CONFIRMS CONTINUITY OF HIGH-GRADE RUTH VEIN
OVER 650 METERS & REMAINS OPEN FOR 2KMS PARALLEL TO THE
MOSS OPEN PIT
VANCOUVER, BC, Oct. 15, 2020 /CNW/ - Northern Vertex
Mining Corp. (TSXV: NEE) (OTC Nasdaq Intl.: NHVCF) (the
"Company" or "Northern Vertex") is pleased to announce
additional high-grade gold and silver drill results have been
received from its multi-phase resource expansion
program (the "Program") at the Moss Mine, located in
NW Arizona. Most notable results
from this round of drilling include:
- Strike length of Ruth Vein extended for 150 meters and the
drilling continues to confirm continuity of mineralization for +650
meters with potential for high-grade ore shoots running parallel to
our producing Moss Mine Central Pit.
- Drilling discovered an unexpectedly thick stockwork
mineralized area surrounding the Ruth Vein; specifically hole
AR20-315R returning an interval of 109.8 meters from 184.5 meters
to the bottom of the hole @ 0.79 gpt gold and 24.40 gpt silver
including intervals of 15.25 meters of 1.75 gpt gold and 41.10 gpt
silver and 15.25 meters @ 1.85 gpt gold and 85.10 gpt silver.
- Two RC drill rigs are currently supporting the multi-phased
exploration and resource expansion program.
- Ruth Vein high-grade intercepts are typical of mineralized
shoots mined in the Oatman
District.
Ken Berry, President & CEO
stated: "In addition to the success of high-grade gold and
silver results from the previously untested Ruth Vein, we are
extremely encouraged with the widespread mineralized intercepts
encountered at the Gold Bridge and
the Gold Tower zones, located directly adjacent to the producing
Moss open pit mine. The recent success of our current drill program
supports our objective to significantly expand the Moss Mine
resource base. The positive drill results achieved from the Ruth
Vein and its proximity to the Moss Vein open pit makes it an
important target for further testing the possibility of additional
resources, pit expansion and mine life extension."
Ruth Vein Drilling
The Ruth Vein strikes subparallel to the Moss Vein, dips to the
north into the south-dipping Moss Vein and crops out approximately
150 meters south of the active Center Pit. Click the link to view a
plan map showing the location of the Ruth Vein (figure 1).
Recent drilling of the Ruth vein has focused on following up
high-grade vein intercepts in holes AR20-286R and
AR20-313R (see news release dated September 9, 2020); increasing the known strike
length and confirming continuity of mineralization along strike and
down dip of the vein. Drilling has now intersected the Ruth Vein
over a strike length of approximately 650 meters; and the
vein remains open both to the east and to the west. In
addition to confirming continuity of narrow high-grade gold and
silver mineralization in the vein as evident in holes
AR20-312R returning 6.1m @
5.18 gpt gold, 37.4 gpt silver at 94.6m and AR20-306R returning 4.6m @ 5.62 gpt gold, 57.6 gpt silver at
89.9 m; recent drilling has
unexpectedly discovered thick stockwork mineralization surrounding
the Ruth Vein in many places. Hole AR20-307R
intersected 22.9m @ 1.107 gpt gold
and 14.9 gpt silver surrounding a suspected stope mined through the
vein, and hole AR20-310R drilled 18.3m @ 1.02 gpt gold and 26.5 gpt silver.
Intersection of the Ruth and Moss veins was tested by hole
AR20-315R, which drilled the Ruth Vein approximately 185 meters
beneath the surface and then intersected the Moss Vein at
approximately 274 meters down hole. Here, very thick zone of quartz
stockwork veining was encountered between the two veins and
intercepted:
- 109.8 meters (from 184.5m to
294.3m) @ 0.79 gpt gold and 24.41 gpt
silver
-
- including 15.25m (from
196.7m to 212.0m) @ 1.75 gpt gold and 41.10 gpt silver
- and including 15.25m (from
274.5m to 289.8m) @ 1.85 gpt gold and 85.10 gpt silver
Click the link to view a cross section of hole AR20-315R
(figure 2).
