
|
Warranty accrual, December 31, 2007
|
|
$
|
501
|
|
|
|
|
|
|
Advertising
Advertising costs are expensed as incurred and totaled $251,000, $393,000 and $196,000 in 2007, 2006 and 2005, respectively.
Research and Development
Research and development costs are expensed as incurred.
Forward Exchange Contracts
We account for
forward exchange contracts in accordance with SFAS No. 138, Accounting for Certain Derivative Instruments and Certain Hedging Activities - an amendment of FASB Statement No. 133 and SFAS No. 137, Accounting for
Derivative Instruments and Hedging Activities. SFAS Nos. 137 and 138 are amendments to SFAS No. 133, Accounting for Derivative Instruments and Hedging Activities. SFAS Nos. 133, 137 and 138 establish accounting and
reporting standards requiring that every derivative instrument (including certain derivative instruments embedded in other contracts) be recorded on the balance sheet as either an asset or liability measured at its fair value. SFAS Nos. 137 and 138
require that changes in the derivatives fair value be recognized currently in earnings unless specific hedge accounting criteria are met. Special accounting for qualifying hedges allows a derivatives gains and
F-9
losses to offset related results on the hedged item in the income statement, and requires that a company must formally document, designate and assess the
effectiveness of transactions that receive hedge accounting.
At times, we enter into forward foreign currency exchange contracts, which typically expire
within six months, to manage our exposure against foreign currency fluctuations on sales denominated in Japanese yen. These foreign exchange contracts are not considered hedges under SFAS No. 138, and as such are recorded at fair value on the
balance sheet with any changes in fair value included as other income (expense), net on our statements of operations. At December 31, 2007 and 2006, we had $2.5 million and $4.5 million, respectively, of forward exchange contracts outstanding.
The estimated fair value of the contracts outstanding at December 31, 2007 and 2006 was $2.5 million and $4.4 million, respectively.
Income Taxes
We account for income taxes in accordance with SFAS No. 109, Accounting for Income
Taxes. Accordingly, deferred income taxes are established for the difference between the financial reporting and income tax basis of assets and liabilities as well as operating loss and tax credit carryforwards. Deferred tax assets are reduced
by a valuation allowance when, in the opinion of management, it is more likely than not that some portion of the deferred tax assets will not be realized. Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to
taxable income in the years in which those temporary differences are expected to be recovered or settled. The effect on deferred taxes of a change in tax rates is recognized in income in the period that includes the enactment date.
Effective January 1, 2007, we adopted the provisions of Financial Accounting Standards Board (FASB) Interpretation No. 48, Accounting for
Uncertainty in Income Taxes, which defines the threshold for recognizing the benefits of tax return positions in the financial statements as more-likely-than-not to be sustained by the taxing authority. Interpretation No. 48
applies to all tax positions accounted for under SFAS No. 109. In accordance with paragraph 19, we elected to treat interest and penalties accrued on unrecognized tax benefits as tax expense within our financial statements. Upon adoption, we
analyzed our tax positions to determine if there were any that were more-likely-than-not to be sustained as of the adoption date. Based on this analysis, we determined that no adjustment was required upon adoption of Interpretation
No. 48. At the date of adoption, we had unrecognized tax benefits of $0.7 million, of which $0.4 million would have an impact on the effective tax rate, and interest and penalties accrued on unrecognized tax benefits were $49,000.
Taxes Collected from Customers and Remitted to Governmental Authorities
We account for tax assessed by a governmental authority that is directly imposed on a revenue-producing transaction (i.e., sales, use, value added) on a net (excluded from revenue) basis.
Net Income Per Share
We compute net income
per share in accordance with SFAS No. 128, Earnings Per Share. Under the provisions of SFAS No. 128, basic net income per share is computed by dividing the net income attributed to common shareholders for the period by the
weighted average number of shares of common stock outstanding during the period. Diluted net income per share incorporates the incremental shares issuable upon the assumed exercise of stock options and warrants using the treasury stock method, if
dilutive.
F-10
The following table reconciles the shares used in calculating basic net income per share to the shares
used in calculating diluted net income per share (in thousands):
|
|
|
|
|
|
|
Year Ended December 31,
|
|
2007
|
|
2006
|
|
2005
|
Shares used to calculate basic net income per share
|
|
12,550
|
|
11,482
|
|
11,055
|
Incremental shares
|
|
290
|
|
477
|
|
761
|
|
|
|
|
|
|
|
Shares used to calculate diluted net income per share
|
|
12,840
|
|
11,959
|
|
11,816
|
|
|
|
|
|
|
|
Outstanding stock options not considered as they would have been antidilutive
|
|
871
|
|
727
|
|
296
|
|
|
|
|
|
|
|
Stock-Based Compensation
Effective January 1, 2006, we adopted SFAS No. 123R, Share-Based Payment. We elected to use the modified prospective transition method as provided by SFAS No. 123R and,
accordingly, financial statement amounts for the prior periods presented have not been restated to reflect the fair value method of expensing stock-based compensation. Under this method, the provisions of SFAS No. 123R apply to all awards
granted or modified after the date of adoption. Our deferred compensation balance of $142,000 as of December 31, 2005, which was accounted for under Accounting Principles Board (APB) Opinion No. 25, Accounting for Stock
Issued to Employees, was reclassified into additional paid in capital upon the adoption of SFAS No. 123R. In addition, the unrecognized expense of awards not yet vested at the date of adoption is recognized in the net income in the
periods after the date of adoption using the Black-Scholes valuation method over the remainder of the requisite service period. The cumulative effect of the change in accounting principle from APB 25 to SFAS No. 123R was not material.
Prior to January 1, 2006, we accounted for stock options using the intrinsic value method and recognized the value of awards on a
straight-line basis over the vesting period of the award as prescribed by APB 25. We provided disclosures of net income and earnings per share as if the method prescribed by SFAS No. 123, Accounting for Stock-Based
Compensation, had been applied in measuring compensation expense as follows (in thousands, except per share amounts):
|
|
|
|
|
Year Ended December 31,
|
|
2005
|
|
Net income attributed to common shareholders, as reported
|
|
$
|
8,319
|
|
Add stock-based compensation included in reported net income, net of tax
|
|
|
107
|
|
Fair value of stock-based employee compensation, net of tax
|
|
|
(1,849
|
)
|
|
|
|
|
|
Net income, pro forma
|
|
$
|
6,577
|
|
|
|
|
|
|
Net income per share basic, as reported
|
|
$
|
0.75
|
|
|
|
|
|
|
Net income per share basic, pro forma
|
|
$
|
0.59
|
|
|
|
|
|
|
Net income per share diluted, as reported
|
|
$
|
0.70
|
|
|
|
|
|
|
Net income per share diluted, pro forma
|
|
$
|
0.56
|
|
|
|
|
|
|
To determine stock-based compensation included in reported net income, net of tax, we used a tax
rate approximating our effective tax rate of 12.4% for 2005.
