VANCOUVER, Jan. 5, 2015 /CNW/ - Western Pacific
Resources Corp. ("Western Pacific" or the "Company") (TSX-V:
WRP) announces the completion of the diamond drill program at
the Deer Trail Mine, located in Piute
County, Utah. The Company exceeded its planned program by
drilling 19,131 ft in a total of 46 holes. The company is now
assessing the results of the drill program and performing
metallurgical analysis with the goal of evaluating the viability of
bringing the mine back into production.
Assays for a total of 37 holes have been received to date. These
holes consist of 16,041.5 ft of drilling from two underground drill
stations and include grades of up to 82.7 g/t gold, 24,981 g/t
silver, 12.25% lead and 25.3% zinc; this intersection, in hole
DTM-14-37, is the highest grade intersection received to date from
the 2014 drill program. Highlights from drill holes DT14-15 thru
DT14-37 are listed in the table below. Drill holes DT14-01 thru
DT14-14 were disclosed in a news release dated October 2, 2014.
Table 1.
Highlights intercepts table with grade/width
averages
|
Drill
hole
|
Manto
|
From
|
To
|
Interval
|
Au
|
Ag
|
Pb
|
Zn
|
Cu
|
|
|
ft
|
ft
|
ft
|
g/t
|
g/t
|
%
|
%
|
%
|
DT14-15
|
S4
|
216.4
|
217.7
|
1.3
|
1.4
|
195
|
4.91
|
6.69
|
|
|
Veins
|
225
|
226.8
|
1.8
|
2.48
|
296
|
4.16
|
3.34
|
|
DT14-17
|
S4
|
283
|
285
|
2
|
4.45
|
361
|
0.18
|
0.27
|
0.49
|
DT14-20
|
S7
|
418.7
|
423
|
4.3
|
26.71
|
5,823
|
0.81
|
3.89
|
|
|
incl
|
420
|
421.5
|
1.5
|
76.1
|
16,607
|
1.22
|
6.46
|
|
DT14-21
|
S4
|
181
|
193
|
12
|
3.55
|
623
|
0.52
|
0.72
|
|
|
incl
|
183
|
186
|
3
|
12.45
|
2,230
|
1.77
|
2.53
|
0.66
|
|
Hydrobx
|
568
|
586.5
|
18.5
|
0.21
|
97.9
|
2.74
|
2.13
|
|
|
incl
|
568
|
570
|
2
|
0.48
|
208
|
8.6
|
13.1
|
0.84
|
|
incl
|
583
|
586.5
|
3.5
|
0.66
|
308
|
8.9
|
3.5
|
1.15
|
DT14-23
|
S8
|
402.3
|
414.4
|
12.1
|
0.52
|
123.60
|
3.63
|
5.33
|
0.41
|
|
incl
|
410.6
|
414.4
|
3.8
|
0.70
|
144
|
6.01
|
10.25
|
0.67
|
DT14-24
|
S4
|
176
|
177.1
|
1.1
|
64.2
|
2,930
|
0.78
|
1.37
|
|
|
S7
|
353
|
363
|
10
|
0.51
|
219
|
3.52
|
3.84
|
|
|
incl
|
358
|
363
|
5
|
0.81
|
376
|
5.88
|
5.57
|
0.59
|
DT14-25
|
S7
|
473.5
|
477
|
3.5
|
6.06
|
1,826
|
0.85
|
0.73
|
|
|
incl
|
475
|
477
|
2
|
9.6
|
2,850
|
0.88
|
0.32
|
|
DT14-28
|
S7
|
399
|
411
|
12
|
1.51
|
259
|
2.53
|
5.42
|
|
|
incl
|
401
|
403.7
|
2.7
|
4.35
|
471
|
6.43
|
15.90
|
|
|
incl
|
406.5
|
407.3
|
0.8
|
1.08
|
279
|
6.32
|
10.45
|
|
|
S8
|
464
|
465
|
1
|
2.31
|
695
|
5.48
|
1.40
|
1.27
|
DT14-29
|
S7
|
334
|
336
|
2
|
6.61
|
2,180
|
3.63
|
3.22
|
|
DT14-31
|
S7
|
367.5
|
372
|
4.5
|
2.05
|
973
|
2.36
|
1.10
|
|
DT14-33
|
S4
|
196.5
|
198
|
1.5
|
4.20
|
1,000
|
6.10
|
9.03
|
2.07
|
|
S6
|
258
|
261
|
3
|
0.59
|
184
|
6.21
|
7.05
|
0.74
|
DT14-34
|
|
118
|
120
|
2
|
2.01
|
859
|
0.96
|
1.03
|
1.60
|
DT14-35
|
S4
|
157.6
|
159.5
|
1.9
|
25.2
|
1,435
|
0.15
|
0.66
|
|
|
S7
|
355
|
362.5
|
7.5
|
1.85
|
170
|
2.56
|
3.91
|
|
|
S7
|
361.5
|
362.5
|
1
|
8.91
|
672
|
12.25
|
25.30
|
|
DT14-37
|
S3
|
109
|
113
|
4
|
13.2
|
511
|
1.09
|
2.06
|
|
|
S4
|
188
|
193
|
5
|
26.15
|
7,744
|
1.67
|
0.55
|
|
|
incl
|
188
|
189.5
|
1.5
|
82.7
|
24,981
|
5.43
|
1.62
|
|
|
S7
|
316.6
|
318
|
1.4
|
1.51
|
2,500
|
0.46
|
0.32
|
1.05
|
A complete list of assays from drill holes DT14-15 to DT14-37 is
located in Appendix 1. Full details of all drill results including
assays, hole location, dip and azimuth is available on the
Company's website at
http://www.westernpacificresources.com/i/pdf/DT14-01-37-AllSamples-Dec2014.pdf.