A north-south fence of drill holes AR20-315R, AR20-314R and
AR20-313R demonstrate continuity of gold-silver mineralization
along a down-dip length of approximately 274 meters on the Ruth
Vein from the surface to the Moss Vein intersection.
Internal modelling indicates the intersection between the Moss
Vein and the Ruth Vein may become shallower on strike to the
east. Additional drilling is underway to target the untested
intersection along strike. Discovery of thick mineralization along
this extensive zone of structural preparation could lead to a
future expansion of the Moss open pit mine to depth.
Ruth Vein Extensions
The Ruth Vein out-crop can only be traced on surface for about
170 meters along strike, however scattered historic prospect pits
have exposed veining for another 320 meters to the west. Similar
scattered vein exposures could be followed for about 220 meters to
the east, giving the vein a surface expression of approximately 710
meters. A north-dipping vein in the hanging wall of the Moss Vein
outcrops on surface east of the current pit limit, roughly one
kilometer farther east of the last indication of the Ruth Vein, and
extends for a minimum of 250 meters to the east. This vein is
similar to the Ruth vein in width, texture, orientation, and
position relative to the Moss vein. The area between the two veins
is characterized by scattered veins and stockworks and likely
correlates with the Ruth vein. As a result, this vein has been
named the East Ruth Vein.
Gold Tower
The Gold Tower target consists of a broad zone of stockwork
veining south and west of, the West pit, which is currently being
pioneered and expected to deliver ore in mid-October. Recent
drilling at Gold Tower has extended stockwork mineralization
further to the south and west, with several thick zones intersected
in many holes, including AR20-300R, which returned:
- 48.8 meters (from 38.1 to 86.9 meters) @ 0.74 gpt gold &
4.19 gpt silver
-
- Including 7.6 meters (from 74.7 to 82.4 meters) @ 1.36 gpt gold
& 5.56 gpt silver
- And 35.0 meters (from 161.7 to 196.7 meters) @ 0.59 gpt gold
& 11.37 gpt silver
-
- Including 4.5 meters (from 192.2 to 196.7 meters) @ 2.84 gpt
gold & 48.73 gpt silver
In addition to the stockwork mineralization, some higher-grade
veins have been drilled within the stockwork, such as
AR20-293R, containing a vein assaying 9.15m @ 2.40 gpt gold and 2.78 gpt silver.
The Company continues to evaluate recent assay results received
for the 15 holes, including 10 from the Gold Tower area and 5 holes
from the Ruth Vein area, while refining the mineralization models.
Drilling remains ongoing with two reverse circulation drill rigs
focusing on the expansion of the Ruth Vein, stepping-out to the
east and in-filling on-strike and down-dip.
Detailed Drill Results
Location
|
Hole
ID
|
Azimuth
|
Dip
|
