Highlights:
- Larkin Zone extended over 1km with new infill and step out
results:
-
- BL19-03AR: 6.2 g/t over 10.3 metres, including 9.6g/t over 6.2
metres
- BL19-04AR: 2.4 g/t over 10.6 metres
- BL19-09AR: 9.4 g/t over 11.0 metres
- BL19-14AR: 5.9 g/t over 3.2 metres
- BL19-23AR: 15.2 g/t over 1.6 metres
- EL-EA2-011AR: 20.5 g/t over 3.5 metres, including 87.9 g/t over
0.4 metres
- Western Flanks South / North extended and infilled with new
drilling results:
-
- WW370-01AE: 5.1 g/t over 10.7 metres
- WW395-04AR: 6.0 g/t over 5.6 metres
- AW18LV-14AR: 2.1 g/t over 8.0 metres and 13.5 g/t over 2.0
metres
- Major Western Flanks and A Zone extensional target
supported with new surface drilling results:
-
- AZ_m182RC_4AE: 4.7 g/t over 2 metres, including 9.3 g/t over
1.0 metres. Drilling located 300 metres up plunge from margin of
existing A Zone underground resource.
- Geological observation of surface core and RC drilling has
identified a broad shear structure approximately 40 metres wide
located 700 metres north along strike of the existing Western
Flanks resource.
- 30C Trough nickel infill drilling while 50C Trough assays
are pending:
-
- B30-19-007NR: 2.4% Ni over 3.6 metres
1.
|
Interval lengths
are estimated true widths with the exception of Western Flanks and
A Zone surface gold drilling where true widths cannot be determined
with available information,
|
2.
|
Tables showing
complete results and drill holes can be found at the end of this
news release.
|
TORONTO, Sept. 8, 2021 /CNW/ - Karora Resources Inc. (TSX:
KRR) ("Karora" or the "Corporation") is pleased to announce
additional drilling from the Larkin Zone discovery at its Beta Hunt
Mine has extended the strike length of the new zone to over 1,000
metres just one year after initial discovery. The rapid extension
of the zone is a direct result of the significant infrastructure
already in place allowing Karora to drill from optimal locations
without requiring extensive additional underground development. The
initial phase of drilling at Larkin is now complete and the maiden
resource for the Larkin Zone will be included in Karora's 2021
consolidated mineral resource update expected in early 2022.
Paul Huet, Chairman and CEO of
Karora said, "As expected, continued strong recent drill results
from the Larkin gold discovery have significantly extended the
interpreted strike length to over 1,000 metres and to a depth of up
to 150 metres below the ultramafic / basalt contact zone. This
rapid strike and depth expansion follows the drilling success
reported earlier this year which previously extended Larkin over a
strike of 650 metres and up to 120 metres down dip (see Karora news
release dated May 12, 2021).
Importantly, the Larkin zone remains open for further extension
both along strike and at depth. Newly reported results from Larkin
included intercepts of 9.4 g/t over 11.0 metres (hole BL19-09AR),
20.5 g/t over 3.5 metres (hole EL-EA2-011AR) and 15.2 g/t over 1.6
metres (hole BL19-23AR).
At Western Flanks North and South, infill drilling aimed at
upgrading and supporting the Western Flanks Mineral Resource model
returned solid intercepts, including 5.1 g/t over 10.7 metres (hole
WW370-01AE) and 6.0 g/t over 5.6 metres (hole WW395-04AR).
In addition to the encouraging Larkin and Western Flanks North
and South infill results, I am particularly pleased with the
initial extensional drill results from surface in the A Zone North
zone, which has confirmed the presence of gold mineralization 300
metres from the margin of the existing resource with a result of
4.7 g/t over 2.0 metres, including 9.3 g/t over 1.0 metres.
Planning for additional drilling to test the continuity of this
mineralization is underway. As highlighted in our growth plan, our
planned second decline at Beta Hunt will provide the potential to
access this gold mineralization very early in the development with
the opportunity to provide gold revenue at an early stage of the
mine expansion program.
On the nickel front, drilling is underway at the 50C Nickel
Trough discovery where we previously reported strong initial
results, including 11.6% Ni over 4.6 metres, including 18.4% Ni
over 2.2 metres (Karora news release dated April 6, 2021). Assay results are pending on the
new drilling, however, contact related nickel sulphides were
observed in all 11 of the new holes completed and
following up drilling is ongoing.
Overall, drilling results at Beta Hunt continue to deliver
robust, continuous extensions to our major mineralized shear zones
which positions us well for our 2021 Reserve and Resource update. I
am particularly pleased that our team was able to complete the
initial phase of our aggressive Larkin drill program, overcoming
the well-known challenges with respect to the tight labour market
and COVID-19 related restrictions in Western Australia, both of which have
significantly increased assay turn around times at third party
labs. We look forward to delivering pending results as they become
available across several exciting targets and extensions at our
flagship underground operation."
Beta Hunt Drilling
The summary below covers new assay results received for 124
infill and extensional drill holes totalling 23,039 metres.
Turn-around times on assay results continue to be extremely slow
due to industry-wide third-party laboratory capacity issues
resulting from significantly increased demand for their services
exacerbated by pervasive labour supply hurdles related to COVID-19
restrictions. As restrictions ease, this situation is expected to
improve going forward.
Drilling to date has focused on extending and upgrading (infill
drilling) the Western Flanks, A Zone and Larkin Zone. Nickel
drilling was directed at following up the 50C Gamma Zone discovery
intersection of 11.6% Ni over 4.6 m
(KRR news release, April 6, 2021) and
infilling the 30C Mineral Resource.
Larkin Zone
The Larkin Zone is interpreted as the faulted southern offset of
the Western Flanks zone (see Figure 1). The 30C nickel resource
lies directly above the gold mineralization associated with the
Larkin Zone (See Karora Technical Report dated February 1, 2021, available on
www.sedar.com).
The current phase of drilling in the Larkin Zone was completed
in July 2021, totalling 123 holes for
16,207 metres with new assay results recently returned. The drill
program continued to test the southern extension of Larkin which
has now been drilled over 1,000 metres of strike and up to 150
metres below the nickel contact. The zone remains open both along
strike and at depth.
Since Karora's previous update on the Larkin Zone (see Karora
news release, May 12, 2021), assay
results have been received for an additional 24 holes with
significant results1.detailed below:
BL19-03AR:
|
6.2 g/t over 10.3
metres including 9.6g/t over 6.2 metres
|
BL19-04AR:
|
2.4 g/t over 10.6
metres
|
BL19-09AR:
|
9.4 g/t over 11.0
metres
|
BL19-14AR:
|
5.9 g/t over 3.2
metres
|
BL19-23AR:
|
15.2 g/t over 1.6
metres
|
EL-EA2-011AR:
|
20.5 g/t over 3.5
metres, including 87.9 g/t over 0.4 metres
|
1.
|
Interval lengths
are estimated true widths
|
The BL series of holes were designed to infill previously
reported drill results between the 40 Access drill cuddy and the
2460 access to the south. Recent results continue to support the
preliminary interpretation of the Larkin Zone comprising two to
three, steep dipping, mineralized zones (Figure 2) of varying
widths (3 metres to 12 metres) with mineralization associated with
biotite-albite-pyrite altered steep-dipping shear zones and narrow,
extensional quartz veins, similar in style to the A Zone and
Western Flanks deposits.