Comprehensive Income
Pursuant to SFAS No. 130, Reporting Comprehensive Income, comprehensive income is defined as changes in shareholders equity exclusive of transactions with owners, such as
capital contributions and dividends. Unrealized holding gains and losses on our available-for-sale marketable securities are included as a separate component of shareholders equity until realized. The differences between net income (loss) and
comprehensive income (loss) for the periods presented are not material.
Reclassifications
Certain reclassifications have been made to the prior period financial statements to conform with the current period presentation.
F-11
Certain Risks and Uncertainties
Our future operating results and financial condition are subject to influences driven by rapid technological changes, a highly competitive industry, a lengthy sales cycle, and the cyclical nature
of general economic conditions. Future operating results will depend on many factors, including demand for our products, the introduction and industry acceptance of new products and the level and timing of available shippable orders and backlog.
In addition, we rely on several suppliers to provide certain key components used in our products. Some of these items are available from
only one supplier or a limited group of suppliers. Any disruption in the availability and delivery of these items could adversely affect our revenues.
Segment Reporting
Based upon the requirements of SFAS No. 131, Disclosures about Segments of an
Enterprise and Related Information, we have determined that we operate in two business segments: the Engineering Products Division (EPD) and the Production Products Division (PPD). Our engineering probe stations,
analytical probes and probing accessories are sold EPD. Our production probe cards and test sockets are sold through PPD.
NOTE 2. NEW ACCOUNTING
PRONOUNCEMENTS
SFAS No. 141R
In December 2007, the FASB issued SFAS No. 141R (revised 2007), Business Combinations, which replaces SFAS No. 141, Business Combinations. SFAS No. 141R establishes principles and requirements for how
an acquirer recognizes and measures in its financial statements the identifiable assets acquired, including goodwill, the liabilities assumed and any non-controlling interest in the acquiree. SFAS No. 141R also establishes disclosure
requirements to enable users of the financial statements to evaluate the nature and financial effects of a business combination. SFAS No. 141R is effective for business combinations that occur after January 1, 2009.
EITF 07-3
In June 2007, the Emerging Issues
Task Force (EITF) issued EITF 07-3, Accounting for Advance Payments for Goods or Services to Be Used in Future Research and Development Activities, which states that non-refundable advance payments for services that will be
consumed or performed in a future period in conducting research and development activities on behalf of the company should be recorded as an asset when the advance payment is made and then recognized as an expense when the research and development
activities are performed. EITF 07-3 is applicable prospectively to new contractual arrangement entered into in fiscal years beginning after December 15, 2007. We are analyzing the effect of the adoption of EITF 07-3.
SFAS No. 159
In February 2007, the FASB
issued SFAS No. 159, The Fair Value Option for Financial Assets and Financial Liabilities, which permits entities to choose to measure many financial instruments and certain other items at fair value. SFAS No. 159 is effective
as of the beginning of an entitys first fiscal year that begins after November 15, 2007. We are currently in the process of analyzing the impact of adopting SFAS No. 159 on our financial position and results of operations.
SFAS No. 157
In September
2006, the FASB issued SFAS No. 157, Fair Value Measurements, which establishes a single authoritative definition of fair value, sets out a framework for measuring fair value and requires additional disclosures about fair-value
measurements. SFAS No. 157 is effective for financial assets and liabilities for fiscal years beginning after November 15, 2007. The effective date for non-financial assets and liabilities that are not required or permitted to be
recognized or disclosed at fair value on a recurring basis has been deferred to fiscal years beginning after November 15, 2008. We are currently in the process of analyzing the impact of applying SFAS No. 157 on our financial position and
results of operations.
F-12
NOTE 3. ACQUISITIONS
eVue
During the fourth quarter of 2006, we acquired certain assets and liabilities related to the eVue product line
from our strategic partner in a transaction which was accounted for as a business acquisition. These assets included technology, design information for the manufacture of subassemblies and other intangibles. The results of this acquisition have been
included in the consolidated financial statements since the date of acquisition as part of our EPD segment. The purchase price consisted of $4.0 million in cash, paid to the seller, plus other direct costs including attorney and other fees of
$35,000. In addition, based on the seller completing certain milestones related to the eVue product line by December 31, 2007, we accrued an additional $1.0 million to be paid to the seller in the first quarter of 2008. The additional $1.0
million payment was recorded as goodwill. Goodwill will not be a amortized, but will be periodically evaluated for potential impairment. None of the goodwill will be deductible for income tax purposes.
The purchase price, including the additional $1.0 million, was allocated as follows (in thousands):
|
|
|
|
|
|
|
|
|
|
|
|
Useful Life
|
Inventory
|
|
$
|
119
|
|
|
|
Patent technology
|
|
|
961
|
|
|
8 years
|
Developed software technology
|
|
|
165
|
|
|
3 years
|
Customer backlog
|
|
|
77
|
|
|
1 year
|
Customer relationships
|
|
|
1,537
|
|
|
7 years
|
Goodwill
|
|
|
2,295
|
|
|
indefinite
|
|
|
|
|
|
|
|
|
|
|
5,154
|
|
|
|
Current liabilities
|
|
|
(119
|
)
|
|
|
|
|
|
|
|
|
|
|
|
$
|
5,035
|
|
|
|
|
|
|
|
|
|
|
The overall weighted average amortization period for the above assets as of the date of
acquisition was 6.5 years. To determine the value of the technology and other identifiable intangible assets acquired, we projected such items as revenues, gross margins, operating expenses, future research and development costs, income taxes and
returns on requisite assets. The resulting operating income projections were discounted to a net present value. Pro forma results of operations are not included as they are not materially different from actual results of operations.
Gryphics, Inc.
On April 3, 2007, we
acquired Gryphics, Inc., a private company that designs, manufactures and markets a range of high performance socket products used for final production and evaluation testing of packaged semiconductor integrated circuits. The results of
operations from Gryphics, Inc. have been included in our PPD segment from the date of acquisition.
We acquired all of the outstanding
capital stock of Gryphics for 842,753 shares of our common stock with a fair market value of approximately $12.0 million, based on the per share closing price of our common stock for a reasonable time period before and after the acqusition, and cash
of $13.7 million, subject to a post-closing purchase price adjustment. The number of shares issued was determined based on a contractual formula. Approximately $1.3 million of the $13.7 million is being held in escrow for a one-year period to secure
the indemnification obligation of the shareholders of Gryphics. In addition, we incurred $0.3 million of acquisition costs.
The
acquisition was accounted for by the purchase method of accounting, in accordance with SFAS No. 141, Business Combinations. The fair values of tangible and identifiable intangible assets acquired, including useful lives, were based
upon a valuation as estimated by management.
