VANCOUVER, BC, Oct. 23,
2024 /CNW/ - Cascadia Minerals Ltd.
("Cascadia") (TSXV: CAM) (OTCQB: CAMNF) is pleased to
provide final results of 2024 exploration work at its Catch
Property in Yukon and PIL Property
in BC. Both programs included diamond drilling as well as
prospecting and mapping, with the discovery of several new zones of
high-grade copper-silver-gold and gold-silver mineralization.
PIL Property 2024 Exploration Highlights – British Columbia
- Cascadia completed two diamond drill holes (1,759 m) at the PIL South target and a
property-wide prospecting program evaluating underexplored areas
(Figure 1);
- Prospecting at the undrilled Zeus target discovered new
high-grade copper-silver mineralization across a 400 x
300 m area and a 100 m vertical extent, with seven outcrop
samples returning over 3% copper and 100 g/t silver (Figures 2,
3);
- Highlight samples from Zeus include 12.25% copper with 0.26
g/t gold and 329 g/t silver and 7.13% copper with 0.29 g/t
gold and 247 g/t silver (Figures 2, 3);
- Prospecting at the undrilled Ben showing, 2.5 km north-west of
Zeus, identified a new 300
m long zone of copper-silver mineralization, with a
highlight sample returning 10.90% copper with 39.5 g/t gold and
2,680 g/t silver from outcrop (Figure 4);
- Prospecting on a ridge-top 500 m
east of the Atlas target returned high-grade mineralization over
100 m, including 5.64% copper with
337 g/t silver and 0.11 g/t gold (Figure 1);
- Drilling at PIL South returned broad intervals of low-grade
copper, gold, silver, molybdenum and zinc mineralization, with
copper-gold grades increasing towards the bottom of both holes
(Figures 5, 6); and
- PILS-24-006 returned 162.00 m of
0.10% copper with 0.05 g/t gold, 7.1 g/t silver, and 0.18% zinc
from 749.00 m, including an interval
which returned 1.65 m of 1.34%
copper with 0.63 g/t gold and 195.0 g/t silver (Figures 5,
6).
Catch Property 2024 Exploration Highlights – Yukon
- Cascadia completed 3,055 m of
diamond drilling at Catch in 2024, with 3 holes (1,613 m) in a Phase 1 drill program, and 2 holes
(1,442 m) in the Phase 2 program, as
well as prospecting work at the Amp zone in both phases (Figure
7);
- The Phase 1 program stepped out 315
m from 2023 discovery hole CA-23-002, with hole CA-24-006
returning 106.00 m of 0.37% copper
with 0.22 g/t gold (Figures 8, 9);
- Hole CA-24-010 in the Phase 2 program stepped out 150 m north from CA-24-006 and returned a broad
interval of copper and gold mineralization (144.00 m of 0.14% copper with 0.03 g/t gold)
(Figures 8, 9); and
- Follow-up prospecting at the Amp zone, where epithermal
mineralization returning 1,065 g/t gold with 267 g/t silver
was discovered earlier this year, returned additional high-grade
results, including 187 g/t gold with 33.9 g/t silver, and
141 g/t gold with 45.2 g/t silver, and has advanced the
target to the drill-ready stage.
"Cascadia's 2024 exploration programs were very successful in
advancing its Yukon and BC
copper-gold projects. Phase one drilling at the Catch project in
Yukon greatly expanded the Spark
zone by over 500 m in strike length
and over 500 m in vertical extent,
while prospecting at the undrilled Amp zone, 1 km north of Spark,
returned four >1 oz/t gold samples, including a 1,065 g/t gold
and 267 g/t silver sample from outcrop. Although phase two drilling
at Spark intersected lower grade mineralization in the last two
step-out holes, mineralization remains open in multiple directions.
We are in the early days of testing one of many targets along a 5
km long trend of mineralization, with priority drill targets at the
Amp and Volt zones, as well as stepping out to the west, north and
south at the Spark zone," stated Cascadia's president and CEO,
Graham Downs.
"Exploration at the PIL project in BC also proved very
successful, highlighted by the discovery of the Zeus target, which
hosts a drill ready zone of high-grade copper-silver-gold
mineralization in outcrop measuring approximately 400 x
300 m across a vertical extent of
over 100 m. While drilling at PIL
south encountered broad intervals of epithermal mineralization,
results suggest we are still distal from a porphyry. We are eager
to drill-test the Zeus target and other zones of at-surface
high-grade copper-silver-gold mineralization, while we continue to
refine our understanding of PIL South and other porphyry targets on
the property."