The project contains several structural blocks and there is
insufficient data from the drilling to accurately calculate true
intercept thickness at this time.
The drill program was focused in the 3400 area of the mine where
drilling was being performed from the main PTH haulage tunnel. The
long section diagram below shows the PTH tunnel and the interpreted
orientation of the mineralization.
Figure 1. 3400 Area Long Section Diagram
"It is very encouraging that drilling continues to return
high-grade intercepts in multiple stacked zones," stated
Michael Callahan, Western Pacific's
President and CEO. "The S4 manto, which was the focus of some
historic mining, is locally returning better grades than expected.
The program was completed on schedule and within budget. As the
last of our assays are received we look forward to assessing the
results of the drill program as well as those from the
metallurgical testing program which is now underway."
Significant base metal mineralization has been encountered in
mantos S4, S6, S7 and S8 with assays returning combined base metals
values up to 37.5%. For example, hole DT14-35 returned 1 ft of 8.7
g/t gold, 672 g/t silver, 15.5% copper and 25.3% zinc. Some holes
indicate local potential for wider zones where drilling returned
base metal and/or precious metal mineralization over several feet.
An example of this can be seen in hole DT14-28, which returned 12
ft averaging 1.51 g/t gold, 259 g/t silver, 2.53% copper and 5.42%
zinc.
The spread of values between the various mantos confirms the
layer-cake stacking of the base metal manto mineralization within
the sedimentary stratigraphic sequences. This provides for
additional exploration that goes beyond the scope of the current
drill program and would potentially be targeted in the future.
High-grade precious metal mineralization is also showing a
different occurrence than within the strictly manto-style base
metal mineralization as previously believed. On-going multi-element
geochemical analysis shows that there is a strong association
between silver, gold and tellurium, and not necessarily with the
base metals lead, zinc, arsenic and antimony. This suggests that
precious metals may be a separate mineralizing event and that
potentially economic gold and silver mineralization is hosted by
gold and silver tellurides.
The drill program has encountered an additional previously
unknown manto, S8, which lies approximately 60 ft below the S7
manto. Drilling has shown that, like S7, it occurs within a
sedimentary unit, the Lower Carbonate and Quartzite (LCAQ) of the
Callville Formation, rather than at a distinct contact between two
different units like S4, which occurs adjacent to the contact
between the Lower Dark Lentil (LDL) and the Middle Quartzite-Big
Sandy Zone (MQ-BSZ). When S8 is encountered it is well mineralized
and up to 10 ft thick, though mineralization is not as consistent
as S4 or S7. Deeper drilling, for example in drill hole DT14-21,
has revealed hydrothermal breccias and associated alteration that
hosts potentially economic precious metal and base metal
mineralization. This alteration suite is interpreted to be
associated with peripheral porphyry-style mineralization.
The section map below illustrates the location of the mantos in
relation to the drill stations. The close proximity between these
provides the benefit of multiple intercepts in the structures,
resulting in a significant amount of data by drilling relatively
short holes.
Figure 2. Section Map for Drill Stations 1, 2 and 3
Figure 3. Section Map for Drill Stations 4 and 5
To date results from 37 holes totaling 16,041.5 ft of drilling
have been received. Results from the completed drill program will
allow the Company to better evaluate the strategy for putting the
mine back into production.
Appendix 1
Table 2. Drill
Results from Deer Trail Mine
|
Drill
hole
|
Manto
|
From
(ft)
|
To
(ft)
|
Interval
|
Au
|
Ag
|
Pb
|
Zn
|
Cu
|
|
|
|
|
(ft)
|
g/t
|
g/t
|
%
|
%
|
%
|
DT14-15
|
Veins
|
205.4
|
206.4
|
1
|
0.12
|
59.1
|
0.14
|
0.52
|
0.27
|
DT14-15
|
Veins
|
211.4
|
216.4
|
5
|
0.05
|
10.8
|
0.28
|
0.57
|
0.05
|
DT14-15
|
S4
|
216.4
|
217.7
|
1.3
|
1.4
|
195
|
4.91
|
6.69
|
0.58
|
DT14-15
|
Veins
|
225
|
226.8
|
1.8
|
2.48
|
296
|
4.16
|
3.34
|
0.29
|
DT14-15
|
Veins
|
226.8
|
231.8
|
5
|
0.15
|
42.2
|
0.48
|
0.53
|
0.07
|
DT14-15
|
S5?