F-13
The following summarizes the fair values of the assets acquired and liabilities assumed as of the
acquisition date (in thousands):
|
|
|
|
|
|
|
|
|
|
|
|
Useful Life
|
Cash
|
|
$
|
999
|
|
|
|
Accounts receivable
|
|
|
994
|
|
|
|
Inventories
|
|
|
614
|
|
|
|
Prepaid expenses and other
|
|
|
168
|
|
|
|
Property, plant and equipment
|
|
|
598
|
|
|
1 - 7 years
|
Trade name and trademarks
|
|
|
1,136
|
|
|
10 years
|
Non-compete agreements
|
|
|
156
|
|
|
2 years
|
Developed technology
|
|
|
8,242
|
|
|
8 years
|
Customer relationships
|
|
|
3,681
|
|
|
7 years
|
Goodwill
|
|
|
14,404
|
|
|
|
|
|
|
|
|
|
|
|
|
|
30,992
|
|
|
|
Accounts payable
|
|
|
(396
|
)
|
|
|
Deferred tax liabilities
|
|
|
(4,566
|
)
|
|
|
|
|
|
|
|
|
|
|
|
$
|
26,030
|
|
|
|
|
|
|
|
|
|
|
The overall weighted average amortization period for the above assets as of the date of
acquisition was 8.1 years. Goodwill of $14.4 million was recorded as a result of consideration paid in excess of the fair value of the net tangible assets and liabilities acquired, which resulted from expected future revenues and the workforce
acquired. The goodwill has been assigned to the PPD segment. Within one year from the purchase date, we may update the value allocated to the purchased assets and the resulting goodwill balance as a result of information received regarding the
valuation of such assets and liabilities that was not available at the time of purchase. Goodwill will not be amortized, but will be periodically evaluated for potential impairment. None of the goodwill will be deductible for income tax purposes.
Pro forma results of operations, assuming the above acquisition occurred as of January 1, 2006, were as follows (in thousands, except
per share amounts):
|
|
|
|
|
|
|
Year Ended December 31,
|
|
2007
|
|
2006
|
Total revenues
|
|
$
|
91,359
|
|
$
|
92,546
|
Net income
|
|
|
532
|
|
|
3,375
|
Basic earnings per share
|
|
|
0.04
|
|
|
0.27
|
Diluted earnings per share
|
|
|
0.04
|
|
|
0.26
|
Pro forma historical results of operations are not necessarily indicative of actual future results
of operations.
Synatron GmbH
In July 2007, we terminated our distribution agreement and acquired certain assets and operations from our German distributor, Synatron GmbH, for an amount of $1.8 million in cash plus nominal acquisition costs. An additional $0.2 million
was placed in escrow and will be paid for the purchase of Synatron GmbH in July 2008, subject to meeting certain milestones pursuant to the agreement. The contingent purchase price will be recorded when paid. We have established a new subsidiary,
Cascade Microtech, GmbH, which commenced operations as a direct sales and support office in Munich, Germany.
The acquisition of these
assets was accounted for using the purchase method of accounting and the purchase price was allocated as follows:
|
|
|
|
|
|
|
|
|
|
Useful Life
|
Customer relationship
|
|
$
|
928
|
|
5 years
|
Customer backlog
|
|
|
265
|
|
Less than 1 year
|
Goodwill
|
|
|
605
|
|
|
Equipment
|
|
|
15
|
|
1 to 5 years
|
|
|
|
|
|
|
|
|
$
|
1,813
|
|
|
|
|
|
|
|
|
F-14
The fair values of tangible and identifiable intangible assets acquired, including useful lives, were
based upon a valuation as estimated by management. The goodwill of $605,000 was recorded as a result of the consideration paid in excess of the fair value of the net assets acquired, which resulted from expected future revenues. The goodwill
has been assigned to the EPD segment. Goodwill will not be amortized, but will be periodically evaluated for potential impairment. The goodwill is expected to be deductible for income tax purposes.
Pro forma results of operations are not included as they are not materially different from actual results of operations.
NOTE 4. MARKETABLE SECURITIES
Certain information
regarding our marketable securities was as follows (in thousands):
|
|
|
|
|
|
|
|
December 31,
|
|
2007
|
|
2006
|
|
Fair market value:
|
|
|
|
|
|
|
|
Municipal obligations
|
|
$
|
29,357
|
|
$
|
47,196
|
|
Agency discount notes
|
|
|
|
|
|
1,000
|
|
|
|
|
|
|
|
|
|
|
|
$
|
29,357
|
|
$
|
48,196
|
|
|
|
|
|
|
|
|
|
Cost:
|
|
|
|
|
|
|
|
Municipal obligations
|
|
$
|
29,312
|
|
$
|
47,197
|
|
Agency discount notes
|
|
|
|
|
|
1,000
|
|
|
|
|
|
|
|
|
|
|
|
$
|
29,312
|
|
$
|
48,197
|
|
|
|
|
|
|
|
|
|
Fair market value by maturity:
|
|
|
|
|
|
|
|
Within one year
|
|
$
|
24,521
|
|
$
|
38,534
|
|
One to two years
|
|
|
4,836
|
|
|
9,662
|
|
|
|
|
|
|
|
|
|
|
|
$
|
29,357
|
|
$
|
48,196
|
|
|
|
|
|
|
|
|
|
Gross unrealized holding gains (losses):
|
|
|
|
|
|
|
|
Municipal obligations
|
|
$
|
45
|
|
$
|
(1
|
)
|
|
|
|
|
|
|
|
|
|
|
$
|
45
|
|
$
|
(1
|
)
|
|
|
|
|
|
|
|
|
Fair value of investments with unrealized losses
|
|
$
|
769
|
|
$
|
20,695
|
|
|
|
|
|
|
|
|
|
Fair value of investments with unrealized gains
|
|
$
|
19,488
|
|
$
|
10,491
|
|
|
|
|
|
|
|
|
|
Proceeds from the sale of available for sale marketable securities were $42.6 million and $53.7
million in 2007 and 2006, respectively.
At December 31, 2007 and 2006, we determined that unrealized losses on our marketable
securities were temporary based on the duration of the unrealized losses and on our ability to hold the marketable securities until maturity. No investments were in an unrealized loss position for more than one year. Realized gains and losses on
marketable securities were immaterial during 2007, 2006 and 2005.
NOTE 5. INVENTORIES
Inventories consisted of the following (in thousands):
|
|
|
|
|
|
|
December 31,
|
|
2007
|
|
2006
|
Raw materials
|
|
$
|
9,764
|
|
$
|
6,205
|
Work-in-process
|
|
|
2,471
|
|
|
2,947
|
Finished goods
|
|
|
6,373
|
|
|
5,942
|
|
|
|
|
|
|
|
|
|
$
|
18,608
|
|
$
|
15,094
|
|
|
|
|
|
|
|
F-15
NOTE 6. FIXED ASSETS
Fixed assets consisted of the following (in thousands):
|
|
|
|
|
|
|
|
|
December 31,
|
|
2007
|
|
|
2006
|
|
Equipment
|
|
$
|
19,102
|
|
|
$
|
14,751
|
|
Leasehold improvements
|
|
|
6,154
|
|
|
|
3,027
|
|
Construction in progress
|
|
|
3,599
|
|
|
|
2,425
|
|
|
|
|
|
|
|
|
|
|
|
|
|
28,855
|
|
|
|
20,203
|
|
Less accumulated depreciation
|
|
|
(14,280
|
)
|
|
|
(13,385
|
)
|
|
|
|
|
|
|
|
|
|
|
|
$
|
14,575
|
|
|
$
|
6,818
|
|
|
|
|
|
|
|
|
|
|
Depreciation expense was $2.3 million, $1.6 million and $1.5 million, respectively, in 2007, 2006
and 2005.