Figure 1 – PIL Property Highlights
Figure 2 – Zeus Zone Map
Figure 3 – Zeus Zone Annotated Photo
Figure 4 – Ben Zone Map
Figure 5 – PIL South Drill Map
Figure 6 – PIL South Cross-Section
Figure 7 – Catch Property Highlights
Figure 8 – Spark Drill Map
Figure 9 – Spark Zone Long Section
PIL Property Exploration, BC
Cascadia's 2024 exploration program at the PIL Property included
its inaugural diamond drill campaign, with two holes completed at
the PIL South target, as well as comprehensive prospecting across
the 131 km2 property. The prospecting program collected
408 rock samples and yielded high-grade copper, gold, silver,
molybdenum, lead and zinc assays from a variety of targets.
Prospecting resulted in the expansion of existing targets and the
discovery of extensive areas of new mineralization at the Zeus and
Ben targets, as well as on a ridge between Atlas and Copper Cliff.
The Zeus zone is a newly discovered area of widespread
copper-silver ± gold mineralization, located 1.5 km south of the
Copper Ridge target. The target was first identified by a rock
sample collected in 2022 which returned 3.44% copper with 210 g/t
silver and 1.13 g/t gold. Crews followed up on this result and
collected an additional 85 rock samples. Seven outcrop samples
returned over 3% copper with over 100 g/t silver, as well as
variable amounts of gold. This sampling has now defined
high-grade copper-silver ± gold mineralization in outcrop across
a 400 x 300 m area, and a
100 m vertical extent.
Mineralization appears to consist of stacked
quartz-chalcopyrite-magnetite veins with a consistent north-south
orientation. Zeus is drill ready and will be a priority for
2025.
The Ben zone is a historical Minfile occurrence located 2.5 km
northwest of the Zeus zone. Crews followed-up on a 2003 sample that
returned elevated gold, silver and copper, and collected nine
samples in the area. A highlight sample returned 10.90% copper
with 39.5 g/t gold, and 2,680 g/t silver from outcrop.
Six samples returned greater than 100 g/t silver, five returned
greater than 1% copper, and four greater than 1 g/t gold, defining
mineralization in outcrop across a 300
m long area.
Follow-up work on a ridge-top between the Atlas and Copper Cliff targets identified high-grade
copper-silver mineralization in outcrop, with a highlight sample
returning 5.64% copper, 337 g/t silver, and 0.11 g/t
gold.
A total of 1,759 m of diamond
drilling was completed at PIL South in two holes targeting an
induced polarization chargeability target at depth. Both holes
intersected a high abundance of sulphide minerals throughout, with
broad intervals of low-grade copper, gold, silver, molybdenum, and
zinc. Both holes returned increasing copper-gold grades towards the
end of hole, suggesting the porphyry target may lie deeper than
tested.
Hole PILS-24-006 returned 162.00 m
of 0.10% copper with 0.05 g/t gold, 7.1 g/t silver, and 0.18% zinc
from 749.00 m, including an interval
which returned 1.65 m of 1.34%
copper with 0.63 g/t gold and 195.0 g/t silver from
837.35 m. Hole PILS-24-005 returned
121.57 m of 0.10% copper with 0.03
g/t gold, 4.0 g/t silver, 11.6 ppm molybdenum and 0.39% zinc from
463.31 m. The
copper-gold-silver-molybdenum-zinc mineralization observed in holes
5 and 6 is dominantly associated with propylitic to phyllic altered
basalts of intermediate sulphidation epithermal origin and
additional drilling is required to vector into the causative
porphyry source.
Table 1: 2024 PIL Drilling Highlights
Drill
Hole
|
From
(m)
|
To
(m)
|
Interval
(m)*
|
Copper
(%)
|
Gold
(g/t)
|
Silver
(g/t)
|
Molybdenum
(ppm)
|
Zinc
(%)
|
CuEq**
(%)
|
PILS-24-005
|
188.00
|
230.00
|
42.00
|
0.05
|
0.10
|
5.0
|
9.6
|
0.28
|
0.16
|
and
|
463.31
|
584.88
|
121.57
|
0.10
|
0.03
|
4.0
|
11.6
|
0.39
|
0.15
|
and
|
758.00
|
785.00
|
27.00
|
0.08
|
0.12
|
9.7
|
5.7
|
0.75
|
0.24
|
PILS-24-006
|
386.27
|
407.00
|
20.73
|
0.13
|
0.16
|
6.2
|
25.9
|
0.64
|
0.29
|
and
|
749.00
|
911.00
|
162.00
|
0.10
|
0.05
|
7.1
|
5.9
|
0.18
|
0.19
|
incl.