From
(m)
|
To
(m)
|
From
(ft)
|
To
(ft)
|
Length
(m)
|
Length
(ft)
|
Au
(g/t)
|
Ag
(g/t)
|
Ruth
|
AR20-306R
|
180
|
-45
|
35.08
|
45.75
|
115
|
150
|
10.68
|
35
|
2.664
|
5.557
|
including
|
|
|
38.13
|
44.23
|
125
|
145
|
6.10
|
20
|
4.258
|
8.7
|
and
|
|
|
88.45
|
97.60
|
290
|
320
|
9.15
|
30
|
2.964
|
29.917
|
including
|
|
|
89.98
|
94.55
|
295
|
310
|
4.58
|
15
|
5.62
|
57.567
|
AR20-307R
|
180
|
-65
|
0.00
|
7.63
|
0
|
25
|
7.63
|
25
|
0.354
|
1.7
|
and
|
|
|
103.70
|
126.58
|
340
|
415
|
22.88
|
75
|
1.107
|
14.9
|
including
|
|
|
109.80
|
120.48
|
360
|
395
|
10.68
|
35
|
1.815
|
29.1
|
and
|
|
|
141.83
|
150.98
|
465
|
495
|
9.15
|
30
|
0.35
|
4.5
|
AR20-310R
|
180
|
-88
|
106.8
|
111.3
|
350
|
365
|
4.6
|
15
|
0.53
|
2.37
|
|
|
|
172.3
|
190.6
|
565
|
625
|
18.3
|
60
|
1.02
|
26.45
|
including
|
|
|
175.4
|
183.0
|
575
|
600
|
7.6
|
25
|
1.97
|
57.04
|
|
|
|
207.4
|
233.3
|
680
|
765
|
25.9
|
85
|
0.46
|
12.87
|
including
|
|
|
207.4
|
213.5
|
680
|
700
|
6.1
|
20
|
1.18
|
27.13
|
AR20-311R
|
180
|
-70
|
125.1
|
131.2
|
410
|
430
|
6.1
|
20
|
0.63
|
11.23
|
AR20-312R
|
180
|
-45
|
94.6
|
100.7
|
310
|
330
|
6.1
|
20
|
5.18
|
37.35
|
AR20-314R
|
180
|
-65
|
134.2
|
149.5
|
440
|
490
|
15.3
|
50
|
0.83
|
18.29
|
including
|
|
|
134.20
|
140.30
|
440
|
460
|
6.10
|
20
|
1.55
|
21.85
|
AR20-315R
|
180
|
-85
|
184.53
|
294.33
|
605
|
965
|
109.80
|
360
|
0.79
|
24.41
|
including
|
|
|
196.73
|
211.98
|
645
|
695
|
15.25
|
50
|
1.75
|
41.10
|
and
including
|
|
|
274.50
|
289.75
|
900
|
950
|
15.25
|
50
|
1.85
|
85.10
|
AR20-316R
|
185
|
-50
|
56.43
|
77.78
|
185
|
255
|
21.35
|
70
|
0.43
|
2.04
|
including
|
|
|
56.43
|
59.48
|
185
|
195
|
3.05
|
10
|
0.92
|
4.40
|
and
including
|
|
|
64.05
|
67.10
|
210
|
220
|
3.05
|
10
|
0.67
|
7.05
|
and
including
|
|
|
73.20
|
76.25
|
240
|
250
|
3.05
|
10
|
0.75
|
0.30
|
AR20-317R
|
150
|
-45
|
65.58
|
77.78
|
215
|
255
|
12.20
|
40
|
0.44
|
0.74
|
AR20-318R
|
140
|
-70
|
64.05
|
67.10
|
210
|
220
|
3.05
|
10
|
1.48
|
0.55
|
Gold Tower
|
AR20-290R
|
185
|
-45
|
33.6
|
62.5
|
110
|
205
|
29.0
|
95
|
0.43
|
0.23
|
including
|
|
|
44.2
|
51.9
|
145
|
170
|
7.6
|
25
|
0.67
|
0.24
|
AR20-293R
|
50
|
-55
|
28.98
|
38.13
|
95
|
125
|
9.15
|
30
|
2.40
|
2.78
|
|
|
|
47.28
|
57.95
|
155
|
190
|
10.68
|
35
|
0.69
|
3.26
|
|
|
|
68.63
|
71.68
|
225
|
235
|
3.05
|
10
|
0.43
|
1.65
|
|
|
|
122.00
|
132.68
|
400
|
435
|
10.68
|
35
|
0.27
|
1.34
|
AR20-294R
|
100
|
-45
|
4.6
|
12.2
|
15
|
40
|
7.6
|
25
|
1.18
|
0.92
|
and
|
|
|
29.0
|
48.8
|
95
|
160
|
19.8
|
65
|
0.28
|
0.40
|
AR20-295R
|
315
|
-45
|
65.6
|
70.2
|
215
|
230
|
4.6
|
15
|
0.42
|
1.07
|
AR20-296R
|
215
|
-45
|
22.9
|
39.7
|
75
|
130
|
16.8
|
55
|
0.59
|
1.25
|
including
|
|
|
33.6
|
36.6
|
110
|
120
|
3.1
|
10
|
2.03
|
1.50
|
and
|
|
|
67.1
|
70.2
|
220
|
230
|
3.1
|
10
|
0.60
|
1.35
|
and
|