|
250
|
251
|
1
|
0.66
|
197
|
1.19
|
0.77
|
0.99
|
DT14-15
|
Veins
|
251
|
256
|
5
|
0.17
|
12.4
|
0.21
|
0.46
|
0.01
|
DT14-15
|
Veins
|
256
|
261
|
5
|
0.32
|
24.4
|
0.3
|
0.57
|
0.05
|
DT14-15
|
S6
|
263.9
|
265
|
1.1
|
0.08
|
27.9
|
1.04
|
3.01
|
0.19
|
DT14-15
|
S7
|
401.9
|
402.9
|
1
|
0.11
|
30.9
|
0.57
|
0.27
|
0.07
|
DT14-15
|
Veins
|
413.1
|
414.2
|
1.1
|
0.11
|
17.3
|
0.41
|
0.22
|
0.01
|
DT14-16
|
S4
|
195
|
197
|
2
|
1.09
|
241
|
0.22
|
0.23
|
0.14
|
DT14-16
|
S4
|
197
|
197.2
|
0.2
|
0.26
|
11.7
|
0.02
|
0.12
|
0.03
|
DT14-16
|
Veins
|
232.1
|
234.3
|
2.2
|
0.02
|
4.7
|
0.01
|
0.34
|
0.01
|
DT14-16
|
S7
|
364.2
|
366.2
|
2
|
0.01
|
4.6
|
0.07
|
0.16
|
0.01
|
DT14-16
|
S7
|
366.2
|
370.6
|
4.4
|
0.17
|
34
|
1.03
|
0.32
|
0.13
|
DT14-16
|
S7
|
374.4
|
375.4
|
1
|
0.02
|
5.1
|
0.33
|
0.54
|
0.03
|
DT14-16
|
S7
|
375.4
|
376.9
|
1.5
|
0.17
|
26.5
|
2.26
|
2.82
|
0.15
|
DT14-16
|
S7
|
376.9
|
380
|
3.1
|
0.02
|
5.8
|
0.14
|
0.23
|
0.03
|
DT14-16
|
S7
|
380
|
385
|
5
|
0.05
|
8.7
|
0.16
|
0.25
|
0.06
|
DT14-16
|
S7
|
385
|
386
|
1
|
0.16
|
46.3
|
2.31
|
1.42
|
0
|
DT14-17
|
S4
|
278.5
|
280.2
|
1.7
|
0.09
|
16.1
|
0.84
|
1.14
|
0.09
|
DT14-17
|
S4
|
280.2
|
283
|
2.8
|
0.04
|
0.9
|
0
|
0.02
|
0
|
DT14-17
|
S4
|
283
|
285
|
2
|
4.45
|
361
|
0.18
|
0.27
|
0.49
|
DT14-17
|
S4
|
285
|
290
|
5
|
0.03
|
3.5
|
0.04
|
0.05
|
0.01
|
DT14-17
|
S4
|
290
|
295
|
5
|
0.07
|
8.2
|
0.08
|
0.1
|
0.07
|
DT14-17
|
S4
|
295
|
299.7
|
4.7
|
0.07
|
8.4
|
0.05
|
0.15
|
0.01
|
DT14-17
|
S7
|
426.2
|
429.3
|
3.1
|
0.09
|
4.1
|
0.04
|
0.11
|
0
|
DT14-17
|
S7
|
429.3
|
432.8
|
3.5
|
0.05
|
12.5
|
0.15
|
0.31
|
0.06
|
DT14-17
|
S7
|
432.8
|
435
|
2.2
|
0.42
|
95.1
|
1.07
|
0.67
|
0.16
|
DT14-17
|
S7
|
435
|
437
|
2
|
bd
|
0.5
|
0.02
|
0.09
|
0
|
DT14-17
|
S7
|
437
|
439.2
|
2.2
|
bd
|
3.3
|
0.04
|
0.15
|
0.01
|
DT14-20
|
S4
|
218.2
|
222
|
3.8
|
0.33
|
47
|
0.63
|
0.61
|
0.75
|
DT14-20
|
S4
|
222
|
224
|
2
|
0.09
|
18.9
|
0.08
|
0.11
|
0.06
|
DT14-20
|
S4
|
224
|
226.5
|
2.5
|
0.18
|
42.6
|
0.2
|
0.36
|
0.13
|
DT14-20
|
S6
|
363.8
|
366.5
|
2.7
|
1.96
|
191
|
2.99
|
1.01
|
0.41
|
DT14-20
|
S7
|
418.7
|
420
|
1.3
|
0.35
|
76.7
|
0.59
|
2.51
|
0.02
|
DT14-20
|
S7
|
420
|
421.5
|
1.5
|
76.1
|
16,607
|
1.22
|
6.46
|
0.29
|
DT14-20
|
S7
|
421.5
|
423
|
1.5
|
0.16
|
20.3
|
0.59
|
2.51
|
0.02
|
DT14-21
|
S3
|
113
|
116
|
3
|
0.38
|
31.3
|
0.18
