TORONTO, July 26, 2021 /CNW/ - Orefinders
Resources Inc. ("Orefinders" or the "Company") (TSXV: ORX) is
pleased to provide an update on its exploration and drill plans
since the announcement of the $60
million strategic investment and partnership with
Kirkland Lake Gold. Since then the
respective technical teams have completed the planning and
budgeting and are prepared to proceed with a Phase 2 drill program
on Orefinders Knight Gold Project in the Shining Tree District of
Ontario.
The Phase 2 drill program is planned for 5,000 metres and is
expected to begin by the end of Q3 2021. This program is a
follow-up to Orefinders Phase 1 drill program, which was completed
on April 9, 2021.
About Phase 2 Drilling on Knight
Phase 2 drilling will
include several holes designed to test the continuity of the
higher-grade mineralization beneath and to the south of the
Tyranite mine. Targeting includes following a moderately-steep
plunge angle (Figure 1) within a region that has not previously
been drilled. Phase 2 drilling will also include follow up
exploration on the Duggan target zone where positive results were
returned from Phase 1 drilling (News Release dated May 10, 2021).
Phase 1 Summary
26 drill holes were completed at the
Knight Project representing 11,204 metres. Details on the
objectives and target zones for Phase 1 drilling area available
here. Results from all assays have now been received
representing the 6,232 samples from the Phase 1 program that were
submitted to the assay lab. Previously announced results for Phase
1 drilling were presented in News Releases dated November 5, 2020; January
29, 2021; February 11, 2021;
and May 10, 2021. Final results from
the Phase 1 assay database for the Tyranite target zone are
discussed below.
Further Technical Detail – Tyranite Zone Final
Results
All assay results have been returned for the 13
Phase 1 drill holes completed at the Tyranite target zone which
includes the historical Tyranite mine. Results of note that have
been returned since a previous news release (May 10, 2021) are listed in Table 1 and plotted
in a longitudinal section of the mineralized Tyranite structure
(Figure 1).
The new results presented in Table 1 and Figure 1 are from Phase
1 drill holes that validated continuity of lower grade
mineralization at shallow depths (to about 350 metres vertical)
within the northern part of the Tyranite Zone where it is hosted
within the syenitic rocks of the Milly Creek intrusive body. Phase
1 drilling also successfully validated continuity of the deeper,
higher grade gold mineralization reported from historical drilling
beneath the underground workings (News Release dated November 5, 2020) to a vertical depth of about
500 metres.
Following completion of Phase 1 drilling a new geological and
structural model was completed for Tyranite. The new model provides
insights on potential structural controls on gold mineralization at
depth and indicates a new high priority Phase 2 drilling target
plunging to the South (Figure 1).
Table 1. Knight Phase 1 New Reported Gold Mineralized
Intervals
|
|
|
|
|
Drill
Hole
|
Length
(m)
|
Au
(gpt)
|
From
(m)
|
To
(m)
|
TYR20-008
|
7.4
|
2.1
|
290.0
|
297.3
|
TYR20-009
|
14.3
|
1.4
|
198.6
|
212.8
|
TYR20-010
|
9.1
|
1.4
|
189.8
|
198.9
|
TYR20-011
|
14.7
|
1.9
|
335.9
|
350.6
|
TYR20-012
|
10.2
|
1.8
|
127.0
|
137.2
|
Note: The gold grades
and lengths were calculated for economic composites using Leapfrog
Geo software and a cut-off grade of 0.8 g/t.
|
Figure 1. Tyranite structure showing economic composites for
historical and Phase 1 drill holes calculated using a 0.8 gpt
cut-off grade. Composites from Table 1 are labeled.
Click here for Figure 1
QP Statement
The technical information in this news
release has been reviewed and approved by Dr. Keith Benn, P.Geo., Vice President Exploration
for Orefinders, a Qualified Person as defined in "National
Instrument 43-101, Standards of Disclosure for Mineral
Projects." For the exploration undertaken by Orefinders, all
assay batches are accompanied by rigorous Quality Assurance
procedures that include insertion of standards and blanks and
verification assays in a secondary laboratory. Quality
Control results, including the laboratory's control samples, are
evaluated immediately on reception of batch results and corrections
implemented immediately if necessary.
About Orefinders Resources Inc.
Orefinders is a Gold exploration and development company focused
exclusively on the Abitibi Greenstone Belt. The Company is listed
on the Toronto Venture Exchange under the symbol ORX.
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in
the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this
release. Certain information in this press release may contain
forward-looking statements. This information is based on current
expectations that are subject to significant risks and
uncertainties that are difficult to predict. Actual results might
differ materially from results suggested in any forward-looking
statements. Orefinders' assumes no obligation to update the
forward-looking statements, or to update the reasons why actual
results could differ from those reflected in the forward
looking-statements unless and until required by securities laws
applicable to Orefinders. Additional information identifying risks
and uncertainties is contained in filings by Orefinders with
Canadian securities regulators, which filings are available under
Orefinders' profile at www.sedar.com.
For the latest updates, please contact or follow us on Twitter
@OrefindersR
SOURCE Orefinders Resources Inc.