A Zone North (U/G)
A Zone North drilling totalled 27 holes for 4,473 metres
targeted to upgrade and extend the Inferred Mineral Resource along
the northern margin of the existing A Zone Mineral Resource.
Results show gold mineralization extends over 150 metres down-dip
of the existing mineral resource. Drilling is also supportive of a
continuation of the A Zone resource along strike to the north
resulting in potential for both up-dip and down dip extensions
(Figure 3). The most northern drill hole drilled in this campaign,
drill hole AA1380-040E, intersected 6.9 metres @ 4.6g/t.
Assay results from the A Zone North drilling are highlighted
below:
AA1380-034E:
|
3.9 g/t over 4.5
metres, including 9.0 g/t over 1.4 metres
|
AA1380-040E:
|
4.6 g/t over 6.9
metres including 5.1 g/t over 2.7 metres
|
AA1380-028E:
|
12.6 g/t over 4.1
metres
|
AA1380-017E:
|
2.7 g/t over 9.9
metres, including 3.9 g/t over 2.3 metres
|
1.
|
Interval lengths are
estimated true widths
|
Western Flanks South
Western Flanks South drilling totalled 10 holes for 2,824
metres. Drilling targeted the down-dip Inferred Mineral Resource
with the aim of upgrading the Mineral Resource to Indicated status
to support short term mine development. Results support the
existing resource model with assay highlights shown below:
AW18LV-14AR:
|
2.1 g/t over 8.0
metres and 13.5g/t over 2.0 metres
|
AW190-003EA:
|
7.9 g/t over 1.2
metres
|
1.
|
Interval lengths are
estimated true widths
|
Western Flanks North
Western Flanks North drilling totalled seven holes and 748
metres. Drilling targeted the northern margin of the Resource with
the aim of upgrading the Mineral Resource to Indicated status.
Results highlighted below are supportive of the existing resource
model:
AW18LV-14AR:
|
2.1 g/t over 8.0
metres and 13.5g/t over 2.0 metres
|
AW190-003EA:
|
7.9 g/t over 1.2
metres
|
1.
|
Interval lengths are
estimated true widths
|
Surface Drilling - Western Flanks North / A Zone North
Initial surface exploration drilling was undertaken to test the
near surface potential for both the Western Flanks and A Zone to
continue north along strike from the current underground resources.
The surface target area was the focus of nickel exploration by WMC
in the 1970s and 1980s who undertook limited shallow drilling
targeting the basalt/ultramafic nickel contact. The previous work
presented Karora the opportunity to test for gold mineralization
with surface drilling up to a 700 metre strike distance
from existing resources. Drilling included both RC and diamond
drilling and totalled 9 holes for 2,765 metres.
Drilling targeted the interpreted extensions of both the Western
Flanks and A Zone at variable depths to a maximum of 500 metres
below surface. Geological observations from logging the RC chips
and diamond core show very strong shearing up to 40 metres wide.
The strong shearing is along strike of Western Flanks and is
dominated by biotite-sericite-pyrite alteration with minor quartz
veining. The interpreted A Zone extensional position is associated
with a number of weak to moderate shear zones with minimal quartz
veining.
First pass assay results support Karora's geological theory,
intersecting gold mineralization associated with the interpreted
Western Flanks shear zone 700 metres north along strike from the
margin of the existing resource. The interpreted A Zone position,
located 300 metres north along strike of the existing
resource also provides encouragement for further work with a
best intersection of 4.7 g/t over 2 metres, including 9.3 g/t over
1.0 metres in drill hole AZ_m182RC_04AE.
Highlighted intersections from the surface drilling program are
shown below:
AZ_m182RC_04AE:
|
4.7 g/t over 2 metres
(78 to 80 metres downhole) including
9.3 g/t over 1.0 metre
|
AZN_p102_AE:
|
1.0 g/t over 8.0
metres (195 to 203 metres downhole) including
1.6g/t over 3.0 metres
|
AZN_P104AE:
|
0.5 g/t over 10.0
metres (284 to 294 metres downhole) including
2.1g/t over 1 metre
|
1.
|
Interval lengths
are downhole widths. True estimated widths cannot be determined
with available information.
|
Nickel Drilling
30C: Infill drilling continued to upgrade and extend
the 30C nickel trough. A total of fourteen holes for 812 metres was
completed over the reporting period. Significant results from the
recent drilling campaign are listed below:
B30-19-007NR:
|
2.4% Ni over 3.6
metres
|
B30-19-012NR:
|
1.2% Ni over 8.2
metres, including 2.8% Ni over 1.1 metre
|
BL19-009AR:
|
2.5% Ni over 2.1
metres
|
1.
|
Interval lengths are
estimated true widths
|
Western Flanks Nickel: Selected holes targeting the
up-dip position of the Western Flanks gold mineralization were
extended to test for contact-related nickel mineralization.
AW190-003EA returned a significant result of 2.3% Ni over 3.2
metres (estimated true width). The Western Flanks nickel
mineralization is typically more complex, related to multiple
thrusting, compared to the Beta nickel troughs to the south,
however, the recent results continue to provide encouragement to
further assess nickel mineralization in this area.
Gamma Zone/50C: Drilling commenced testing the potential
of the interpreted 50C nickel trough as a follow-up to the
discovery hole, G50-22-005E which intersected 11.6% Ni over 4.6
metres, including 18.4% Ni over 2.2 metres (see Karora news
release, April 6, 2021). Drilling is
aimed at defining the width and strike of the newly discovered
trough. To date 11 holes have been completed for 1,613 metres.
Contact-related nickel sulphides was observed in all
11 holes drilled to date with preliminary interpretation
indicating the trough to be 50 metres wide. Assay results are
pending at third-party labs. This first stage of follow-up drilling
is scheduled to be completed by the end of 2021.
Compliance Statement (JORC 2012 and NI 43-101)
The disclosure of scientific and technical information contained
in this news release has been reviewed and approved by Stephen
Devlin, FAusIMM, Group Geologist, Karora Resources Inc., a
Qualified Person for the purposes of NI 43-101.
At Beta Hunt all drill core sampling is conducted by Karora
personnel. Drill core samples for gold analysis in this instance
were shipped to ALS Laboratories, Perth for preparation and assaying by 50gram
fire assay analytical method. All gold diamond drilling samples
submitted for assay include at least one blank and one Certified
Reference Material ("CRM") per batch, plus one CRM or blank every
20 samples. In samples with observed visible gold mineralization, a
coarse blank is inserted after the visible gold mineralization to
serve as both a coarse flush to prevent contamination of subsequent
samples and a test for gold smearing from one sample to the next
which may have resulted from inadequate cleaning of the crusher and
pulveriser. The lab is also required to undertake a minimum of 1 in
20 wet screens on pulverised samples to ensure a minimum 90%
passing at -75µm. Samples for nickel analysis are shipped to SGS
Australia Mineral Services of Kalgoorlie for preparation. Pulps are
then shipped to Perth for assaying. The analytical
technique is ICP41Q, a four acid digest ICP-AES package. Assays
recorded above the upper detection limit (25,000ppm Ni) are
re-analyzed using the same technique with a greater dilution
(ICP43B). All samples submitted for nickel assay include at least
one Certified Reference Material (CRM) per batch, with a minimum of
one CRM per 20 samples. Where problems have been identified in QAQC
checks, Karora personnel and the SGS laboratory staff have actively
pursued and corrected the issues as standard procedure. Where
problems have been identified in QAQC checks, Karora personnel and
the SGS and ALS laboratory staff have actively pursued and
corrected the issues as standard procedure.