|
0.34
|
0.02
|
DT14-21
|
S4
|
178
|
181
|
3
|
0.29
|
44.3
|
0.51
|
0.35
|
0.13
|
DT14-21
|
S4
|
181
|
183
|
2
|
0.82
|
103
|
0.16
|
0.33
|
0.03
|
DT14-21
|
S4
|
183
|
186
|
3
|
12.45
|
2,230
|
1.77
|
2.53
|
0.66
|
DT14-21
|
S4
|
186
|
189
|
3
|
0.51
|
65
|
0.13
|
0.05
|
0.03
|
DT14-21
|
S4
|
189
|
193
|
4
|
0.54
|
96.8
|
0.05
|
0.05
|
0.01
|
DT14-21
|
S7
|
325.5
|
327.5
|
2
|
0.28
|
91
|
2.25
|
2.71
|
0.29
|
DT14-21
|
S8
|
363
|
368.5
|
5.5
|
0.01
|
9.1
|
0.03
|
0.07
|
0
|
DT14-21
|
Hydrobx
|
417.5
|
418.5
|
1
|
0.01
|
4.2
|
0.05
|
0.24
|
0.02
|
DT14-21
|
Hydrobx
|
466
|
468
|
2
|
0.07
|
13.9
|
0.49
|
1.65
|
0.08
|
DT14-21
|
Hydrobx
|
468
|
470
|
2
|
0.04
|
33
|
0.44
|
0.47
|
0.06
|
DT14-21
|
Hydrobx
|
470
|
474
|
4
|
0.05
|
22.9
|
0.31
|
0.46
|
0.04
|
DT14-21
|
Hydrobx
|
483
|
488
|
5
|
3.4
|
172
|
0.01
|
0.01
|
0
|
DT14-21
|
Hydrobx
|
488
|
493
|
5
|
1.58
|
91
|
0.3
|
0.18
|
0
|
DT14-21
|
Hydrobx
|
523
|
528
|
5
|
0.31
|
53.7
|
0.09
|
0.51
|
0.01
|
DT14-21
|
Hydrobx
|
553
|
558
|
5
|
0.24
|
72.1
|
0.15
|
0.1
|
0.01
|
DT14-21
|
Hydrobx
|
558
|
563
|
5
|
0.3
|
62
|
0.38
|
0.16
|
0.02
|
DT14-21
|
Hydrobx
|
563
|
568
|
5
|
0.18
|
53.6
|
0.2
|
0.12
|
0.03
|
DT14-21
|
Hydrobx
|
568
|
570
|
2
|
0.48
|
208
|
8.6
|
13.1
|
0.84
|
DT14-21
|
Hydrobx
|
570
|
575
|
5
|
0.07
|
26.4
|
0.29
|
0.14
|
0.11
|
DT14-21
|
Hydrobx
|
575
|
583
|
8
|
0.03
|
23.2
|
0.12
|
0.05
|
0.02
|
DT14-21
|
Hydrobx
|
583
|
586.5
|
3.5
|
0.66
|
308
|
8.87
|
3.48
|
>1%
|
DT14-21
|
Hydrobx
|
586.5
|
588
|
1.5
|
0.04
|
20.4
|
0.12
|
0.03
|
0.01
|
DT14-21
|
Hydrobx
|
588
|
593
|
5
|
0.04
|
29.5
|
1.09
|
0.39
|
0.1
|
DT14-21
|
Hydrobx
|
593
|
598
|
5
|
0.01
|
10.1
|
0.21
|
0.37
|
0.03
|
DT14-21
|
Hydrobx
|
598
|
603
|
5
|
0.02
|
15.6
|
0.23
|
0.3
|
0.04
|
DT14-21
|
Hydrobx
|
603
|
608
|
5
|
0.14
|
39.9
|
1.55
|
3.37
|
0.09
|
DT14-21
|
Hydrobx
|
608
|
613
|
5
|
0.43
|
93
|
1.41
|
0.28
|
0.03
|
DT14-22
|
S4
|
187.7
|
189.6
|
1.9
|
13.45
|
545
|
0.46
|
1.41
|
0.03
|
DT14-22
|
S7
|
353.5
|
357
|
3.5
|
0.061
|
24.1
|
0.69
|
0.32
|
0.04
|
DT14-22
|
S7
|
357
|
361.5
|
4.5
|
0.183
|
60.4
|
0.9
|
0.18
|
0.06
|
DT14-22
|
Hydrobx
|
511.5
|
514
|
2.5
|
0.096
|
79.8
|
0.87
|
1.23
|
0.27
|
DT14-22
|
Hydrobx
|
515
|
520
|
5
|
0.073
|
84.8
|
0.95
|
0.06
|
0.1
|
DT14-22
|
Hydrobx
|
520
|
525
|
5
|
0.199
|
146
|
0.49
|
0.9
|
0.08
|
DT14-22
|
Hydrobx
|
525
|
530
|
5
|
0.339
|
46
|