NOTE 7. GOODWILL, PURCHASED INTANGIBLES AND OTHER INTANGIBLE ASSETS
The change in goodwill was as follows (in thousands):
|
|
|
|
|
|
|
Year Ended December 31,
|
|
2007
|
|
2006
|
Balance, beginning of period
|
|
$
|
1,295
|
|
$
|
|
Acquisition of certain assets of the eVue product line
|
|
|
|
|
|
1,295
|
Additional purchase price for certain assets of the eVue product line
|
|
|
1,000
|
|
|
|
Acquisition of Gryphics, Inc.
|
|
|
14,404
|
|
|
|
Acquisition of certain assets of Synatron GmbH
|
|
|
605
|
|
|
|
Adjustments to goodwill
|
|
|
6
|
|
|
|
|
|
|
|
|
|
|
Balance, end of period
|
|
$
|
17,310
|
|
$
|
1,295
|
|
|
|
|
|
|
|
Adjustments to goodwill include additional acquisition costs related to our acquisition of certain
assets of the eVue product line.
Included in other long-term assets on our balance sheet were internally developed patents as follows: (in
thousands):
|
|
|
|
|
|
|
|
|
December 31,
|
|
2007
|
|
|
2006
|
|
Patents
|
|
$
|
5,523
|
|
|
$
|
4,641
|
|
Accumulated amortization
|
|
|
(3,253
|
)
|
|
|
(2,859
|
)
|
|
|
|
|
|
|
|
|
|
|
|
$
|
2,270
|
|
|
$
|
1,782
|
|
|
|
|
|
|
|
|
|
|
F-16
Purchased intangible assets, net included the following:
|
|
|
|
|
|
|
|
|
December 31,
|
|
2007
|
|
|
2006
|
|
Developed technology
|
|
$
|
8,242
|
|
|
$
|
|
|
Accumulated amortization
|
|
|
(773
|
)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
7,469
|
|
|
|
|
|
Purchased patents
|
|
|
961
|
|
|
|
961
|
|
Accumulated amortization
|
|
|
(150
|
)
|
|
|
(30
|
)
|
|
|
|
|
|
|
|
|
|
|
|
|
811
|
|
|
|
931
|
|
Developed software technology
|
|
|
165
|
|
|
|
165
|
|
Accumulated amortization
|
|
|
(69
|
)
|
|
|
(14
|
)
|
|
|
|
|
|
|
|
|
|
|
|
|
96
|
|
|
|
151
|
|
Customer relationships
|
|
|
6,146
|
|
|
|
1,537
|
|
Accumulated amortization
|
|
|
(762
|
)
|
|
|
(61
|
)
|
|
|
|
|
|
|
|
|
|
|
|
|
5,384
|
|
|
|
1,476
|
|
Trade names and trademarks
|
|
|
1,136
|
|
|
|
|
|
Accumulated amortization
|
|
|
(85
|
)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1,051
|
|
|
|
|
|
Non-compete agreements
|
|
|
156
|
|
|
|
|
|
Accumulated amortization
|
|
|
(58
|
)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
98
|
|
|
|
|
|
Customer backlog
|
|
|
342
|
|
|
|
77
|
|
Accumulated amortization
|
|
|
(209
|
)
|
|
|
(25
|
)
|
|
|
|
|
|
|
|
|
|
|
|
|
133
|
|
|
|
52
|
|
|
|
|
|
|
|
|
|
|
Total purchased intangible assets, net
|
|
$
|
15,042
|
|
|
$
|
2,610
|
|
|
|
|
|
|
|
|
|
|
Amortization expense of internally developed patents and purchased intangible assets totaled
$2,370,000, $502,000 and $311,000, respectively, in 2007, 2006 and 2005. Of the amortization expense, $394,000, $372,000 and $311,000, respectively, was for internally developed patents and was included as a component of selling, general and
administrative expense.
Amortization of the identifiable intangible assets is as follows over the next five years and thereafter (in
thousands):
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Internally
Developed
Patents
|
|
Developed
Technology
|
|
Purchased
Patents
|
|
Developed
Software
Technology
|
|
Customer
Relationships
|
2008
|
|
$
|
635
|
|
$
|
1,030
|
|
$
|
120
|
|
$
|
55
|
|
$
|
931
|
2009
|
|
|
515
|
|
|
1,030
|
|
|
120
|
|
|
41
|
|
|
931
|
2010
|
|
|
434
|
|
|
1,030
|
|
|
120
|
|
|
|
|
|
931
|
2011
|
|
|
367
|
|
|
1,030
|
|
|
120
|
|
|
|
|
|
931
|
2012
|
|
|
262
|
|
|
1,030
|
|
|
120
|
|
|
|
|
|
838
|
Thereafter
|
|
|
57
|
|
|
2,319
|
|
|
211
|
|
|
|
|
|
822
|
|
|
|
|
|
|
|
|
|
|
|
|
Trade names
and
trademarks
|
|
Non-compete
agreements
|
|
Customer
Backlog
|
2008
|
|
$
|
114
|
|
$
|
78
|
|
$
|
133
|
2009
|
|
|
114
|
|
|
20
|
|
|
|
2010
|
|
|
114
|
|
|
|
|
|
|
2011
|
|
|
114
|
|
|
|
|
|
|
2012
|
|
|
114
|
|
|
|
|
|
|
Thereafter
|
|
|
481
|
|
|
|
|
|
|
F-17
NOTE 8. ACCRUED LIABILITIES
Accrued liabilities consisted of the following (in thousands):
|
|
|
|
|
|
|
December 31,
|
|
2007
|
|
2006
|
Accrued compensation and benefits
|
|
$
|
2,372
|
|
$
|
2,261
|
Income taxes payable
|
|
|
1,533
|
|
|
1,072
|
Accrued warranty
|
|
|
501
|
|
|
536
|
Accrued materials returns
|
|
|
332
|
|
|
473
|
Other
|
|
|
851
|
|
|
684
|
|
|
|
|
|
|
|
|
|
$
|
5,589
|
|
$
|
5,026
|
|
|
|
|
|
|
|
NOTE 9. INCOME TAXES
Domestic and foreign pre-tax income was as follows (in thousands):
|
|
|
|
|
|
|
|
|
|
Year Ended December 31,
|
|
2007
|
|
2006
|
|
2005
|
Domestic
|
|
$
|
1,033
|
|
$
|
3,915
|
|
$
|
9,215
|
Foreign
|
|
|
483
|
|
|
1,190
|
|
|
277
|
|
|
|
|
|
|
|
|
|
|
|
|
$
|
1,516
|
|
$
|
5,105
|
|
$
|
9,492
|
|
|
|
|
|
|
|
|
|
|
The provision (benefit) for income taxes consisted of the following (in thousands):
|
|
|
|
|
|
|
|
|
|
|
|
|
Year Ended December 31,
|
|
2007
|
|
|
2006
|
|
|
2005
|
|
Current:
|
|
|
|
|
|
|
|
|
|
|
|
|
Federal
|
|
$
|
1,786
|
|
|
$
|
1,222
|
|
|
$
|
1,443
|
|
State
|
|
|
86
|
|
|
|
68
|
|
|
|
130
|
|
Foreign
|
|
|
307
|
|
|
|
407
|
|
|
|
5
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Total current