|
|
86.9
|
99.1
|
285
|
325
|
12.2
|
40
|
0.29
|
0.78
|
AR20-297R
|
185
|
-45
|
10.7
|
25.9
|
35
|
85
|
15.3
|
50
|
0.29
|
0.88
|
and
|
|
|
58.0
|
80.8
|
190
|
265
|
22.9
|
75
|
0.55
|
0.79
|
including
|
|
|
61.0
|
68.6
|
200
|
225
|
7.6
|
25
|
1.00
|
1.06
|
AR20-298R
|
40
|
-75
|
29.0
|
32.0
|
95
|
105
|
3.1
|
10
|
0.67
|
1.85
|
and
|
|
|
41.2
|
53.4
|
135
|
175
|
12.2
|
40
|
0.59
|
9.36
|
and
|
|
|
67.1
|
77.8
|
220
|
255
|
10.7
|
35
|
0.31
|
11.84
|
and
|
|
|
100.7
|
105.2
|
330
|
345
|
4.6
|
15
|
0.43
|
4.60
|
and
|
|
|
120.5
|
129.6
|
395
|
425
|
9.2
|
30
|
0.42
|
22.78
|
and
|
|
|
181.5
|
187.6
|
595
|
615
|
6.1
|
20
|
0.55
|
6.53
|
and
|
|
|
204.4
|
207.4
|
670
|
680
|
3.1
|
10
|
0.59
|
1.90
|
AR20-299R
|
355
|
-80
|
4.6
|
10.7
|
15
|
35
|
6.1
|
20
|
0.38
|
0.53
|
and
|
|
|
30.5
|
157.1
|
100
|
515
|
126.6
|
415
|
0.37
|
10.39
|
including
|
|
|
44.2
|
64.1
|
145
|
210
|
19.8
|
65
|
0.65
|
8.28
|
and
including
|
|
|
114.4
|
123.5
|
375
|
405
|
9.1
|
30
|
0.65
|
40.63
|
and
|
|
|
176.9
|
181.5
|
580
|
595
|
4.6
|
15
|
0.43
|
14.10
|
and
|
|
|
198.3
|
201.3
|
650
|
660
|
3.0
|
10
|
0.68
|
14.10
|
and
|
|
|
216.6
|
225.7
|
710
|
740
|
9.2
|
30
|
0.44
|
1.65
|
AR20-300R
|
285
|
-55
|
12.2
|
15.3
|
40
|
50
|
3.1
|
10
|
0.73
|
2.50
|
and
|
|
|
38.1
|
86.9
|
125
|
285
|
48.8
|
160
|
0.74
|
4.19
|
including
|
|
|
74.7
|
82.4
|
245
|
270
|
7.6
|
25
|
1.36
|
5.56
|
and
|
|
|
131.2
|
134.2
|
430
|
440
|
3.0
|
10
|
0.61
|
25.75
|
and
|
|
|
161.7
|
196.7
|
530
|
645
|
35.1
|
115
|
0.59
|
11.37
|
including
|
|
|
192.2
|
196.7
|
630
|
645
|
4.6
|
15
|
2.84
|
48.73
|
and
|
|
|
204.4
|
213.5
|
670
|
700
|
9.2
|
30
|
0.37
|
4.60
|
AR20-301R
|
248
|
-45
|
30.5
|
41.2
|
100
|
135
|
10.7
|
35
|
0.37
|
1.74
|
and
|
|
|
96.1
|
128.1
|
315
|
420
|
32.0
|
105
|
0.45
|
1.70
|
AR20-304R
|
185
|
-45
|
39.7
|
45.8
|
130
|
150
|
6.1
|
20
|
1.13
|
0.98
|
AR20-305R
|
215
|
-45
|
16.8
|
22.9
|
55
|
75
|
6.1
|
20
|
0.28
|
0.35
|
and
|
|
|
42.7
|
58.0
|
140
|
190
|
15.3
|
50
|
0.96
|
1.37
|
including
|
|
|
45.8
|
53.4
|
150
|
175
|
7.6
|
25
|
1.72
|
2.16
|
and
|
|
|
111.3
|
117.4
|
365
|
385
|
6.1
|
20
|
0.83
|
0.83
|
QA/QC
Samples of drill cuttings were
collected by the drilling crew using a wet rotary splitter to
ensure a representative sample of each five-foot interval. Field
notes were recorded for each sample documenting what was sampled
and how the sample was taken. Samples were collected in bags with a
sample tag inserted and delivered to a secure on-site location
prior to pick-up by Skyline Labs, a commercial laboratory in
Tucson, Arizona. Skyline Labs is
an ISO 9001:2008 qualified assay lab that uses and makes available
internal assaying controls. Quality control consisted of one
certified gold standard, one blank, and one duplicate sample
inserted into every 20 samples submitted to Skyline
Laboratories.