0.35
|
0.3
|
0.02
|
DT14-22
|
Hydrobx
|
530
|
535
|
5
|
0.828
|
90.2
|
0.53
|
0.3
|
0.01
|
DT14-22
|
Hydrobx
|
570
|
575
|
5
|
0.234
|
64.5
|
0.17
|
0.19
|
0.09
|
DT14-23
|
S4
|
183
|
183.5
|
0.5
|
0.4
|
60.1
|
0.13
|
0.16
|
0.02
|
DT14-23
|
S7
|
354.5
|
360
|
5.5
|
0.48
|
40.5
|
1.38
|
1.25
|
0.36
|
DT14-23
|
S7
|
370.6
|
371.8
|
1.2
|
0.05
|
12
|
0.21
|
0.14
|
0.02
|
DT14-23
|
S8
|
402.3
|
405.3
|
3
|
0.78
|
181
|
3.46
|
4.24
|
0.43
|
DT14-23
|
S8
|
405.3
|
407.3
|
2
|
0.49
|
99.4
|
3.1
|
3.73
|
0.26
|
DT14-23
|
S8
|
407.3
|
410.6
|
3.3
|
0.08
|
62.6
|
1.35
|
1.62
|
0.18
|
DT14-23
|
S8
|
410.6
|
414.4
|
3.8
|
0.7
|
144
|
6.01
|
10.25
|
0.67
|
DT14-24
|
S4
|
176
|
177.1
|
1.1
|
64.2
|
2,930
|
0.78
|
1.37
|
0.02
|
DT14-24
|
S7
|
349
|
353
|
4
|
0.04
|
5.5
|
0.05
|
0.12
|
0
|
DT14-24
|
S7
|
353
|
358
|
5
|
0.22
|
61.7
|
1.17
|
2.1
|
0.19
|
DT14-24
|
S7
|
358
|
363
|
5
|
0.81
|
376
|
5.88
|
5.57
|
0.59
|
DT14-24
|
S7
|
363
|
367.6
|
4.6
|
0.02
|
3.5
|
0.05
|
0.1
|
0.01
|
DT14-24
|
S8
|
384
|
386.5
|
2.5
|
0.34
|
91
|
1.48
|
0.32
|
0.19
|
DT14-24
|
S8
|
386.5
|
391
|
4.5
|
0.14
|
95.4
|
1.17
|
0.28
|
0.29
|
DT14-25
|
S4
|
220.5
|
221.5
|
1
|
6.7
|
770
|
0.45
|
1.09
|
0.26
|
DT14-25
|
S6?
|
268
|
270
|
2
|
0.09
|
32.6
|
1.69
|
0.11
|
0.05
|
DT14-25
|
S6?
|
274
|
276
|
2
|
0.31
|
82.1
|
0.87
|
0.18
|
0
|
DT14-25
|
S6?
|
276
|
278
|
2
|
0.17
|
19.25
|
0.29
|
0.36
|
0.36
|
DT14-25
|
S7?
|
473.5
|
475
|
1.5
|
1.35
|
460
|
0.82
|
1.26
|
0.04
|
DT14-25
|
S7?
|
475
|
477
|
2
|
9.6
|
2850
|
0.88
|
0.32
|
0.24
|
DT14-26
|
S3
|
111.5
|
114
|
2.5
|
1.9
|
>100
|
0.66
|
0.08
|
0.06
|
DT14-26
|
S4
|
183.5
|
184.5
|
1
|
0.81
|
48.7
|
0.04
|
0.14
|
0.01
|
DT14-26
|
S4
|
184.5
|
186.5
|
2
|
0.59
|
183
|
1.12
|
2.07
|
0.32
|
DT14-26
|
S4
|
186.5
|
189.5
|
3
|
0.08
|
12.7
|
0.03
|
0.05
|
0.02
|
DT14-27
|
S4
|
184
|
187.5
|
3.5
|
3.37
|
337
|
0.74
|
0.85
|
0.13
|
DT14-27
|
S7
|
358.5
|
359.5
|
1
|
0.123
|
93
|
0.63
|
0.8
|
0.14
|
DT14-27
|
S7
|
359.5
|
361.5
|
2
|
0.495
|
61.5
|
1.01
|
0.78
|
0.15
|
DT14-27
|
S7
|
361.5
|
364.5
|
3
|
0.097
|
24.5
|
0.45
|
0.8
|
0.05
|
DT14-27
|
S7
|
364.5
|
369
|
4.5
|
0.015
|
7.03
|
0.12
|
0.21
|
0.02
|
DT14-27
|
S7
|
369
|
370
|
1
|
0.034
|
9.98
|
0.1
|
0.08
|
0.02
|
DT14-27
|
S7
|
370
|
374
|
4
|
0.593
|
263
|
1.06
|
0.84
|
0.2
|
DT14-27
|
S7
|
374
|
376
|
2
|
0.461
|
240
|
1.19
|
0.43
|
0.63
|
DT14-27
|
?