About Karora Resources
Karora is focused on doubling gold production to 200,000 ounces
by 2024 compared to 2020 and reducing costs at its integrated Beta
Hunt Gold Mine and Higginsville Gold Operations ("HGO") in
Western Australia. The
Higginsville treatment facility is a low-cost 1.6 Mtpa processing
plant, expanding to a planned 2.5 Mtpa by 2024, which is fed at
capacity from Karora's underground Beta Hunt mine and Higginsville
mines. At Beta Hunt, a robust gold Mineral Resource and Reserve is
hosted in multiple gold shears, with gold intersections along a 4
km strike length remaining open in multiple directions. HGO has a
substantial Mineral gold Resource and Reserve and prospective land
package totaling approximately 1,800 square kilometers. The Company
also owns the high grade Spargos Reward project which is
anticipated to begin mining in 2021. Karora has a strong Board and
management team focused on delivering shareholder value and
responsible mining, as demonstrated by Karora's commitment to
reducing emissions across its operations. Karora's common shares
trade on the TSX under the symbol KRR and also trade on the OTCQX
market under the symbol KRRGF.
Cautionary Statement Concerning Forward-Looking
Statements
This news release contains "forward-looking information"
including without limitation statements relating to the timing for
the completion of technical studies, the results of
exploration and development work, liquidity and capital resources
of Karora, production guidance and the potential of the Beta Hunt
Mine, Higginsville Gold Operation, the Aquarius Project and the
Spargos Gold Project.
Forward-looking statements involve known and unknown risks,
uncertainties and other factors which may cause the actual results,
performance or achievements of Karora to be materially different
from any future results, performance or achievements expressed or
implied by the forward-looking statements. Factors that could
affect the outcome include, among others: future prices and the
supply of metals; the results of drilling; inability to raise the
money necessary to incur the expenditures required to retain and
advance the properties; environmental liabilities (known and
unknown); general business, economic, competitive, political and
social uncertainties; results of exploration programs; accidents,
labour disputes and other risks of the mining industry; political
instability, terrorism, insurrection or war; or delays in obtaining
governmental approvals, projected cash operating costs, failure to
obtain regulatory or shareholder approvals. For a more detailed
discussion of such risks and other factors that could cause actual
results to differ materially from those expressed or implied by
such forward-looking statements, refer to Karora 's filings with
Canadian securities regulators, including the most recent Annual
Information Form, available on SEDAR at www.sedar.com.
Although Karora has attempted to identify important factors
that could cause actual actions, events or results to differ
materially from those described in forward-looking statements,
there may be other factors that cause actions, events or results to
differ from those anticipated, estimated or intended.
Forward-looking statements contained herein are made as of the date
of this news release and Karora disclaims any obligation to update
any forward-looking statements, whether as a result of new
information, future events or results or otherwise, except as
required by applicable securities laws.
Cautionary Statement Regarding the Higginsville Mining
Operations
A production decision at the Higginsville gold operations was
made by previous operators of the mine, prior to the completion of
the acquisition of the Higginsville gold operations by Karora and
Karora made a decision to continue production subsequent to the
acquisition. This decision by Karora to continue production and, to
the knowledge of Karora, the prior production decision were not
based on a feasibility study of mineral reserves, demonstrating
economic and technical viability, and, as a result, there may be an
increased uncertainty of achieving any particular level of recovery
of minerals or the cost of such recovery, which include increased
risks associated with developing a commercially mineable deposit.
Historically, such projects have a much higher risk of economic and
technical failure. There is no guarantee that anticipated
production costs will be achieved. Failure to achieve the
anticipated production costs would have a material adverse impact
on the Corporation's cash flow and future profitability. Readers
are cautioned that there is increased uncertainty and higher risk
of economic and technical failure associated with such production
decisions.
Table 1(a): Beta Hunt Gold- Significant Results -
January 1, 2021 to July 31, 2021
(plus A Zone 10 October
to 31st December, 2020)
Target/Prospect
|
Hole ID
|
Sub
interval
|
From(m)
|
To
(m)
|
Downhole Interval
(m)
|
Estimated True
Width
(m)
|
Au
(g/t)1.
|
A-Zone N
|
AA1380-011E
|
|
87.6
|
96.5
|
8.9
|
6.1
|
2.50
|
|
98.9
|
104.0
|
5.1
|
3.5
|
6.45
|
|
108.0
|
109.0
|
1.0
|
0.7
|
1.26
|
AA1380-012E
|
|
73.0
|
74.0
|
1.0
|
0.8
|
1.11
|
AA1380-013E
|
|
63.0
|
65.5
|
2.5
|
2.5
|
2.26
|
|
66.7
|
70.6
|
3.9
|
3.8
|
2.76
|
AA1380-015E
|
|
69.2
|
72.1
|
3.0
|
2.6
|
1.81
|
|
130.0
|
133.7
|
3.7
|
3.3
|
6.17
|
AA1380-016E
|
|
96.0
|
99.2
|
3.2
|
2.3
|
2.77
|
|
101.9
|
103.0
|
1.1
|
0.8
|
2.14
|
AA1380-017E
|
|
92.7
|
108.5
|
15.8
|
9.9
|
2.70
|
including
|
92.7
|
96.3
|
3.6
|
2.3
|
3.86
|
including
|
97.6
|
108.5
|
10.9
|
6.9
|
2.55
|
AA1380-018E
|
|
79.3
|
80.6
|
1.3
|
1.0
|
8.30
|
AA1380-020E
|
|
65.0
|
66.0
|
1.0
|
0.9
|
2.57
|
|
74.0
|
78.0
|
4.0
|
3.5
|
3.29
|
|
80.0
|
81.0
|
1.0
|
0.9
|
2.76
|
AA1380-021E
|
|
78.2
|
79.4
|
1.2
|
0.9
|
1.13
|
|
87.8
|
91.0
|
3.2
|
2.5
|
2.04
|
AA1380-023E
|
|
103.0
|
104.8
|
1.8
|
1.0
|
3.12
|
|
152.0
|
153.0
|
1.0
|
0.5
|
1.82
|
AA1380-024E
|
|
110.0
|
111.0
|
1.0
|
0.6
|
2.20
|
AA1380-025E
|
|
93.0
|
94.7
|
1.7
|
1.2
|
2.73
|
|
110.0
|
111.0
|
1.0
|
0.7
|
1.17
|
AA1380-026E
|
|
90.0
|
91.0
|
1.0
|
0.7
|
1.25
|
|
124.0
|
125.0
|
1.0
|
0.7
|
2.35
|
AA1380-027E
|
|
122.0
|
123.0
|
1.0
|
0.7
|
1.36
|
|
130.0
|
131.0
|
1.0
|
0.7
|
1.40
|
AA1380-028E
|
|
114.5
|
115.7
|
1.2
|
0.7
|
2.15
|
|
120.0
|
126.8
|
6.8
|
4.1
|
12.55
|
|
130.0
|
131.0
|
1.0
|
0.6
|
2.58
|
AA1380-029E
|
|
115.0
|
116.0
|
1.0
|
0.4
|
2.67
|
|
121.0
|
123.8
|
2.8
|
1.2
|
3.69
|
AA1380-030E
|
|
111.9
|
118.3
|
6.3
|
3.3
|
3.67
|
|
181.0
|
182.1
|
1.1
|
0.6
|
5.30
|
AA1380-031E
|
|
109.0
|
110.0
|
1.0
|
0.6
|
4.76
|
|
179.0
|
180.0
|
1.0
|
0.6
|
1.62
|
AA1380-034E
|
|
129.5
|
137.0
|
7.5
|
4.5
|
3.90
|
including
|
129.5
|
132.5
|
3.0
|
1.4
|
9.00
|
|
134.3
|
135.9
|
1.7
|
0.8
|
1.67
|
|
137.0
|
138.9
|
1.9
|
0.9
|
3.26
|
AA1380-040E
|
|
139.6
|
146.8
|
7.2
|
2.7
|
5.07
|
|
148.5
|
153.6
|
5.1
|
1.9
|
3.51
|
|
154.9
|
157.8
|
2.9
|
1.1
|
9.94
|
AA1380-041E
|
|
88.6
|
89.8
|
1.2
|
0.7
|
3.36
|
|
96.0
|
97.0
|
1.0
|
0.6
|
2.92
|
AA1380-041E
|
|
114.0
|
115.7
|
1.7
|
1.0
|
1.58
|
AA1380-042E
|
|
122.7
|
123.8
|
1.1
|
0.6
|
1.16
|
|
125.2
|
126.4
|
1.2
|
0.6
|
1.24
|
|
129.1
|
130.5
|
1.4
|
0.8
|
1.20
|
|
131.9
|
133.0
|
1.2
|
0.6
|
1.18
|
|
135.8
|
139.7
|
3.9
|
2.1
|
1.85
|
|
145.1
|
146.7
|
1.6
|
0.8
|
1.70
|
A-Zone North Surface
Holes2.
