All five holes find excellent gold and
copper grades over sizeable widths
Trading Symbols:
TSX:
SEA
NYSE:
SA
TORONTO, Nov. 3, 2015 /CNW/ - Seabridge Gold today
announced that results from the final two core holes drilled into
Deep Kerr at its 100% owned KSM Project in northwestern
British Columbia continue to
expand the size of a potential low cost, underground block cave
mining operation at the Deep Kerr deposit. These holes generated
in-fill intersections around holes K-15-49 and K-15-50 (previously
reported) and down dip from the current resource limits.
The most recent holes reported here are daughter holes that
re-entered K-15-49 and K-15-50 before being wedged into new
intercepts of the target zone. These new holes are shallower
intersections of the high-grade west limb of Deep Kerr and confirm
the continuity of that zone between the existing resource and
deeper intersections in holes drilled earlier this year.
K-15-49B was designed to penetrate the zone about 200 meters north
of K-15-49 and roughly 200 meters above that hole. K-15-50A
was drilled on the same section as K-15-50 and encountered the
target zone about 250 meters higher than the earlier hole. (See
http://seabridgegold.net/pdf/NNov3-15-maps.pdf.)
The five drill holes completed into the west part of the Deep
Kerr deposit this year were designed to establish dip continuity of
the high-grade west limb of Deep Kerr. Results show that the
mineralized envelope of the west limb extends more than 450 meters
along strike. Down dip, the zone shows continuity of more
than 400 meters with grades and widths improving at depth. The
shape of this zone continues to be highly favorable to underground
bulk mining as it grows in size. The zone remains open along strike
and at depth and future drill tests are expected to extend it
further. However, the current focus is to better understand the
evident improvement of grade at depth so as to direct future
drilling into the highest grade material.
In the past three years, Seabridge has successfully targeted
higher grade zones beneath KSM's near-surface porphyry deposits,
resulting in the discovery of Deep Kerr and the Iron Cap Lower
Zone, two copper-rich deposits that to date have added nearly one
billion tonnes of inferred resources to the project at a higher
average grade. Furthermore, the expansion potential of the east
limb of Deep Kerr has not been evaluated but remains a high value
target. Exceptionally high grade intercepts found on the east limb
have not been followed to depth.
Seabridge Chairman and CEO Rudi
Fronk commented that "every time we drill Deep Kerr, we
increase both the mineralized material in hand and the potential
upside. This year, we achieved our aim of increasing the size and
confirming the continuity of mineralization at our proposed block
cave operation at Deep Kerr. We are confident that the results will
substantially increase resources. At the same time, we also learned
that grade increases at depth, especially for gold, and that we
still have not found the limits of the deposit. We are also
becoming more intrigued with the high grade potential of the
less-explored east limb. Our focus at the moment is on enhancing
the near-term value of KSM but the big picture continues to unfold
in a most exciting way. The more we learn about KSM, the less we
know about its limits."
The following table summarizes the significant drill hole
intersections for K-15-49B and K-15-50A.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Drill Hole
ID
|
|
Total
Depth
|
|
From
(meters)
|
|
To
(meters)
|
|
Interval
(meters)
|
|
Gold
(g/T)
|
|
Copper
%
|
|
Silver
(g/T)
|
K-15-49B
|
|
1731.4
|
|
963.5
|
|
1020.1
|
|
56.6
|
|
0.67
|
|
0.12
|
|
7.0
|
|
|
1379.0
|
|
1461.6
|
|
82.6
|
|
0.43
|
|
0.55
|
|
3.3
|
|
|
1534.5
|
|
1668.9
|
|
134.4
|
|
0.20
|
|
0.45
|
|
1.4
|
including
|
|
1574.0
|
|
1627.2
|
|
53.2
|
|
0.31
|
|
0.56
|
|
1.7
|
K-15-50A
|
|
1718.5
|
|
1246.5
|
|
1369.5
|
|
123.0
|
|
0.44
|
|
0.30
|
|
2.1
|
|
|
1452.5
|
|
1704.5
|
|
252.0
|
|
0.38
|
|
0.31
|
|
2.2
|
including
|
|
1559.3
|
|
1620.5
|
|
61.2
|
|
0.63
|
|
0.42
|
|
3.1
|
Drill holes were designed to intercept the mineralized target at
right angles to the strike of the zone and oriented using current
and historical information. The true thickness of the mineralized
zones may be refined with additional drilling but current
information indicates that the intervals reported above approximate
true thickness.
Exploration activities by Seabridge at the KSM Project are
conducted under the supervision of William
E. Threlkeld, Registered Professional Geologist, Senior Vice
President of the Company and a Qualified Person as defined by
National Instrument 43-101. Mr. Threlkeld has reviewed and approved
this news release. An ongoing and rigorous quality control/quality
assurance protocol is employed in all Seabridge drilling campaigns.
This program includes blank and reference standards, and in
addition all copper assays that exceed 0.25% Cu are re-analyzed
using ore grade analytical techniques. Cross-check analyses are
conducted at a second external laboratory on at least 10% of the
drill samples. Samples are assayed at ALS Chemex Laboratory,
Vancouver, B.C., using fire assay
atomic adsorption methods for gold and ICP methods for other
elements.
Seabridge holds a 100% interest in several North American gold
projects. The Company's principal assets are the KSM Project
located near Stewart, British
Columbia, Canada and the Courageous Lake gold project
located in Canada's Northwest Territories. For a full breakdown of
Seabridge's mineral reserves and mineral resources by category
please visit the Company's website at
http://www.seabridgegold.net/resources.php.