|
376
|
379
|
3
|
0.141
|
54
|
0.11
|
0.12
|
0.06
|
DT14-27
|
S8
|
379
|
383
|
4
|
0.016
|
4.53
|
0.01
|
0.04
|
0.01
|
DT14-27
|
S8
|
383
|
385.5
|
2.5
|
0.344
|
127
|
0.62
|
0.97
|
0.4
|
DT14-27
|
S8
|
389
|
394
|
4
|
0.04
|
12.6
|
0.16
|
0.25
|
0.04
|
DT14-27
|
S8
|
394
|
398
|
4
|
0.116
|
56.3
|
0.07
|
0.06
|
0.02
|
DT14-27
|
S8
|
398
|
399
|
1
|
0.051
|
35.2
|
0.28
|
0.34
|
0.03
|
DT14-27
|
S8
|
399
|
400.5
|
1.5
|
0.117
|
32.3
|
0.39
|
1.04
|
0.06
|
DT14-28
|
S3
|
111.5
|
114
|
2.5
|
0.05
|
24.3
|
0.24
|
0.48
|
0.26
|
DT14-28
|
S4
|
174.6
|
178.5
|
3.9
|
1.2
|
51.8
|
0.01
|
0.16
|
0
|
DT14-28
|
S4
|
178.5
|
182
|
3.5
|
1.61
|
57.5
|
0.02
|
0.13
|
0
|
DT14-28
|
S7
|
399
|
399.7
|
0.7
|
0.92
|
133
|
2.03
|
4.88
|
0
|
DT14-28
|
S7
|
399.7
|
401
|
1.3
|
0.05
|
4.12
|
0.03
|
0.12
|
0
|
DT14-28
|
S7
|
401
|
403.7
|
2.7
|
4.35
|
471
|
6.43
|
15.9
|
0.12
|
DT14-28
|
S7
|
403.7
|
406.5
|
2.8
|
0.02
|
5.96
|
0.16
|
0.29
|
0.01
|
DT14-28
|
S7
|
406.5
|
407.3
|
0.8
|
1.08
|
279
|
6.32
|
10.45
|
0.03
|
DT14-28
|
S7
|
407.3
|
409
|
1.7
|
0.1
|
56.2
|
1.13
|
1.76
|
0.11
|
DT14-28
|
S7
|
409
|
411
|
2
|
2.29
|
703
|
2.06
|
3.17
|
0.2
|
DT14-28
|
S8
|
442.5
|
444
|
1.5
|
0.31
|
26.6
|
0.02
|
0.04
|
0
|
DT14-28
|
S8
|
444
|
445.5
|
1.5
|
0.02
|
4.89
|
0.01
|
0.06
|
0.01
|
DT14-28
|
S8
|
445.5
|
448.5
|
3
|
0.06
|
14.7
|
0.01
|
0.03
|
0.02
|
DT14-28
|
S8
|
448.5
|
449.2
|
0.7
|
3.25
|
384
|
0.06
|
0.06
|
0.07
|
DT14-28
|
S8
|
449.2
|
451.5
|
2.3
|
0.02
|
9.01
|
0.15
|
0.23
|
0.01
|
DT14-28
|
S8
|
451.5
|
452.3
|
0.8
|
0.13
|
59
|
3.25
|
3.01
|
0.22
|
DT14-28
|
S8
|
452.3
|
457
|
4.7
|
0.22
|
46.4
|
0.1
|
0.16
|
0.02
|
DT14-28
|
S8
|
457
|
461
|
4
|
0.02
|
5.82
|
0.05
|
0.19
|
0.02
|
DT14-28
|
S8
|
461
|
462.5
|
1.5
|
0.06
|
21.1
|
0.04
|
0.07
|
0.01
|
DT14-28
|
S8
|
462.5
|
464
|
1.5
|
0.23
|
92.4
|
0.72
|
0.99
|
0.16
|
DT14-28
|
S8
|
464
|
465
|
1
|
2.31
|
695
|
5.48
|
1.4
|
1.27
|
DT14-29
|
S4
|
197.5
|
199
|
1.5
|
0.7
|
117
|
0.36
|
0.54
|
0.2
|
DT14-29
|
S7
|
334
|
336
|
2
|
6.61
|
2180
|
3.63
|
3.22
|
0.12
|
DT14-29
|
S7
|
340
|
344
|
4
|
0.14
|
98.8
|
0.18
|
0.32
|
0.07
|
DT14-29
|
S7
|
344
|
346.7
|
2.7
|
0.04
|
37.1
|
0.08
|
0.2
|
0.04
|
DT14-29
|
??