|
AZ_m182_RC_04_AE
|
|
78.0
|
80.0
|
2.0
|
_
|
4.66
|
including
|
79.0
|
80.0
|
1.0
|
_
|
9.30
|
AZN_p102_AE
|
|
195.0
|
203.0
|
8.0
|
_
|
0.98
|
including
|
198.0
|
201.0
|
3.0
|
_
|
1.55
|
|
509.0
|
510.0
|
1.0
|
_
|
1.20
|
AZN_p103_AE
|
|
202.0
|
210.2
|
8.2
|
_
|
0.58
|
including
|
205.0
|
206.0
|
1.0
|
_
|
1.13
|
AZN_P104AE
|
|
284.0
|
294.0
|
10.0
|
_
|
0.48
|
including
|
290.0
|
291.0
|
1.0
|
_
|
2.06
|
|
300.0
|
304.0
|
4.0
|
_
|
0.46
|
A-Zone North
Geotech
|
SPG-p003-GT
|
|
42.7
|
44.7
|
2.0
|
_
|
2.97
|
|
AW13LNC-03AR
|
|
118.0
|
120.4
|
2.4
|
1.4
|
5.25
|
|
124.4
|
126.0
|
1.6
|
1.0
|
2.19
|
AW18LV-14AR
|
|
86.0
|
94.0
|
8.0
|
8.0
|
2.14
|
|
108.0
|
109.8
|
1.8
|
1.8
|
3.64
|
|
113.0
|
115.0
|
2.0
|
2.0
|
13.45
|
|
121.5
|
123.0
|
1.5
|
1.5
|
1.18
|
AW190-003E
|
|
10.3
|
13.0
|
2.7
|
1.7
|
1.20
|
AW190-003EA
|
|
11.0
|
12.0
|
1.0
|
0.5
|
2.21
|
|
52.0
|
53.0
|
1.0
|
0.6
|
11.78
|
|
63.9
|
66.0
|
2.1
|
1.2
|
7.87
|
|
87.0
|
94.6
|
7.6
|
4.4
|
1.70
|
|
B30-19-003NR
|
|
5.0
|
10.2
|
5.2
|
0.3
|
1.19
|
B30-19-004NR
|
|
17.5
|
20.0
|
2.5
|
0.1
|
1.82
|
|
32.6
|
33.9
|
1.3
|
0.0
|
1.82
|
B30-19-006NR
|
|
37.0
|
45.0
|
8.0
|
0.3
|
2.06
|
B30-19-007NR
|
|
2.8
|
3.8
|
1.0
|
0.0
|
1.36
|
|
12.0
|
13.0
|
1.0
|
0.0
|
1.26
|
|
20.1
|
23.8
|
3.8
|
0.2
|
1.89
|
B30-19-009NR
|
|
43.0
|
44.0
|
1.0
|
0.1
|
1.53
|
|
48.0
|
53.0
|
5.0
|
0.7
|
1.81
|
|
59.0
|
62.0
|
3.0
|
0.4
|
1.77
|
B30-19-011NR
|
|
11.9
|
13.9
|
2.0
|
0.6
|
1.60
|
B30-19-012NR
|
|
24.5
|
25.5
|
1.0
|
0.1
|
67.94
|
B30-19-014NR
|
|
5.0
|
8.0
|
3.0
|
0.1
|
1.96
|
|
19.0
|
20.6
|
1.6
|
0.0
|
1.57
|
|
26.0
|
30.0
|
4.0
|
0.0
|
3.22
|
|
33.0
|
40.0
|
7.0
|
0.1
|
1.75
|
Beta
|
B40-17-007E
|
|
39.2
|
43.1
|
3.9
|
0.7
|
2.12
|
|
62.0
|
63.1
|
1.1
|
0.2
|
1.65
|
|
90.3
|
92.6
|
2.3
|
0.4
|
1.11
|
BE20-227RL
|
|
25.5
|
26.5
|
1.0
|
0.8
|
1.15
|
|
32.2
|
34.0
|
1.8
|
1.5
|
2.93
|
|
99.4
|
101.0
|
1.6
|
1.3
|
1.82
|
Larkin
|
BL19-01AR
|
|
26.0
|
38.0
|
12.0
|
4.0
|
2.75
|
|
76.0
|
77.0
|
1.0
|
0.4
|
1.17
|
|
89.0
|
90.0
|
1.0
|
0.3
|
1.11
|
BL19-02AR
|
|
12.0
|
15.0
|
3.0
|
1.7
|
1.42
|
|
18.8
|
20.0
|
1.2
|
0.7
|
3.74
|
|
53.0
|
54.0
|
1.0
|
0.6
|
9.19
|
|
57.0
|
58.0
|
1.0
|
0.6
|
1.14
|
|
69.0
|
70.0
|
1.0
|
0.6
|
3.52
|
BL19-03AR
|
|
5.2
|
10.5
|
5.3
|
4.8
|
1.23
|
|
33.0
|
44.2
|
11.2
|
10.3
|
6.18
|
including
|
33.0
|
39.7
|
6.7
|
6.2
|
9.60
|
|
46.7
|
50.5
|
3.9
|
3.5
|
1.74
|
|
64.0
|
65.0
|
1.0
|
0.9
|
6.71
|
|
71.0
|
72.5
|
1.5
|
1.4
|
1.68
|
BL19-04AR
|
|
7.0
|
8.0
|
1.0
|
0.9
|
4.40
|
|
18.4
|
19.4
|
1.0
|
0.9
|
3.62
|
|
37.2
|
49.0
|
11.8
|
10.6
|
2.41
|
|
54.0
|
55.0
|
1.0
|
0.9
|
1.48
|
|
57.6
|
59.0
|
1.4
|
1.3
|
1.87
|
|
62.6
|
64.0
|
1.4
|
1.3
|
1.94
|
BL19-06AR
|
|
22.0
|
23.0
|
1.0
|
0.5
|
2.86
|
BL19-07AR
|
|
10.4
|
15.2
|
4.8
|
3.3
|
1.34
|
|
18.4
|
20.0
|
1.6
|
1.1
|
1.04
|
|
43.8
|
49.4
|
5.6
|
4.0
|
2.46
|
|
59.3
|
63.6
|
4.3
|
3.0
|
2.90
|
|
68.4
|
72.4
|
4.0
|
2.8
|
2.70
|
|
79.6
|
81.3
|
1.7
|
1.2
|
1.58
|
|
86.8
|
94.0
|
7.2
|
5.1
|
1.68
|
BL19-08AR
|