|
|
|
2,179
|
|
|
|
1,697
|
|
|
|
1,578
|
|
Deferred:
|
|
|
|
|
|
|
|
|
|
|
|
|
Federal
|
|
|
(1,365
|
)
|
|
|
(292
|
)
|
|
|
(373
|
)
|
State
|
|
|
(208
|
)
|
|
|
48
|
|
|
|
(23
|
)
|
Foreign
|
|
|
(20
|
)
|
|
|
42
|
|
|
|
(9
|
)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Total deferred
|
|
|
(1,593
|
)
|
|
|
(202
|
)
|
|
|
(405
|
)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Provision for income taxes
|
|
$
|
586
|
|
|
$
|
1,495
|
|
|
$
|
1,173
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The provision (benefit) for income taxes varies from the amounts computed by applying the Federal
statutory rate of 34% to income before income taxes as follows (in thousands):
|
|
|
|
|
|
|
|
|
|
|
|
|
Year Ended December 31,
|
|
2007
|
|
|
2006
|
|
|
2005
|
|
Federal income tax computed at statutory rates
|
|
$
|
516
|
|
|
$
|
1,736
|
|
|
$
|
3,228
|
|
Extraterritorial income exclusion tax benefit
|
|
|
|
|
|
|
(139
|
)
|
|
|
(286
|
)
|
Difference in foreign tax rate
|
|
|
(26
|
)
|
|
|
59
|
|
|
|
|
|
State income taxes, net of federal benefit
|
|
|
42
|
|
|
|
64
|
|
|
|
209
|
|
Stock-based compensation
|
|
|
429
|
|
|
|
508
|
|
|
|
(30
|
)
|
Tax credits (R&D and foreign tax credit)
|
|
|
(679
|
)
|
|
|
(508
|
)
|
|
|
(1,289
|
)
|
Changes in valuation allowance
|
|
|
160
|
|
|
|
191
|
|
|
|
(107
|
)
|
Tax exempt interest income
|
|
|
(443
|
)
|
|
|
(538
|
)
|
|
|
(338
|
)
|
Unrecognized tax benefits
|
|
|
534
|
|
|
|
243
|
|
|
|
|
|
State net operating loss utilized
|
|
|
|
|
|
|
|
|
|
|
(38
|
)
|
Other
|
|
|
53
|
|
|
|
(121
|
)
|
|
|
(176
|
)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Provision for income taxes
|
|
$
|
586
|
|
|
$
|
1,495
|
|
|
$
|
1,173
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
F-18
Significant components of deferred income tax assets and liabilities were as follows (in thousands):
|
|
|
|
|
|
|
|
|
December 31,
|
|
2007
|
|
|
2006
|
|
Current deferred tax assets:
|
|
|
|
|
|
|
|
|
Reserves and allowances
|
|
$
|
428
|
|
|
$
|
465
|
|
Inventory reserves
|
|
|
784
|
|
|
|
686
|
|
Accrued vacation
|
|
|
305
|
|
|
|
302
|
|
Deferred intercompany profit
|
|
|
813
|
|
|
|
583
|
|
Customer deposits
|
|
|
423
|
|
|
|
249
|
|
Other current deferred tax assets
|
|
|
78
|
|
|
|
86
|
|
|
|
|
|
|
|
|
|
|
Gross current deferred tax assets
|
|
|
2,831
|
|
|
|
2,371
|
|
Valuation allowance
|
|
|
(87
|
)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Net current deferred tax assets
|
|
|
2,744
|
|
|
|
2,371
|
|
|
|
|
|
|
|
|
|
|
Current deferred tax liabilities:
|
|
|
|
|
|
|
|
|
Loss on hedging activities
|
|
|
(15
|
)
|
|
|
(329
|
)
|
|
|
|
|
|
|
|
|
|
Current deferred tax assets, net
|
|
|
2,729
|
|
|
|
2,042
|
|
Non-current deferred tax assets:
|
|
|
|
|
|
|
|
|
Retirement allowance
|
|
|
194
|
|
|
|
162
|
|
State net operating loss carryforwards
|
|
|
150
|
|
|
|
|
|
Federal and state research tax credits
|
|
|
2,583
|
|
|
|
2,511
|
|
Stock-based compensation
|
|
|
281
|
|
|
|
97
|
|
Other non-current deferred tax assets
|
|
|
706
|
|
|
|
589
|
|
|
|
|
|
|
|
|
|
|
Gross non-current deferred tax assets
|
|
|
3,914
|
|
|
|
3,359
|
|
Valuation allowance
|
|
|
(2,060
|
)
|
|
|
(1,972
|
)
|
|
|
|
|
|
|
|
|
|
Net non-current deferred tax assets
|
|
|
1,854
|
|
|
|
1,387
|
|
Non-current deferred tax liabilities:
|
|
|
|
|
|
|
|
|
Purchased intangibles
|
|
|
(4,073
|
)
|
|
|
|
|
Patents
|
|
|
(873
|
)
|
|
|
(705
|
)
|
Other non-current deferred tax liabilities
|
|
|
(22
|
)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Total non-current deferred tax liabilities
|
|
|
(4,968
|
)
|
|
|
(705
|
)
|
|
|
|
|
|
|
|
|
|
Non-current tax assets (liabilities), net
|
|
|
(3,114
|
)
|
|
|
682
|
|
|
|
|
|
|
|
|
|
|
Net total deferred tax assets (liabilities)
|
|
$
|
(385
|
)
|
|
$
|
2,724
|
|
|
|
|
|
|
|
|
|
|
Deferred tax assets arise from the tax benefit of amounts expensed for financial reporting
purposes but not yet realized for tax purposes and from unutilized tax credits and net operating loss carry forwards. We evaluate our deferred tax assets on a regular basis to determine if a valuation allowance is required. To the extent it is
determined that it is more likely than not that we will not realize the benefit of our deferred tax assets, we record a valuation allowance against deferred tax assets. In 2007, we increased the valuation allowance against State of Oregon research
credits by $25,000 and established a valuation allowance against a foreign net operating loss carryforward of $150,000. In 2006, we increased the valuation allowance against State of Oregon research credits by $206,000 as we believe that this
portion of the tax credits are more likely than not to not be utilized in the future. As of December 31, 2007, we believe it is more likely than not that the benefit of the remaining federal credits will be realized in future periods based on
anticipated future profits.