|
459
|
461.5
|
2.5
|
0.06
|
26.5
|
0.14
|
0.21
|
0.01
|
DT14-29
|
??
|
463.5
|
465.5
|
2
|
0.01
|
10.55
|
0.02
|
0.25
|
0.02
|
DT14-29
|
??
|
469
|
474
|
5
|
0.03
|
21
|
0.12
|
0.56
|
0.04
|
DT14-29
|
??
|
474
|
479
|
5
|
0.01
|
10.4
|
0.23
|
0.31
|
0.06
|
DT14-30
|
S4
|
197.5
|
199
|
1.5
|
1.47
|
70.7
|
0.03
|
0.09
|
|
DT14-30
|
S4
|
199
|
203
|
4
|
0.423
|
30.8
|
0.04
|
0.39
|
|
DT14-30
|
S4
|
203
|
205
|
2
|
0.175
|
8.08
|
0.01
|
0.43
|
|
DT14-30
|
S7
|
319
|
319.8
|
0.8
|
0.225
|
56.3
|
2.34
|
2.71
|
|
DT14-30
|
S8
|
358
|
363
|
5
|
0.256
|
45.7
|
0.34
|
0.25
|
|
DT14-30
|
S8
|
363
|
368
|
5
|
0.281
|
42.1
|
0.37
|
0.08
|
|
DT14-31
|
S3
|
136
|
138.5
|
2.5
|
0.08
|
14.8
|
0.08
|
0.54
|
0.01
|
DT14-31
|
S4
|
179
|
184
|
5
|
0.26
|
23.1
|
0.02
|
0.08
|
0.01
|
DT14-31
|
S4
|
184
|
187
|
3
|
1.17
|
332
|
0.04
|
0.08
|
0.05
|
DT14-31
|
S4
|
187
|
189
|
2
|
0.92
|
52.4
|
0.04
|
0.09
|
0.02
|
DT14-31
|
S7
|
359
|
364
|
5
|
0.15
|
45
|
0.31
|
0.38
|
0.09
|
DT14-31
|
S7
|
364
|
367.5
|
3.5
|
0.17
|
47.8
|
0.21
|
0.16
|
0.15
|
DT14-31
|
S7
|
367.5
|
369
|
1.5
|
0.75
|
790
|
1.61
|
1.4
|
0.03
|
DT14-31
|
S7
|
369
|
372
|
3
|
2.7
|
1065
|
2.74
|
0.95
|
0.07
|
DT14-31
|
S7
|
372
|
374
|
2
|
0.07
|
8.24
|
0.08
|
0.21
|
0.01
|
DT14-31
|
S7
|
374
|
379
|
5
|
0.04
|
66.3
|
0.15
|
0.1
|
0.01
|
DT14-31
|
S8
|
424
|
429
|
5
|
0.04
|
48.3
|
0.95
|
1.2
|
0.07
|
DT14-31
|
S8
|
429
|
434
|
5
|
0.04
|
10
|
0.03
|
0.12
|
0.02
|
DT14-32
|
S3?
|
110.5
|
113
|
2.5
|
2.77
|
91.8
|
1.6
|
2.56
|
0.089
|
DT14-32
|
S3?
|
113
|
115
|
2
|
0.042
|
19.9
|
0.301
|
0.292
|
0.199
|
DT14-33
|
S3?
|
89
|
91
|
2
|
0.06
|
14.8
|
0.14
|
0.14
|
0.15
|
DT14-33
|
S4
|
194
|
196.5
|
2.5
|
0.11
|
26.5
|
0.04
|
0.04
|
0.04
|
DT14-33
|
S4
|
196.5
|
198
|
1.5
|
4.2
|
1000
|
6.1
|
9.03
|
2.07
|
DT14-33
|
S6
|
258
|
261
|
3
|
0.59
|
184
|
6.21
|
7.05
|
0.74
|
DT14-33
|
??
|
277.5
|
281.5
|
4
|
0.38
|
12.5
|
0.16
|
0.21
|
0
|
DT14-34
|
S3
|
103.7
|
105.9
|
2.2
|
0.09
|
27
|
0.44
|
0.75
|
0.15
|
DT14-34
|
S3
|
105.9
|
108
|
2.1
|
0.14
|
43.9
|
0.16
|
3.09
|
0.2
|
DT14-34
|
??