All reserve and resource estimates reported by the
Corporation were calculated in accordance with the Canadian
National Instrument 43-101 and the Canadian Institute of Mining and
Metallurgy Classification system. These standards differ
significantly from the requirements of the U.S. Securities and
Exchange Commission. Mineral resources which are not mineral
reserves do not have demonstrated economic viability.
This document contains "forward-looking information" within
the meaning of Canadian securities legislation and "forward-looking
statements" within the meaning of the United States Private
Securities Litigation Reform Act of 1995. This information and
these statements, referred to herein as "forward-looking
statements" are made as of the date of this document.
Forward-looking statements relate to future events or future
performance and reflect current estimates, predictions,
expectations or beliefs regarding future events and include, but
are not limited to, statements with respect to: (i) the results at
Deep Kerr being expected to add resources; (ii) the shape of Deep
Kerr continuing to be highly favorable to underground bulk mining
as it grows in size; (iii) future drill tests at the west limb of
Deep Kerr being expected to extend it further; (iv) the east limb
of the Deep Kerr deposit being a high grade potential target; (v)
current information indicating that the intervals reported
approximate true thickness; (iv) the estimated amount and grade of
mineral reserves at a deposit; (v) the estimated amount and grade
of mineral resources at the core zone deposits. Any statements that
express or involve discussions with respect to predictions,
expectations, beliefs, plans, projections, objectives or future
events or performance (often, but not always, using words or
phrases such as "expects", "anticipates", "plans", "projects",
"estimates", "envisages", "assumes", "intends", "strategy",
"potential", "appears", "goals", "objectives" or variations thereof
or stating that certain actions, events or results "may", "could",
"would", "might" or "will" be taken, occur or be achieved, or the
negative of any of these terms and similar expressions) are not
statements of historical fact and may be forward-looking
statements.
All forward-looking statements are based on Seabridge's or
its consultants' current beliefs as well as various assumptions
made by them and information currently available to them. The
principle assumptions are listed above, but others include: (i) the
presence of and continuity of metals at the Project at modeled
grades; (ii) the capacities of various machinery and equipment and
the geotechnical characteristics of the resource material and its
continuity; (iii) the availability of personnel, machinery and
equipment at estimated prices; (iv) exchange rates; (v) metals
sales prices; (vi) appropriate discount rates; (vii) tax rates and
royalty rates applicable to the proposed mining operation; (viii)
financing structure and costs; (ix) anticipated mining losses and
dilution; * metallurgical performance; (xi) reasonable contingency
requirements; (xii) success in realizing proposed operations;
(xiii) receipt of regulatory approvals on acceptable terms; and
(xiv) the negotiation of satisfactory terms with impacted First
Nations groups. Although management considers these assumptions to
be reasonable based on information currently available to it, they
may prove to be incorrect. Many forward-looking statements are made
assuming the correctness of other forward looking statements, such
as statements of net present value and internal rates of return,
which are based on most of the other forward-looking statements and
assumptions herein. The cost information is also prepared using
current values, but the time for incurring the costs will be in the
future and it is assumed costs will remain stable over the relevant
period.
By their very nature, forward-looking statements involve
inherent risks and uncertainties, both general and specific, and
risks exist that estimates, forecasts, projections and other
forward-looking statements will not be achieved or that assumptions
do not reflect future experience. We caution readers not to place
undue reliance on these forward-looking statements as a number of
important factors could cause the actual outcomes to differ
materially from the beliefs, plans, objectives, expectations,
anticipations, estimates assumptions and intentions expressed in
such forward-looking statements. These risk factors may be
generally stated as the risk that the assumptions and estimates
expressed above do not occur, but specifically include, without
limitation: risks relating to variations in the mineral content or
geotechnical characteristics within the material identified as
mineral reserves or mineral resources from that predicted;
variations in rates of recovery and extraction; developments in
world metals markets; risks relating to fluctuations in the
Canadian dollar relative to the US dollar; increases in the
estimated capital and operating costs or unanticipated costs;
difficulties attracting the necessary work force; increases in
financing costs or adverse changes to the terms of available
financing, if any; tax rates or royalties being greater than
assumed; changes in development or mining plans due to changes in
logistical, technical or other factors; changes in project
parameters as plans continue to be refined; risks relating to
receipt of regulatory approvals or settlement of an agreement with
impacted First Nations groups; the effects of competition in the
markets in which Seabridge operates; operational and infrastructure
risks and the additional risks described in Seabridge's Annual
Information Form filed with SEDAR in Canada (available at
www.sedar.com) for the year ended December 31, 2014 and in the Corporation's Annual
Report Form 40-F filed with the U.S. Securities and Exchange
Commission on EDGAR (available at
www.sec.gov/edgar.shtml). Seabridge cautions that the
foregoing list of factors that may affect future results is not
exhaustive.
When relying on our forward-looking statements to make
decisions with respect to Seabridge, investors and others should
carefully consider the foregoing factors and other uncertainties
and potential events. Seabridge does not undertake to update any
forward-looking statement, whether written or oral, that may be
made from time to time by Seabridge or on our behalf, except as
required by
law.
ON BEHALF OF THE BOARD
"Rudi Fronk"
Chairman & C.E.O.
SOURCE Seabridge Gold Inc.