At the lab, rock samples are dried, crushed and pulverized to
85% passing through a 200-mesh sieve. The pulps are assayed for
gold using a 30 g split, Fire Assay (FA) and Atomic Absorption (AA)
finish. Over limit assays for both gold and silver (10 gpt for gold
and 100 gpt for silver) were rerun using a gravimetric procedure.
Rejects and pulps are stored at Golden Vertex's warehouse in
Bullhead City for future
reference.
Qualified Person
The foregoing technical
information contained in this news release has also been reviewed
and verified by Mr. Joseph
Bardswich, P.Eng., a director of the Company and a Qualified
Person ("QP") for the purpose of National Instrument 43-101
(Disclosure Standards for Mineral Projects).
Neither TSX Venture Exchange nor its Regulation Services
Provider (as that term is defined in the policies of the TSX
Venture Exchange) accepts responsibility for the adequacy or
accuracy of this release.
About Northern Vertex Mining Corp.
Northern
Vertex Mining Corp. is focused on low cost gold and silver
production at its 100% owned Moss Mine in NW Arizona. The Company has experience across
all areas of operations, mine development, exploration,
acquisitions, and financing of mining projects. With operations at
the flagship Moss Mine achieving commercial production the Company
intends to consolidate additional producing or near-term production
gold assets within the Western US. Through mergers and acquisitions
Northern Vertex's corporate goal is to become a mid-tier gold
producer.
ON BEHALF OF THE BOARD OF NORTHERN VERTEX
"Kenneth
Berry"
President & CEO
Cautionary Note Regarding Forward-Looking
Statements:
This news release contains
statements about our future business and planned activities. These
are "forward-looking" because we have used what we know and expect
today to make a statement about the future. Forward-looking
statements including but are not limited to comments regarding the
timing and content of upcoming work and analyses. Forward-looking
statements usually include words such as scheduled, may, intend,
plan, expect, anticipate, believe or other similar words.
Forward-looking statements are necessarily based upon a number of
factors and assumptions that, while considered reasonable by the
Company as of the date of such statements, are inherently subject
to significant business, economic and competitive uncertainties,
and contingencies. Many factors, known and unknown, could cause
actual results to be materially different from those expressed or
implied by such forward-looking statements. We believe the
expectations reflected in these forward-looking statements are
reasonable. However, actual events and results could be
substantially different because of the risks and uncertainties
associated with our business or events that happen after the date
of this news release. Readers are cautioned not to place undue
reliance on forward-looking statements, which speak only as of the
date made. As a general policy, we do not update forward-looking
statements except as required by securities laws and regulations.
US investors should be aware that mining terminology used for
Canadian mineral project reporting purposes differs significantly
from US terminology.
View original content to download
multimedia:http://www.prnewswire.com/news-releases/northern-vertex-drilling-intercepts-109-8-meters-of-0-79-gpt-gold--24-41-gpt-silver-301153214.html
SOURCE Northern Vertex Mining Corp.