|
821.00
|
896.00
|
75.00
|
0.15
|
0.09
|
12.3
|
7.8
|
0.24
|
0.32
|
and
incl.
|
837.35
|
839.00
|
1.65
|
1.34
|
0.63
|
195.0
|
9.8
|
0.20
|
3.43
|
*
|
The reported intervals
are drilled thicknesses and true widths are unknown.
|
**
|
Copper Equivalent
(CuEq) calculations use metal prices of US$3.75/lb for copper,
US$1,950/oz for gold and US$25/oz for silver. Recovery factors of
85% for copper, 75% for gold and 75% for silver were used based on
a review of similar projects, as no metallurgical data has been
collected for PIL. Molybdenum and zinc were not used in the CuEq
calculation.
|
Catch Property Exploration, Yukon
Cascadia's 2024 exploration program at the Catch property was
conducted in two phases, with three holes (1,613 m) drilled in the first phase, and two
holes (1,442 m) drilled in the
second. Prospecting was also conducted at the Amp zone, where
high-grade gold-silver epithermal mineralization was discovered
earlier this season, including a sample which returned 1,065 g/t
gold with 267 g/t silver from outcrop. For more details on
phase one work, see Cascadia's news releases dated July 22nd and 25th,
2024.
The phase two prospecting program focused on collecting
additional samples and structural data at the Amp zone necessary to
prepare for drilling in 2025. Crews collected a further 11 samples
in the area around the high-grade discovery, with one returning
187 g/t gold with 33.9 g/t silver, and another returning
141 g/t gold with 45.2 g/t silver. Three more samples
returned between 4.05 g/t gold and 9.24 g/t gold. Crews identified
a conjugate set of quartz-calcite veins related to the gold-silver
mineralization and collected numerous structural measurements to
advance the target to the drill-ready stage.
Additional mapping of the Volt zone resulted in a
reinterpretation of the potential source of the largest area of
surface copper-gold mineralization on the Catch Property,
suggesting the bedrock source of the mineralization may occur at a
magnetic high target approximately 400
m southeast or up-ice from the 2023 drill holes. The Volt
Zone has an average rock grade of 0.32% copper with 0.70 g/ t gold
in 258 rocks collected at surface in float over a 500 x
500 m area. The Volt zone remains a
top priority drill target for 2025.
The phase two program included drilling two additional step-out
holes at the Spark zone. Hole CA-24-009 stepped out a further
380 m east from CA-24-006, testing a
potential extension of mineralization in this direction. The hole
returned several intervals of anomalous gold, including
26.36 m of 0.16 g/t gold with 0.05%
copper from 237.27 m.
Hole CA-24-010 stepped out 150 m
north of CA-24-006 and returned a broad interval of copper and gold
mineralization (144.00 m of 0.14%
copper with 0.03 g/t gold from 454
m).
While the results of these two holes limit the potential for
expansion to the east, the Spark zone remains open to the north,
west, south and at depth. Significant intervals of potassic
alteration have yet to be encountered and future drilling will
continue to vector towards the core of the system. Additional
petrographic and hyperspectral work will be undertaken over the
winter and will aid in vectoring for the 2025 field season.
Table 2: 2024 Catch Drilling Highlights
Drill
Hole
|
From
(m)
|
To
(m)
|
Interval
(m)*
|
Copper
(%)
|
Gold
(g/t)
|
CuEq**
|
CA-24-006
|
252.00
|
429.00
|
177.00
|
0.25
|
0.14
|
0.34
|
incl.
|
309.00
|
415.00
|
106.00
|
0.37
|
0.22
|
0.52
|
and
incl.
|
352.00
|
358.55
|
6.55
|
0.67
|
0.87
|
1.25
|
CA-24-007
|
51.15
|
630.00
|
578.85
|
0.10
|
0.01
|
0.11
|
incl.
|
524.00
|
627.00
|
103.00
|
0.22
|
0.04
|
0.25
|
CA-24-008
|
195.95
|
413.00
|
217.05
|
0.10
|
0.02
|
0.11
|
incl.
|
195.95
|
226.95
|
31.00
|
0.25
|
0.02
|
0.26
|
CA-24-009
|
237.27
|
263.63
|
26.36
|
0.05
|
0.16
|
0.16
|
CA-24-010
|
250.00
|
267.36
|
17.36
|
0.45
|
0.04
|
0.48
|
and
|
454.00
|
598.00
|
144.00
|
0.14
|
0.03
|
0.16
|
*
|
The reported
intervals are drilled thicknesses and true widths are
unknown.