In 2005, we released $28,000 of valuation allowance related to the future realization of foreign tax credits
and foreign net operating losses.
The net increase (decrease) in the total valuation allowance was $175,000, $206,000 and $(28,000),
respectively, in 2007, 2006 and 2005. The valuation allowance as of December 31, 2007 and 2006 was $2.1 million and $2.0 million, respectively. As of December 31, 2007, the portion of valuation allowance for deferred tax assets for which
subsequently recognized tax benefits will be applied directly to equity is approximately $109,000.
F-19
In 2007, 2006 and 2005, income tax benefits attributable to employee stock option transactions of
$142,000, $945,000 and $855,000, respectively, were allocated to shareholders equity.
We had federal and state research and
experimentation credit carryforwards of approximately $2.6 million at December 31, 2007 to offset against future taxable income. These carryforwards expire beginning 2008 through 2027.
A reconciliation of unrecognized tax benefits for 2007 was as follows (in thousands):
|
|
|
|
|
Balance, January 1, 2007
|
|
$
|
645
|
|
Increases due to tax positions taken during a prior year
|
|
|
614
|
|
Decreases due to tax positions taken during a prior year
|
|
|
(134
|
)
|
|
|
|
|
|
Balance, December 31, 2007
|
|
$
|
1,125
|
|
|
|
|
|
|
Interest and penalties recognized during the period
|
|
$
|
162
|
|
|
|
|
|
|
Of the total unrecognized tax benefits at December 31, 2007, $0.9 million would have an
impact on the effective tax rate if recognized. Interest and penalties accrued on the unrecognized tax benefits totaled $0.2 million at December 31, 2007. Although we cannot be certain of the final outcome of any ongoing tax examinations, we
believe it is reasonably possible that the total amount of unrecognized benefits related primarily to research and experimentation credits could decrease in the range of $0.7 million to $0.9 million within the next 12 months.
The tax years which remained open to examination in our major taxing jurisdictions as of December 31, 2007 were as follows:
|
|
|
Jurisdiction
|
|
Open Tax Years
|
U.S.
|
|
2004 - 2007
|
Japan
|
|
2001 - 2007
|
United Kingdom
|
|
2005 - 2007
|
Taiwan
|
|
2006 - 2007
|
China
|
|
2006 - 2007
|
We did not provide for U.S. income taxes on the remaining undistributed earnings of foreign
subsidiaries because they were considered permanently invested outside of the U.S. Upon repatriation, some of these earnings would generate foreign tax credits, which may reduce the U.S. tax liability associated with any future foreign dividend. At
December 31, 2007, the cumulative amount of earnings upon which U.S. income taxes have not been provided is approximately $3.8 million.
A provision of the Internal Revenue Code requires the utilization of net operating losses and research and experimentation credits be limited when we a change in ownership of more than 50% occurs. We believe that such a change occurred with
the issuance of common stock in our initial public offering (IPO) in December 2004. Accordingly, the utilization of the net operating loss and credit carryforwards generated from periods prior to December 2004 may be limited in the
timing of their utilization.
F-20
NOTE 10. OTHER, NET
Other, net consisted of the following (in thousands):
|
|
|
|
|
|
|
|
|
|
|
|
|
Year ended December 31,
|
|
2007
|
|
|
2006
|
|
|
2005
|
|
Remeasurement related foreign currency gains (losses)
|
|
$
|
(254
|
)
|
|
$
|
97
|
|
|
$
|
(34
|
)
|
Gains related to foreign currency hedges
|
|
|
238
|
|
|
|
253
|
|
|
|
151
|
|
Settlement income from a service provider
|
|
|
|
|
|
|
|
|
|
|
700
|
|
Other
|
|
|
(103
|
)
|
|
|
(3
|
)
|
|
|
131
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
$
|
(119
|
)
|
|
$
|
347
|
|
|
$
|
948
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTE 11. STOCK-BASED COMPENSATION AND STOCK-BASED PLANS
Certain information regarding our stock-based compensation was as follows (in thousands, except per share amounts):
|
|
|
|
|
|
|
|
|
|
Year Ended December 31,
|
|
2007
|
|
2006
|
|
2005
|
Weighted average grant-date fair value of share options granted
|
|
$
|
1,924
|
|
$
|
3,026
|
|
$
|
2,468
|
Total intrinsic value of share options exercised
|
|
|
1,575
|
|
|
2,397
|
|
|
3,990
|
Fair value of restricted shares vested
|
|
|
59
|
|
|
|
|
|
|
Stock-based compensation recognized in results of operations
|
|
|
2,346
|
|
|
1,882
|
|
|
122
|
Cash received from options exercised and shares purchased under all share-based arrangements
|
|
|
1,989
|
|
|
2,176
|
|
|
2,179
|
Tax benefit realized related to stock options exercised
|
|
|
142
|
|
|
945
|
|
|
855
|
No stock-based compensation was capitalized as a part of an asset during the years ended
December 31, 2007, 2006 or 2005.
Our stock-based compensation was included in our statements of operations as follows (in thousands):
|
|
|
|
|
|
|
|
|
|
Year Ended December 31,
|
|
2007
|
|
2006
|
|
2005
|
Cost of sales
|
|
$
|
432
|
|
$
|
443
|
|
$
|
39
|
Research and development
|
|
|
361
|
|
|
305
|
|
|
17
|
Selling, general and administrative
|
|
|
1,553
|
|
|
1,134
|
|
|
66
|
|
|
|
|
|
|
|
|
|
|
|
|
$
|
2,346
|
|
$
|
1,882
|
|
$
|
122
|
|
|
|
|
|
|
|
|
|
|
To determine the fair value of stock-based awards granted, we used the Black-Scholes option
pricing model and the following weighted average assumptions:
|
|
|
|
|
|
|
|
|
|
Year Ended December 31,
|
|
2007
|
|
|
2006
|
|
|
2005
|
|
Stock Option Plan
|
|
|
|
|
|
|
|
|
|
Risk-free interest rate
|
|
4.5
|
%
|
|
4.53% - 5.07
|
%
|
|
3.77% - 4.39
|
%
|
Expected dividend yield
|
|
0.0
|
%
|
|
0.0
|
%
|
|
0.0
|
%
|
Expected term
|
|
6.5 years
|
|
|
4 years - 6.5 years
|
|
|
6 years
|
|
Expected volatility
|
|
48.3
|
%
|
|
56.2% - 61.4
|
%
|
|
67.4% - 68.9
|
%
|
Employee Stock Purchase Plan
|
|
|
|
|
|
|
|
|
|
Risk-free interest rate
|
|
4.31% - 5.08
|
%
|
|
4.73% - 5.08
|
%
|
|
4.73% - 4.79
|
%
|
Expected dividend yield
|
|
0.0
|
%
|
|
0.0
|
%
|
|
0.0
|
%
|
Expected term
|
|
6 months - 2 years
|
|
|
6 months -2 years
|
|
|
6 months - 2 years
|
|
Expected volatility
|
|
19.2% - 35.8
|
%
|
|
24.8% - 45.7
|
%
|
|
34.6% - 45.7
|
%
|
The risk-free rate used is based on the U.S. Treasury yield over the expected term of the options
granted. Our option pricing model utilizes the simplified method accepted under Staff Accounting Bulletin No. 107 to estimate the expected term. The expected volatility for options granted pursuant to our stock incentive plans is calculated
based on a weighted average actual volatility of a peer group of companies over the prior 6.5 year period. The expected volatility for our employee stock purchase plan is calculated based on our historical volatility and consideration of peer group
data. We have not paid dividends in the past and we do not expect to pay dividends in the future and, therefore, the expected dividend yield is 0%.