|
10.2
|
14.4
|
4.2
|
2.9
|
1.39
|
|
20.2
|
21.3
|
1.2
|
0.8
|
8.86
|
|
43.0
|
44.0
|
1.0
|
0.7
|
1.52
|
|
61.0
|
67.3
|
6.3
|
4.5
|
2.30
|
BL19-09AR
|
|
60.5
|
73.0
|
12.5
|
11.0
|
9.39
|
|
90.0
|
91.0
|
1.0
|
0.9
|
5.21
|
|
95.5
|
101.8
|
6.3
|
5.6
|
3.38
|
|
106.0
|
110.0
|
4.0
|
3.6
|
4.27
|
BL19-10AR
|
|
54.0
|
55.4
|
1.4
|
1.3
|
1.64
|
|
68.1
|
69.7
|
1.6
|
1.5
|
1.05
|
|
94.0
|
97.0
|
3.0
|
2.8
|
2.87
|
|
101.1
|
104.0
|
2.9
|
2.7
|
2.61
|
|
112.9
|
122.1
|
9.2
|
8.5
|
1.76
|
|
126.0
|
127.0
|
1.0
|
0.9
|
6.19
|
|
145.0
|
146.0
|
1.0
|
0.9
|
1.79
|
BL19-11AR
|
|
5.0
|
8.0
|
3.0
|
2.2
|
1.60
|
|
13.6
|
14.8
|
1.2
|
0.9
|
1.81
|
|
25.0
|
28.0
|
3.0
|
2.2
|
2.55
|
|
36.0
|
37.0
|
1.0
|
0.7
|
1.80
|
|
42.1
|
47.0
|
5.0
|
3.6
|
1.62
|
|
68.0
|
69.0
|
1.0
|
0.7
|
1.28
|
BL19-13AR
|
|
2.0
|
6.0
|
4.0
|
3.6
|
1.52
|
|
61.0
|
62.5
|
1.5
|
1.4
|
1.06
|
|
80.2
|
81.8
|
1.5
|
1.4
|
2.82
|
|
98.0
|
99.6
|
1.6
|
1.5
|
2.29
|
BL19-14AR
|
|
4.0
|
5.0
|
1.0
|
1.0
|
1.19
|
|
10.0
|
14.0
|
4.0
|
3.9
|
2.58
|
|
24.9
|
26.0
|
1.1
|
1.1
|
1.56
|
|
55.9
|
57.0
|
1.1
|
1.1
|
4.70
|
|
87.0
|
88.0
|
1.0
|
1.0
|
1.21
|
|
92.0
|
95.3
|
3.3
|
3.2
|
5.88
|
|
98.0
|
100.0
|
2.0
|
1.9
|
1.96
|
BL19-15AR
|
|
19.0
|
20.0
|
1.0
|
0.8
|
1.97
|
|
44.0
|
51.0
|
7.0
|
5.3
|
1.60
|
|
73.0
|
74.0
|
1.0
|
0.8
|
1.23
|
|
84.0
|
85.0
|
1.0
|
0.8
|
3.28
|
|
106.0
|
107.0
|
1.0
|
0.8
|
1.79
|
|
110.0
|
117.0
|
7.0
|
5.4
|
1.54
|
BL19-16AR
|
|
5.0
|
7.0
|
2.0
|
1.1
|
1.35
|
|
26.0
|
27.0
|
1.0
|
0.5
|
1.96
|
|
32.0
|
33.0
|
1.0
|
0.5
|
1.65
|
|
38.0
|
39.0
|
1.0
|
0.5
|
2.02
|
|
60.0
|
61.0
|
1.0
|
0.5
|
2.97
|
|
73.0
|
74.3
|
1.3
|
0.7
|
1.47
|
|
80.0
|
83.0
|
3.0
|
1.6
|
1.74
|
|
104.0
|
114.0
|
10.0
|
5.4
|
1.44
|
|
117.0
|
121.0
|
4.0
|
2.2
|
1.64
|
BL19-18AR
|
|
11.4
|
14.2
|
2.8
|
2.1
|
1.50
|
|
57.0
|
58.0
|
1.0
|
0.8
|
1.34
|
|
64.0
|
65.8
|
1.8
|
1.4
|
1.12
|
|
70.5
|
72.0
|
1.6
|
1.2
|
1.29
|
|
123.0
|
126.0
|
3.0
|
2.4
|
3.65
|
BL19-21AR
|
|
8.0
|
9.0
|
1.0
|
0.7
|
1.62
|
|
13.0
|
14.0
|
1.0
|
0.7
|
1.44
|
|
22.0
|
23.0
|
1.0
|
0.7
|
3.82
|
|
60.1
|
64.0
|
3.9
|
2.9
|
1.41
|
|
70.0
|
73.0
|
3.0
|
2.2
|
2.29
|
|
76.0
|
77.0
|
1.0
|
0.7
|
1.81
|
|
82.0
|
85.0
|
3.0
|
2.2
|
1.75
|
|
101.9
|
103.0
|
1.1
|
0.8
|
3.09
|
BL19-23AR
|
|
3.0
|
4.5
|
1.5
|
1.3
|
11.67
|
|
20.0
|
22.0
|
2.0
|
1.8
|
1.05
|
|
39.0
|
40.0
|
1.0
|
0.9
|
3.46
|
|
44.0
|
45.8
|
1.8
|
1.6
|
15.24
|
|
55.0
|
58.0
|
3.0
|
2.6
|
2.87
|
|
60.6
|
62.8
|
2.2
|
1.9
|
1.49
|
|
66.0
|
72.0
|
6.0
|
5.3
|
2.56
|
|
75.0
|
76.0
|
1.0
|
0.9
|
1.35
|
BL19-24AR
|
|
1.0
|
2.1
|
1.1
|
0.7
|
14.55
|
|
37.0
|
38.4
|
1.4
|
0.9
|
1.28
|
|
62.0
|
63.0
|
1.0
|
0.6
|
2.53
|
|
70.0
|
71.0
|
1.0
|
0.6
|
4.01
|
|
78.4
|
79.4
|
1.0
|
0.6
|
4.78
|
|
88.0
|
89.0
|
1.0
|
0.6
|
2.15
|
|
115.0
|
116.0
|
1.0
|
0.6
|
1.64
|
BL19-25AR
|
|
6.0
|
7.0
|
1.0
|
0.4
|
1.18
|
|
11.0
|
12.0
|
1.0
|
0.4
|
1.26
|
|
65.0
|
66.0
|
1.0
|
0.4
|
1.45
|
|
68.0
|
69.8
|
1.8
|
0.8
|
1.41
|
|
110.0
|
111.0
|
1.0
|
0.4
|
1.13
|
|
114.0
|
115.0
|
1.0
