Claim Post Resources Inc. Announces SGS Lakefield Testwork Generates 99.3 Percent Pure Silica Sand
May 15 2014 - 11:53AM
Marketwired
Claim Post Resources Inc. Announces SGS Lakefield Testwork
Generates 99.3 Percent Pure Silica Sand
TORONTO, ONTARIO--(Marketwired - May 15, 2014) - Claim Post
Resources Inc. (TSX-VENTURE:CPS) ("Claim Post" or the "Company")
announces that SGS Mineral Services of Lakefield, Ontario has
successfully produced 99.3% pure silica sand from the Seymourville
sand deposit. This high grade silica sand deposit is located 200 km
north-east of Winnipeg, Manitoba just off of paved Highway 304 on
the east shore of Lake Winnipeg (the "Seymourville Deposit").
The Seymourville Deposit is being evaluated for use as a natural
sand proppant (frac sand) for the oil and gas industry. As part of
Claim Post's plan to advance the Seymourville Frac Sand Project to
production, 1000 kilograms of sand was delivered to the SGS Lab in
Lakefield, Ontario from secure storage in Winnipeg. The sand from
20 sonic drill holes drilled at mainly 100m x 100m centers was
composited into a representative sample for bench scale
metallurgical testwork.
The current SGS metallurgical program was designed to obtain the
following technical data:
- The average bulk density of the clay-silica mixture for NI
43-101 Report tonnage calculations was calculated to be 1.73.
P&E Mining Consultants Inc. has estimated the Seymourville
Project Inferred Resource at 15 million cubic meters or 25 million
tonnes at a bulk density of 1.73 over approximately 20% of the
project area. (April 29th, 2014 Press Release filed on SEDAR.)
- The SGS testwork was structured to give technical information
to confirm the preliminary design of the frac sand processing
plant. This testwork includes scrubbing times to remove clay,
microscope evaluation of how clean the sand is for various size
ranges, magnetic separation, detailed assaying etc. The screen
analysis of the bulk sample gives an estimation of the tonnage
split of sand into each of the frac sand size ranges.
The SGS testwork has shown that we can design a processing
circuit that can consistently make a plus 99% pure silica sand that
can be screened into standard frac sand size ranges. Claim Post
expected that most of the finer material to be mainly clays which
would be a challenge to dewater for dry disposal back into the
mined out pits. There is 5% or less clay in the composite sample.
The remaining 10% is fine to ultrafine silica sand that may be wet
processed into saleable products without the capital, operating or
environmental costs associated with fine or ultrafine grinding.
The table below shows that 83% of the sand/clay feed to the
processing plant can be processed into frac sand size ranges. Fine
grained silica products sell for at least as much as frac sand thus
additional SGS testwork will be done to evaluate these
products.
SGS Screen Analysis |
Percentage |
20-40 Mesh |
10% |
40-70 Mesh |
38% |
70-140 Mesh |
35% |
140-325 Mesh Si02 |
5% |
Minus 325 Mesh SiO2 |
5% |
Kaolinite, clays etc. |
5% |
Magnetics |
2% |
|
|
Total |
100% |
- Once the initial SGS testwork and the flow sheet is finalized
in the coming weeks a number of 1kg samples for each frac sand size
range will be made; 20/40, 30/50, 40/70 and 70/140 mesh etc. which
will be sent to the PropTester laboratory in Texas for API ISO
testwork. The remainder of the sand will be scrubbed and screened
at SGS ultimately becoming 1kg samples for marketing frac sand to
the oil and gas companies.
The President of Claim Post, Charles Gryba, stated: "We are
concentrating on moving the project forward to production and
de-risking the project in cost effective steps. The current SGS
testwork indicates we can produce sand grading 99.3% SiO2 or better
which is the basis of a premium Tier 1 Frac Sand. Initial API
testwork by PropTester for Gossan Resources Inc. meet all API
Specifications but we will independently confirm the API results
using the SGS cleaned sand."
The market for natural frac sand continues to grow at a high
rate in North America (approximately 35% per annum) with production
reaching about 42,000,000 tons in the US in 2013 and an additional
Canadian domestic production of about 2,500,000 tonnes. Claim
Post's Seymourville Frac Sand Deposit is approximately 1,000 km
closer to the Canadian market than Wisconsin sand deposits; this
indicates the potential for significant transportation savings in
addition to the Canadian dollar differential.
Claim Post is evaluating a transload facility at the Centre Port
site in Winnipeg which will provide unit train loading with access
to CN, CPR and the BNSF railroads. In addition Claim Post will
provide bulk truck or container service to the oil industry in
Manitoba, Saskatchewan and the U.S. side of the Williston Basin.
Containers delivered to the well site are very economic within a
600 km range from the Winnipeg transload facility.
Charles M. Gryba P.Eng is the Company Qualified Person for this
press release.
Claim Post Resources Inc. is a Canadian based mineral
exploration company and a reporting issuer in Ontario, Alberta and
British Columbia. The Company is focused on becoming a leading
provider of premium white silica sand proppant to oil operations in
the Williston Basin (both the Canadian and U.S. sides of the
Border), and to the oil and natural gas plays in the Western
Canadian Sedimentary Basin from its Seymourville Frac Sand Project,
located 200 km northeast of Winnipeg, Manitoba. There are
96,452,164 common shares of the Company currently issued and
outstanding.
Statements in this release that are forward-looking reflect
the Company's current views and expectations with respect to its
performance, business, and future events. Such statements are
subject to various risks and assumptions, some, but not necessarily
all, are disclosed elsewhere in the Company's periodic filings with
Canadian securities regulators. Such statements and information
contained herein represent management's best judgment as of the
date hereof based on the information currently available; however
actual results and events may vary significantly.
The Company does not assume the obligation to update any
forward-looking statement. Neither TSX Venture Exchange nor its
Regulation Services Provider (as that term is defined in the
policies of the TSX Venture Exchange) accepts responsibility for
the accuracy of this release.
Claim Post Resources Inc.Charles GrybaPresident and
Director416-801-6366Claim Post Resources Inc.Peter GrybaCorporate
Affairs416-203-3776www.claimpostresources.com
Canadian Premium Sands (TSXV:CPS)
Historical Stock Chart
From Nov 2024 to Dec 2024
Canadian Premium Sands (TSXV:CPS)
Historical Stock Chart
From Dec 2023 to Dec 2024