F-21
We amortize stock-based compensation on a straight-line basis over the vesting period of the individual
awards, which is the requisite service period, with estimated forfeitures considered. Shares to be issued upon the exercise of stock options will come from newly issued shares.
Stock Incentive Plans
Our stock incentive plans include our 1993 Stock Incentive Plan (the
1993 Plan) and our 2000 Stock Incentive Plan (the 2000 Plan) (together, the Plans) and provide for the granting of incentive stock options, nonqualified stock options and restricted stock units. Incentive stock
options must be granted at an exercise price not less than 100% of the fair market value per share at the grant date. Nonqualified stock options granted or shares sold under the Plans cannot be granted or sold at a price less than 85% of the fair
market value per share at the date of grant or sale. The contractual term of options granted under the Plans is 10 years, and the right to exercise options granted generally vests as to 20% at the end of the first year and then as to 1.67% per
month thereafter with full vesting occurring on the fifth anniversary. The 1993 Plan expired during 2003 and any remaining unissued options were canceled. The 2000 Plan expires October 15, 2010. Options currently outstanding under the 1993 Plan
will not be available for reissuance upon cancellation. We have authorized a total of 2.4 million shares of common stock for issuance under the 2000 Plan.
At December 31, 2007, 678,647 shares were available for future grants, and we had 2,155,473 shares of our common stock reserved for future issuance under the Plans.
Stock option activity for the year ended December 31, 2007 was as follows:
|
|
|
|
|
|
|
|
|
Options
Outstanding
|
|
|
Weighted
Average
Exercise Price
|
Outstanding at December 31, 2006
|
|
1,728,116
|
|
|
$
|
9.95
|
Granted
|
|
11,000
|
|
|
|
14.40
|
Exercised
|
|
(223,121
|
)
|
|
|
5.11
|
Forfeited
|
|
(199,626
|
)
|
|
|
12.37
|
|
|
|
|
|
|
|
Outstanding at December 31, 2007
|
|
1,316,369
|
|
|
|
10.44
|
|
|
|
|
|
|
|
Certain information regarding options outstanding as of December 31, 2007 was as follows:
|
|
|
|
|
|
|
|
|
Options
Outstanding
|
|
Options
Exercisable
|
Number
|
|
|
1,316,369
|
|
|
932,742
|
Weighted average exercise price
|
|
$
|
10.44
|
|
$
|
9.53
|
Aggregate intrinsic value
|
|
$
|
2.0 million
|
|
$
|
1.9 million
|
Weighted average remaining contractual term
|
|
|
5.8 years
|
|
|
4.9 years
|
The aggregate intrinsic value in the table above is based on our closing stock price of $10.19 on
December 31, 2007, which would have been received by the optionees had all of the options with exercise prices less than $10.19 been exercised on that date.
Restricted stock unit activity during 2007 was as follows:
|
|
|
|
|
|
|
|
|
Restricted
Stock
Units
|
|
|
Weighted
Average
Grant Date
Per Share
Fair Value
|
Outstanding at December 31, 2006
|
|
20,000
|
|
|
$
|
13.38
|
Granted
|
|
168,875
|
|
|
|
10.89
|
Vested
|
|
(6,668
|
)
|
|
|
8.89
|
Forfeited
|
|
(1,200
|
)
|
|
|
14.40
|
|
|
|
|
|
|
|
Outstanding at December 31, 2007
|
|
181,007
|
|
|
|
11.22
|
|
|
|
|
|
|
|
F-22
As of December 31, 2007, total unrecognized stock-based compensation related to outstanding, but
unvested options and restricted stock units was $6.0 million, which will be recognized over the weighted average remaining vesting period of 1.85 years.
Employee Stock Purchase Plan
In February 2004, our board of directors approved the 2004 Employee Share Purchase Plan
(the 2004 ESPP) and the reservation of 400,000 shares of our common stock thereunder. The 2004 ESPP consists of two-year offering periods with four consecutive, overlapping six-month purchase periods commencing on the first trading day
on or after February 1 and August 1 each year (the Enrollment Date). Any eligible employee may participate in the 2004 ESPP by completing a subscription agreement which allows participants to purchase up to 5,000 shares per
six-month purchase period, at a purchase price of 85% of the fair market value of a share of common stock on the Enrollment Date or on the exercise date, whichever is lower. The exercise date is the last trading day of each offering period. If the
purchase price is lower on the exercise date than on the Enrollment Date, the two-year offering period will terminate and a new two-year offering period will begin. Participating employees are automatically enrolled in the new offering period.
During the year ended December 31, 2007, we issued 95,645 shares pursuant to the 2004 ESPP at a weighted average price of $8.86 per share, which represented a weighted average discount of $3.45 per share from the fair market value on the dates
of purchase, and 182,245 shares remained available for purchase as of December 31, 2007.
NOTE 12. RELATED PARTY TRANSACTIONS
Agilent Technologies
Prior to our IPO, Agilent
Technologies held all of the outstanding shares of Series A and 87,500 shares of the Series B. Upon our IPO, the Series A and Series B were converted into a total of 1,424,819 shares of our common stock. As of the end of January 2006,
Agilent did not hold any shares of our outstanding common stock. Certain other financial information related to Agilent was as follows:
|
|
|
|
Year Ended December 31,
|
|
2005
|
Sales to Agilent
|
|
$
|
2.5 million
|
Purchases from Agilent
|
|
$
|
548,000
|
Royalties paid to Agilent for non-exclusive license to use certain patented technology relating to electrical measurement
apparatuses
|
|
$
|
11,000
|
FEI Company
During 2007 and 2006, we purchased certain equipment and services for $31,000 and $318,000, respectively, from FEI Company (FEI). In addition, FEI purchased certain equipment from us for a total of $3,000
and $122,000, respectively, during 2007 and 2006. At December 31, 2007 and 2006, we owed FEI $0 and $4,000, respectively, and we had a receivable from FEI of $3,000 and $2,000, respectively. One of the members of our Board of Directors,
Mr. Raymond A. Link, is the Executive Vice President and Chief Financial Officer of FEI.