|
**
|
Copper Equivalent
(CuEq) calculations use metal prices of US$3.75/lb for copper and
US$1,950/oz for gold. Recoveries factors of 85% for copper and 75%
for gold were used based on a review of similar projects, as no
metallurgical data has been collected for Catch.
|
QA/QC
Analytical work was completed by ALS Canada Ltd, with sample
preparation in Whitehorse,
Yukon, Kamloops, BC, and Langley, BC and geochemical analyses in
North Vancouver, BC. Core samples
were fine crushed before a 250-gram split was pulverized to better
than 85% passing 75 microns. Gold was determined for Catch samples
by the Au-AA24 procedure which involves fire assay preparation
using a 50-gram charge with an inductively coupled plasma-atomic
emission spectroscopy finish ("ICP-AES"). Gold was determined for
PIL samples by the Au-AA23 procedure which involves fire assay
preparation using a 30-gram charge with an ICP-AES finish.
Multi-element data for 48 elements was determined for all samples
by the ME-MS61 procedure, which involves a four-acid digestion
followed by ICP-AES and inductively coupled plasma-mass
spectrometry.
Overlimit values for gold were determined by the Au-GRA21
procedure which involves fire assay preparation using a 30-gram
charge with a gravimetric finish. Overlimit values for copper,
silver, lead and zinc were determined by the ME-OG62 procedure
which involves a four-acid digestion followed by ICP-AES analysis.
Further overlimit values for silver were determined by the Ag-GRA21
procedure which involves fire assay preparation using a 30-gram
charge with a gravimetric finish.
Rigorous procedures are in place regarding sample collection,
chain of custody and data entry. Certified assay standards,
duplicate samples and blanks are routinely inserted into the sample
stream of diamond drill samples to ensure integrity of the assay
process. All diamond drill samples included in this news release
have passed the QA/QC procedures as described above. All assay
intervals presented in this news release are uncut. Core was
sampled using a diamond saw, with half of each interval sent to the
lab for analysis, and the other half retained.
Results referenced in this release represent highlight results
only. Below detection values for gold, copper, silver, molybdenum,
lead and zinc have been encountered in drilling, rock and soil
samples in these target areas.
The technical information in this news release has been approved
by Adam Coulter, M.Sc., P.Geo., VP
Exploration for Cascadia and a qualified person for the purposes of
National Instrument 43-101.
About Cascadia
Cascadia is a Canadian junior mining company focused on making
new copper and gold discoveries the Yukon and British
Columbia. Cascadia's Catch Property in the Yukon hosts a brand-new copper-gold porphyry
discovery where inaugural drill results returned broad intervals of
mineralization, including 116.60 m of
0.31% copper with 0.30 g/t gold. Catch exhibits extensive
high-grade copper and gold mineralization across a 5 km long trend,
with rock samples including 3.88% copper with 30.0 g/t gold and
1,065 g/t gold with 267 g/t silver.
In addition to Catch, Cascadia is exploring the PIL Property in
the Toodoggone region of British
Columbia, which hosts numerous porphyry copper-gold and
epithermal gold targets. Multiple high-grade showings at PIL have
yet to be drilled, with rock samples including 12.25% copper with
329 g/t silver at the Zeus zone, 10.90% copper with 39.5 g/t gold
and 2,680 g/t silver at the Ben zone, and 489.71 g/t gold with
6,514 g/t silver at the Atlas zone. Work is also ongoing at the
Mack's Copper and Milner properties – recently staked Catch
analogues within Yukon's Stikine
Terrane – as well as the Sands of Time property in the Yukon, all of which have additional copper
porphyry targets. Cascadia has approximately 53 million shares
outstanding and its largest shareholders are Hecla Mining Company,
Michael Gentile and Barrick Gold.
On behalf of Cascadia Minerals Ltd.
Graham Downs, President and
CEO
NEITHER THE TSX VENTURE EXCHANGE NOR ITS
REGULATION SERVICES PROVIDER (AS THAT TERM IS DEFINED IN THE
POLICIES OF THE TSX VENTURE EXCHANGE) ACCEPTS RESPONSIBILITY FOR
THE ADEQUACY OR ACCURACY OF THIS NEWS RELEASE.
Cautionary note regarding forward-looking statements:
This press release may contain "forward-looking information"
within the meaning of applicable securities laws. Readers are
cautioned to not place undue reliance on forward-looking
information. Actual results and developments may differ
materially from those contemplated by these statements. The
statements in this press release are made as of the date of this
press release. The Company undertakes no obligation to update
forward-looking information, except as required by securities
laws.
SOURCE Cascadia Minerals Ltd.