|
0.4
|
2.03
|
|
119.8
|
121.0
|
1.2
|
0.5
|
1.90
|
|
134.0
|
137.0
|
3.0
|
1.3
|
1.52
|
BL19-26AR
|
|
17.0
|
20.5
|
3.5
|
2.3
|
1.53
|
|
33.0
|
34.0
|
1.0
|
0.7
|
1.19
|
|
60.4
|
61.5
|
1.1
|
0.7
|
1.62
|
|
72.0
|
73.5
|
1.5
|
1.0
|
1.07
|
|
75.6
|
77.0
|
1.4
|
0.9
|
1.84
|
|
130.0
|
131.0
|
1.0
|
0.7
|
1.14
|
BL19-27AR
|
|
16.0
|
17.0
|
1.0
|
0.9
|
1.29
|
|
31.0
|
32.0
|
1.0
|
0.9
|
1.06
|
|
46.0
|
47.0
|
1.0
|
0.9
|
1.08
|
|
62.6
|
64.1
|
1.5
|
1.4
|
1.01
|
|
78.0
|
83.0
|
5.0
|
4.6
|
1.51
|
BL19-28AR
|
|
14.2
|
16.6
|
2.4
|
1.7
|
2.08
|
|
33.0
|
34.0
|
1.0
|
0.7
|
1.92
|
|
52.0
|
53.0
|
1.0
|
0.7
|
2.52
|
EL-EA2-011AR
|
|
4.0
|
5.6
|
1.6
|
1.2
|
2.14
|
|
50.6
|
51.6
|
1.0
|
0.8
|
1.65
|
|
152.5
|
157.0
|
4.5
|
3.5
|
20.49
|
including
|
154.0
|
154.5
|
0.5
|
0.4
|
87.90
|
|
179.0
|
181.0
|
2.0
|
1.6
|
3.84
|
|
208.0
|
209.0
|
1.0
|
0.8
|
4.40
|
|
211.9
|
213.5
|
1.6
|
1.2
|
1.66
|
|
218.4
|
220.1
|
1.7
|
1.3
|
3.73
|
|
312.0
|
315.0
|
3.0
|
2.3
|
3.20
|
|
326.1
|
327.2
|
1.1
|
0.9
|
3.69
|
Western Flanks
South
|
WW370-01AE
|
|
29.5
|
31.5
|
2.0
|
1.6
|
1.61
|
|
164.0
|
165.6
|
1.6
|
1.3
|
5.46
|
|
171.0
|
178.0
|
7.0
|
5.7
|
2.11
|
WW370-06AR
|
|
26.0
|
28.0
|
2.0
|
1.6
|
3.12
|
|
93.0
|
94.0
|
1.0
|
0.8
|
10.60
|
|
146.0
|
159.0
|
13.0
|
10.7
|
5.14
|
WW370-07AR
|
|
131.0
|
132.0
|
1.0
|
0.8
|
1.05
|
|
145.0
|
146.2
|
1.2
|
1.0
|
1.24
|
|
187.0
|
189.0
|
2.0
|
1.7
|
3.36
|
|
223.0
|
224.0
|
1.0
|
0.9
|
1.78
|
WW370-10AE
|
|
30.4
|
33.7
|
3.3
|
2.0
|
1.77
|
|
99.0
|
100.0
|
1.0
|
0.6
|
2.32
|
|
204.8
|
210.0
|
5.2
|
3.6
|
3.45
|
WW370-11AE
|
|
34.2
|
35.5
|
1.2
|
0.7
|
2.67
|
|
70.0
|
71.0
|
1.0
|
0.6
|
1.14
|
|
195.7
|
196.7
|
1.0
|
0.7
|
3.52
|
|
202.2
|
204.0
|
1.8
|
1.2
|
1.69
|
|
207.0
|
208.1
|
1.1
|
0.8
|
1.22
|
|
237.0
|
240.0
|
3.0
|
2.1
|
2.25
|
WW395-02AR
|
|
37.0
|
38.5
|
1.5
|
1.2
|
1.70
|
|
63.5
|
64.7
|
1.2
|
0.9
|
1.09
|
|
173.0
|
178.0
|
5.0
|
3.9
|
6.22
|
WW395-04AR
|
|
35.0
|
39.7
|
4.7
|
3.3
|
1.70
|
|
261.0
|
262.2
|
1.2
|
0.8
|
1.23
|
WW395-05AR
|
|
35.8
|
38.0
|
2.2
|
1.6
|
4.78
|
|
65.9
|
67.0
|
1.1
|
0.8
|
1.36
|
|
181.7
|
189.0
|
7.3
|
5.6
|
6.02
|
|
192.0
|
194.6
|
2.6
|
2.0
|
4.01
|
WW395-10AE
|
|
43.0
|
45.0
|
2.0
|
1.1
|
2.36
|
|
112.7
|
114.2
|
1.5
|
0.9
|
3.71
|
|
127.0
|
129.0
|
2.0
|
1.2
|
4.01
|
|
321.6
|
324.0
|
2.4
|
1.4
|
4.51
|
|
328.0
|
329.6
|
1.6
|
0.9
|
2.38
|
WW395-11AE
|
|
43.0
|
44.4
|
1.4
|
0.8
|
5.31
|
|
248.0
|
249.0
|
1.0
|
0.6
|
3.56
|
|
319.0
|
320.0
|
1.0
|
0.6
|
1.81
|
|
323.0
|
324.0
|
1.0
|
0.6
|
2.57
|
|
328.8
|
329.8
|
1.1
|
0.6
|
2.04
|
1.
|
Reported gold
grades > 1.0 g/t downhole.
|
2.
|
A Zone North
surface drilling assays > 0.3 g/t over 1 metre downhole; true
width cannot be estimate with available information.
|
Table 1(b): Beta Hunt Nickel – Significant Results –
January 1, 2021 to July 31, 2021(excludes results previously
released in 2021)
Target/Prospect
|
Hole
ID
|
Sub
interval
|
From
(m)
|
To
(m)
|
Downhole
Interval
(m)
|
Estimated True
Width
(m)
|
Ni
(%)1.