Raytheon, Inc.
During 2007 and 2006, we did not purchase any equipment or services from Raytheon, Inc. However, Raytheon purchased certain equipment from us for a total
of $232,000 and $408,000, respectively, during 2007 and 2006. At December 31, 2007 and 2006, we had no outstanding payments owed to Raytheon, Inc. and we had a receivable from Raytheon, Inc. of $22,000 and $87,000, respectively. One of the
members of our Board of Directors, Mr. William Spivey, is a member of the Board of Directors of Raytheon, Inc.
NOTE 13. EMPLOYEE BENEFIT PLAN
We sponsor a 401(k) savings plan which allows eligible employees to contribute a certain percentage of their salary. We match 40% of
eligible employees contributions, up to a maximum of 2% of the employees earnings. Our matching contribution for the savings plan was $296,000, $271,000 and $230,000, respectively, in 2007, 2006 and 2005.
F-23
NOTE 14. COMMITMENTS AND CONTINGENCIES
Leases and Subleases
We lease office and manufacturing space under operating leases that
expire at various dates through 2015. In addition to lease expense, we pay real property taxes, insurance and repair and maintenance expenses for our corporate office and manufacturing facility. We recognize rent expense related to our operating
leases based on a straight-line basis over the life of the lease. We also lease certain equipment with a cost basis at December 31, 2007 of $67,000 and accumulated depreciation at December 31, 2007 of $10,000 under capital leases.
Future minimum lease payments under non-cancelable operating leases and capital leases with initial or remaining terms in excess of one
year are as follows (in thousands):
|
|
|
|
|
|
|
|
Year Ending December 31,
|
|
Operating
|
|
Capital
|
|
2008
|
|
$
|
2,466
|
|
$
|
15
|
|
2009
|
|
|
2,230
|
|
|
15
|
|
2010
|
|
|
2,197
|
|
|
16
|
|
2011
|
|
|
2,091
|
|
|
15
|
|
2012
|
|
|
2,151
|
|
|
7
|
|
Thereafter
|
|
|
5,818
|
|
|
|
|
|
|
|
|
|
|
|
|
Total minimum lease payments
|
|
$
|
16,953
|
|
|
68
|
|
|
|
|
|
|
|
|
|
Less amounts representing interest
|
|
|
|
|
|
(4
|
)
|
|
|
|
|
|
|
|
|
Present value of future minimum lease payments
|
|
|
|
|
$
|
64
|
|
|
|
|
|
|
|
|
|
Lease expense was $2.8 million, $2.6 million and $2.5 million, respectively, in 2007, 2006 and
2005. Depreciation expense related to capital leases was $10,000, $8,000 and $13,000, respectively, in 2007, 2006 and 2005.
Legal Proceedings
We are involved in various claims and legal actions arising in the ordinary course of business. In the opinion of management, the
ultimate disposition of these matters will not have a material adverse effect on our financial position, results of operations or liquidity.
F-24
NOTE 15. SEGMENT REPORTING AND ENTERPRISE-WIDE DISCLOSURES
The segment data below is presented in the same manner that management organizes the segments for assessing certain performance trends. Our Chief Operating Decision Maker monitors the revenue
streams and gross profit of EPD and PPD. Prior period information has been reclassified to match the current period presentation (dollars in thousands):
|
|
|
|
|
|
|
|
|
|
|
|
|
Year Ended December 31, 2007
|
|
EPD
|
|
|
PPD
|
|
|
Total
|
|
Revenue
|
|
$
|
68,724
|
|
|
$
|
21,198
|
|
|
$
|
89,922
|
|
Gross Profit
|
|
$
|
30,630
|
|
|
$
|
10,491
|
|
|
$
|
41,121
|
|
Gross Margin
|
|
|
44.6
|
%
|
|
|
49.5
|
%
|
|
|
45.7
|
%
|
|
|
|
|
Year Ended December 31, 2006
|
|
|
|
|
|
|
|
|
|
Revenue
|
|
$
|
67,969
|
|
|
$
|
16,883
|
|
|
$
|
84,852
|
|
Gross Profit
|
|
$
|
30,522
|
|
|
$
|
6,520
|
|
|
$
|
37,042
|
|
Gross Margin
|
|
|
44.9
|
%
|
|
|
38.6
|
%
|
|
|
43.7
|
%
|
|
|
|
|
Year Ended December 31, 2005
|
|
|
|
|
|
|
|
|
|
Revenue
|
|
$
|
63,566
|
|
|
$
|
10,071
|
|
|
$
|
73,637
|
|
Gross Profit
|
|
$
|
30,655
|
|
|
$
|
3,592
|
|
|
$
|
34,247
|
|
Gross Margin
|
|
|
48.2
|
%
|
|
|
35.7
|
%
|
|
|
46.5
|
%
|
No customer accounted for 10% or more of our total revenue in 2007, 2006 or 2005.
Our revenues by geographic area were as follows (in thousands):
|
|
|
|
|
|
|
|
|
|
Year Ended December 31,
|
|
2007
|
|
2006
|
|
2005
|
United States
|
|
$
|
35,198
|
|
$
|
32,220
|
|
$
|
23,877
|
Japan
|
|
|
11,349
|
|
|
14,239
|
|
|
15,085
|
Taiwan
|
|
|
8,093
|
|
|
6,856
|
|
|
7,612
|
Other
|
|
|
35,282
|
|
|
31,537
|
|
|
27,063
|
|
|
|
|
|
|
|
|
|
|
|
|
$
|
89,922
|
|
$
|
84,852
|
|
$
|
73,637
|
|
|
|
|
|
|
|
|
|
|
Long-lived assets, exclusive of long-term investments and deferred income taxes, by geographic
area were as follows (in thousands):
|
|
|
|
|
|
|
December 31,
|
|
2007
|
|
2006
|
United States
|
|
$
|
47,469
|
|
$
|
12,392
|
Japan
|
|
|
368
|
|
|
224
|
Germany
|
|
|
1,600
|
|
|
|
Other
|
|
|
181
|
|
|
199
|
|
|
|
|
|
|
|
|
|
$
|
49,618
|
|
$
|
12,815
|
|
|
|
|
|
|
|
NOTE 16. SUBSEQUENT EVENT
Internal Revenue Service Audit
We are currently undergoing an Internal Revenue Service
(IRS) audit and, in February 2008, we received notification that the audit will disallow certain research and development credits on our returns for which we have not provided a contingency provision. We shall determine whether we need
to provide any additional tax contingencies in the first quarter of 2008. In addition, we may enter into a legal dispute with the IRS over this matter and the costs could be significant.
F-25