|
Western
Flanks
|
AW190-003EA
|
|
94.1
|
98.4
|
4.4
|
3.2
|
2.33
|
BETA
|
B30-19-004NR
|
|
24.8
|
25.0
|
0.2
|
0.2
|
1.94
|
B30-19-006NR
|
|
46.0
|
47.3
|
1.3
|
1.0
|
0.57
|
B30-19-007NR
|
|
24.3
|
28.7
|
4.4
|
3.6
|
2.35
|
B30-19-009NR
|
|
40.5
|
42.0
|
1.5
|
0.9
|
1.46
|
B30-19-012NR
|
|
22.0
|
33.0
|
11.0
|
8.2
|
1.22
|
Including
|
24.5
|
26.1
|
1.6
|
1.1
|
2.84
|
B30-19-014NR
|
|
40.3
|
40.6
|
0.3
|
0.3
|
0.56
|
B40-17-007E
|
|
113.3
|
118.2
|
4.9
|
3.0
|
1.32
|
BL19-09AR
|
|
49.7
|
64.3
|
14.6
|
2.1
|
2.54
|
BL19-13AR
|
|
45.5
|
52.8
|
7.3
|
1.4
|
1.36
|
|
56.0
|
58.0
|
2.0
|
0.4
|
0.63
|
|
77.4
|
80.2
|
2.8
|
0.5
|
2.16
|
Table 2 Drillhole Collars – Beta Hunt from January 1, 2021 to July
31, 2021
Target/
Prospect
|
Hole
ID
|
MGA_N
|
MGA_E
|
mRL
|
AZI
|
DIP
|
Total
Length (m)
|
AZONE North Surface
Holes
|
AZN_p102_AE
|
6545112.4
|
373717.2
|
288.6
|
68.5
|
-49.3
|
520.7
|
AZN_p103_AE
|
6545112.2
|
373716.6
|
288.7
|
62.2
|
-57.0
|
576.3
|
AZN_P104AE
|
6545111.5
|
373715.2
|
288.7
|
57.4
|
-65.0
|
423.1
|
AZ_m182_RCD_06_AE
|
6545371.7
|
373709.8
|
295.6
|
51.5
|
-60.0
|
309.8
|
AZ_m182_RCD_07_AE
|
6545393.8
|
373735.1
|
296.5
|
51.1
|
-58.7
|
60.0
|
AZ_m182_RCD_08_AE
|
6545413.5
|
373763.8
|
298.8
|
55.8
|
-60.8
|
170.5
|
AZ_m182_RCD_09_AE
|
6545336.1
|
373664.6
|
294.6
|
52.0
|
-60.5
|
444.4
|
AZ_m182_RC_04_AE
|
6545327.1
|
373817.8
|
300.4
|
57.5
|
-60.5
|
130.0
|
AZ_m182_RC_05_AE
|
6545349.6
|
373845.4
|
301.9
|
49.0
|
-61.0
|
130.0
|
AZONE
|
AA1380-017E
|
6544837.5
|
374169.4
|
-153.0
|
17.7
|
-46.3
|
159.1
|
AA1380-018E
|
6544837.6
|
374169.5
|
-152.9
|
18.3
|
-31.1
|
126.0
|
AA1380-019E
|
6544837.7
|
374169.4
|
-152.7
|
15.9
|
-13.7
|
111.0
|
AA1380-020E
|
6544837.9
|
374169.3
|
-151.8
|
19.2
|
7.4
|
107.9
|
AA1380-021E
|
6544838.0
|
374169.5
|
-149.7
|
21.1
|
25.4
|
146.7
|
AA1380-022E
|
6544837.9
|
374169.3
|
-149.4
|
21.2
|
38.7
|
146.5
|
AA1380-023E
|
6544840.8
|
374166.2
|
-152.8
|
358.4
|
-41.1
|
173.7
|
AA1380-024E
|
6544841.0
|
374166.2
|
-152.7
|
0.5
|
-27.9
|
164.6
|
AA1380-025E
|
6544841.4
|
374166.1
|
-152.6
|
0.8
|
-13.8
|
155.3
|
AA1380-026E
|
6544841.5
|
374165.9
|
-151.7
|
3.6
|
3.6
|
146.8
|
AA1380-027E
|
6544841.6
|
374165.7
|
-151.0
|
4.1
|
20.8
|
155.4
|
AA1380-028E
|
6544841.5
|
374165.4
|
-150.0
|
5.5
|
35.8
|
197.7
|
AA1380-029E
|
6544840.9
|
374165.9
|
-152.7
|
349.2
|
-36.4
|
215.7
|
AA1380-030E
|
6544840.9
|
374165.7
|
-152.6
|
351.0
|
-25.3
|
194.5
|
AA1380-031E
|
6544841.1
|
374165.7
|
-152.6
|
347.7
|
-11.9
|
197.3
|
AA1380-032E
|
6544841.5
|
374165.8
|
-151.7
|
351.8
|
5.9
|
170.6
|
AA1380-033E
|
6544841.6
|
374165.6
|
-150.3
|
351.3
|
18.3
|
179.6
|
AA1380-034E
|
6544841.5
|
374165.4
|
-149.5
|
349.9
|
28.4
|
203.7
|
AA1380-011E
|
6544837.4
|
374169.5
|
-153.0
|
42.6
|
-48.4
|
202.0
|
AA1380-012E
|
6544837.5
|
374169.5
|
-153.0
|
40.9
|
-34.5
|
131.9
|
AA1380-013E
|
6544837.6
|
374169.4
|
-152.7
|
40.5
|
-16.9
|
137.8
|
AA1380-014E
|
6544837.3
|
374169.8
|
-151.8
|
42.4
|
5.5
|
138.2
|
AA1380-015E
|
6544837.9
|
374169.4
|
-149.7
|
42.3
|
23.7
|
149.6
|
AA1380-016E
|
6544837.4
|
374169.9
|
-151.0
|
45.8
|
40.2
|
153.5
|
AA1380-040E
|
6544841.4
|
374165.8
|
-151.5
|
342.1
|
23.6
|
215.7
|
AA1380-041E
|
6544812.7
|
374205.0
|
-153.1
|
56.3
|
-57.2
|
185.9
|
AA1380-042E
|
6544812.5
|
374205.1
|
-153.3
|
82.4
|
-51.6
|
206.9
|
FLETCHER
|
AF18LV-07AE
|
6544421.0
|
374623.3
|
-269.7
|
248.5
|
-34.6
|
554.8
|
AF18LV-16AE
|
6544422.7
|
374627.7
|
-268.0
|
224.5
|
-31.0
|
639.4
|
WESTERN
FLANKS
|
AWF190RB-001
|
6544295.7
|
374744.4
|
-186.7
|
86.6
|
86.7
|
95.0
|
AW13LNC-01AR
|
6544529.0
|
374500.6
|
-151.6
|
254.8
|
31.8
|
80.6
|
AW13LNC-02AR
|
6544528.9
|
374500.8
|
-153.7
|
253.0
|
-5.2
|
120.1
|
AW13LNC-03AR
|
6544529.0
|
374500.8
|
-154.4
|
259.4
|
-41.1
|
156.1
|
AW18LV-14AR
|
6544419.6
|
374624.3
|
-268.8
|
227.8
|
-0.3
|
135.2
|
AW190-003E
|
6544359.6
|
374673.5
|
-189.0
|
263.4
|
39.6
|
14.6
|
AW190-003EA
|
6544359.6
|
374673.5
|
-189.0
|
267.0
|
38.0
|
146.7
|
LARKIN
|
BE20-227RL
|
6542394.4
|
375806.6
|
-399.7
|
250.7
|
25.4
|
122.0
|
BL19-01AR
|
6542706.0
|
375462.5
|
-385.8
|
35.8
|
-72.1
|
165.1
|
BL19-02AR
|
6542706.0
|
375462.6
|
-385.9
|
38.3
|
-56.2
|
110.4
|
BL19-03AR
|
6542706.8
|
375464.0
|
-385.3
|
37.2
|
-24.5
|
87.0
|
BL19-04AR
|
6542706.3
|
375464.0
|
-383.5
|
42.2
|
22.6
|
77.5
|
BL19-06AR
|
6542706.5
|
375464.0
|
-385.4
|
88.6
|
-53.4
|
105.0
|
BL19-07AR
|
6542706.7
|
375464.0
|
-385.2
|
85.8
|
-22.6
|
96.2
|
BL19-08AR
|
6542706.7
|
375463.9
|
-383.3
|
85.4
|
20.2
|
83.8
|
BL19-09AR
|
6542602.4
|
375509.4
|
-388.4
|
24.8
|
14.7
|
125.7
|
BL19-10AR
|
6542602.4
|
375509.6
|
-389.5
|
26.1
|
-13.5
|
150.0
|
BL19-11AR
|
6542602.2
|
375509.8
|
-390.3
|
23.6
|
-38.9
|
146.8
|
BL19-13AR
|
6542601.7
|
375510.1
|
-388.3
|
48.8
|
19.4
|
113.8
|
BL19-14AR
|
6542602.3
|
375509.7
|
-389.5
|
51.7
|
-14.2
|
105.0
|
BL19-15AR
|
6542602.0
|
375510.0
|
-390.3
|
52.1
|
-42.3
|
158.9
|
BL19-16AR
|
6542601.9
|
375509.9
|
-390.4
|
53.1
|
-58.8
|
188.9
|
BL19-17AR
|
6542529.0
|
375573.5
|
-389.4
|
7.9
|
18.1
|
134.7
|
BL19-18AR
|
6542528.9
|
375573.4
|
-390.6
|
8.8
|
-7.4
|
140.8
|
BL19-20AR
|
6542528.8
|
375573.5
|
-390.7
|
36.0
|
-10.5
|
90.1
|
BL19-21AR
|
6542528.6
|
375573.6
|
-391.6
|
34.2
|
-44.6
|
128.0
|
BETA
|
BL19-23AR
|
6542528.6
|
375573.7
|
-390.7
|
73.2
|
-10.7
|
96.0
|
LARKIN
|
BL19-24AR
|
6542528.2
|
375574.0
|
-391.5
|
76.7
|
-43.1
|
125.6
|
BETA
|
BL19-25AR
|
6542528.1
|
375574.0
|
-391.7
|
78.6
|
-60.1
|
164.7
|
LARKIN
|
BL19-26AR
|
6542528.7
|
375573.4
|
-391.4
|
6.7
|
-34.7
|
140.7
|
BL19-27AR
|
6542492.3
|
375605.9
|
-391.9
|
66.3
|
-12.5
|
90.0
|
BL19-28AR
|
6542492.3
|
375605.9
|
-392.5
|
66.4
|
-45.6
|
117.0
|
BETA
|
B30-19-001NR
|
6542608.6
|
375563.4
|
-384.0
|
235.8
|
70.8
|
47.8
|
B30-19-002NR
|
6542612.6
|
375569.4
|
-385.0
|
0.8
|
89.2
|
36.0
|
B30-19-003NR
|
6542618.4
|
375577.3
|
-384.3
|
223.1
|
89.3
|
65.9
|
B30-19-004NR
|
6542623.6
|
375586.1
|
-383.2
|
290.3
|
89.0
|
48.0
|
B30-19-005NR
|
6542614.3
|
375565.0
|
-385.4
|
289.4
|
41.1
|
53.7
|
B30-19-006NR
|
6542614.4
|
375565.1
|
-385.0
|
314.0
|
51.6
|
47.3
|
B30-19-007NR
|
6542618.0
|
375573.5
|
-385.0
|
322.0
|
55.7
|
47.5
|
B30-19-008NR
|
6542622.7
|
375580.8
|
-384.8
|
338.4
|
58.2
|
65.7
|
B30-19-009NR
|
6542622.8
|
375580.5
|
-385.0
|
327.3
|
38.6
|
62.8
|
B30-19-010NR
|
6542611.8
|
375573.8
|
-386.0
|
138.4
|
29.7
|
59.6
|
B30-19-011NR
|
6542616.8
|
375581.6
|
-385.0
|
157.1
|
43.9
|
41.7
|
B30-19-012NR
|
6542617.1
|
375581.8
|
-385.0
|
127.9
|
52.4
|
47.6
|
B30-19-014NR
|
6542623.0
|
375589.2
|
-383.9
|
132.9
|
70.0
|
51.0
|
B40-17-007E
|
6542884.6
|
375403.3
|
-401.8
|
296.8
|
33.7
|
137.7
|
LARKIN
|
EL-EA2-005AR
|
6542925.3
|
375514.5
|
-420.6
|
247.6
|
-23.5
|
330.0
|
EL-EA2-011AR
|
6542925.3
|
375514.5
|
-420.6
|
258.5
|
-19.7
|
327.2
|
GAMMA
|
G10-22-002NR
|
6541833.1
|
376253.7
|
-334.0
|
194.0
|
41.3
|
125.7
|
G10-22-003NR
|
6541833.1
|
376255.7
|
-333.0
|
189.6
|
55.4
|
107.2
|
G10-22-005NR
|
6541834.1
|
376256.7
|
-333.0
|
129.6
|
71.9
|
117.0
|
G10-22-006NR
|
6541835.1
|
376257.7
|
-333.0
|
102.1
|
66.6
|
107.8
|
G50-22-006NE
|
6541840.1
|
376249.7
|
-336.0
|
216.9
|
30.4
|
176.6
|
G50-22-009NR
|
6541849.0
|
376242.6
|
-338.0
|
227.0
|
17.3
|
216.1
|
G50-22-010NR
|
6541849.0
|
376242.6
|
-335.0
|
228.8
|
23.9
|
194.8
|
G50-22-011NR
|
6541849.0
|
376242.6
|
-335.0
|
224.1
|
29.8
|
152.8
|
G55-22-002NE
|
6541840.1
|
376249.7
|
-334.0
|
220.9
|
53.4
|
113.6
|
G55-22-003NE
|
6541838.1
|
376250.7
|
-336.0
|
192.0
|
27.0
|
176.8
|
G55-22-004NR
|
6541849.0
|
376243.6
|
-334.0
|
227.6
|
43.5
|
125.2
|
WESTERN
FLANKS
|
WW370-01AE
|
6543785.8
|
375259.4
|
-369.9
|
222.7
|
-34.3
|
234.0
|
WW370-06AR
|
6543785.7
|
375259.4
|
-369.1
|
195.3
|
-9.4
|
243.0
|
WW370-07AR
|
6543785.7
|
375259.6
|
-368.8
|
195.1
|
5.4
|
245.9
|
WW370-10AE
|
6543785.6
|
375259.6
|
-369.2
|
182.1
|
-10.1
|
348.0
|
WW370-11AE
|
6543785.6
|
375259.7
|
-368.9
|
182.1
|
5.3
|
306.1
|
WW395-02AR
|
6543803.3
|
375247.6
|
-395.5
|
198.7
|
-27.1
|
240.1
|
WW395-04AR
|
6543803.5
|
375247.8
|
-395.5
|
188.1
|
-26.1
|
273.0
|
WW395-05AR
|
6543803.4
|
375247.8
|
-395.2
|
188.6
|
-13.8
|
258.0
|
WW395-10AE
|
6543803.4
|
375248.7
|
-395.2
|
175.0
|
-22.9
|
344.9
|
WW395-11AE
|
6543803.5
|
375248.6
|
-395.4
|
172.6
|
-14.6
|
330.9
|
SOURCE Karora Resources Inc.