|
118
|
120
|
2
|
2.01
|
859
|
0.96
|
1.03
|
1.6
|
DT14-35
|
S4
|
153
|
156.6
|
3.6
|
1
|
61.7
|
0.1
|
0.18
|
|
DT14-35
|
S4
|
156.6
|
157.6
|
1
|
0.493
|
23.3
|
0.02
|
0.04
|
|
DT14-35
|
S4
|
157.6
|
159.5
|
1.9
|
25.2
|
1435
|
0.15
|
0.66
|
|
DT14-35
|
S4
|
165.4
|
166.4
|
1
|
0.153
|
31.6
|
1.08
|
1.71
|
|
DT14-35
|
S4
|
166.4
|
171.5
|
5.1
|
0.292
|
26
|
0.02
|
0.03
|
|
DT14-35
|
S7
|
355
|
357
|
2
|
2.29
|
276
|
3.25
|
1.66
|
|
DT14-35
|
S7
|
357
|
361.5
|
4.5
|
0.083
|
11.35
|
0.09
|
0.15
|
|
DT14-35
|
S7
|
361.5
|
362.5
|
1
|
8.91
|
672
|
12.25
|
25.3
|
|
DT14-37
|
S3
|
103
|
105
|
2
|
0.296
|
4.07
|
0.01
|
0.11
|
|
DT14-37
|
S3
|
105
|
106
|
1
|
0.233
|
18.4
|
0.55
|
0.28
|
|
DT14-37
|
S3
|
106
|
107
|
1
|
0.478
|
33.1
|
1.47
|
0.13
|
|
DT14-37
|
S3
|
107
|
109
|
2
|
0.076
|
6.03
|
0.28
|
0.33
|
|
DT14-37
|
S3
|
109
|
113
|
4
|
13.2
|
511
|
1.09
|
2.06
|
0.18
|
DT14-37
|
S3
|
113
|
115
|
2
|
0.054
|
3.44
|
0.02
|
0.07
|
|
DT14-37
|
S4
|
186
|
188
|
2
|
0.041
|
4.15
|
0.01
|
0.02
|
|
DT14-37
|
S4
|
188
|
189.5
|
1.5
|
82.7
|
24,981
|
5.43
|
1.62
|
0.16
|
DT14-37
|
S4
|
189.5
|
191
|
1.5
|
2.59
|
654
|
0.07
|
0.18
|
|
DT14-37
|
S4
|
191
|
193
|
2
|
1.4
|
134
|
0.05
|
0.04
|
|
DT14-37
|
S4
|
193
|
194.5
|
1.5
|
0.582
|
93.1
|
0.08
|
0.07
|
|
DT14-37
|
S4
|
194.5
|
196
|
1.5
|
4.94
|
676
|
1.26
|
0.9
|
0.41
|
DT14-37
|
S4
|
196
|
198
|
2
|
0.076
|
9.71
|
0.01
|
0.06
|
|
DT14-37
|
S5
|
221
|
223
|
2
|
0.163
|
25.1
|
0.18
|
0.18
|
|
DT14-37
|
S6
|
235
|
238
|
3
|
0.321
|
97
|
0.05
|
0.02
|
|
DT14-37
|
S6
|
238
|
242
|
4
|
0.833
|
57.6
|
0.08
|
0.16
|
|
DT14-37
|
S7
|
316.6
|
318
|
1.4
|
1.51
|
2500
|
0.46
|
0.32
|
1.05
|
DT14-37
|
|
489.1
|
490.3
|
1.2
|
0.072
|
77.1
|
0.34
|
0.65
|
0.17
|
DT14-37
|
|
490.3
|
493.9
|
3.6
|
0.06
|
5.92
|
0.01
|
0.03
|
|
DT14-37
|
|
493.9
|
497.2
|
3.3
|
0.024
|
9.7
|
0.08
|
0.23
|
|
DT14-37
|
|
497.2
|
499.5
|
2.3
|
0.05
|
29
|
0.31
|
0.39
|
|
Figure 4. Drill Hole Location Map
Core recovery for the holes reported in this release was high,
averaging greater than 99%. Industry standard QA/QC programs
are carried out and maintained on the DTM exploration program by
Eric Saderholm, Qualified
Person. Sample preparation has been carried out by ALS in
Reno and Tucson, assaying has been carried out by ALS
Vancouver.
Qualified Person
Eric Saderholm, B.Sc, Registered
Member (Number 4145463RM), Society
for Mining, Metallurgy, and Exploration, is Western Pacific's
Qualified Person for the purposes of NI 43-101. Mr. Saderholm has
approved the scientific and technical information contained in this
news release.
About Western Pacific Resources Corp.
Western Pacific is a publicly traded resource exploration
company focused on advancing a strong portfolio of precious metal
properties in the Western United
States. The Company is currently exploring the historic
polymetallic Deer Trail Mine in Piute
County, Utah. The Company's shares trade on the TSX Venture
Exchange under the symbol "WRP". Western Pacific's team is led by a
slate of technical and financial experts whose aim is to succeed in
creating shareholder value through the development of its portfolio
of projects as well as by pursuing additional property acquisitions
and other strategic opportunities.
ON BEHALF OF THE BOARD
"Michael Callahan"
Michael Callahan
President & CEO
Neither the TSX Venture Exchange nor its Regulation Services
Provider (as that term is defined in the policies of the TSX
Venture Exchange) accepts responsibility for the adequacy or
accuracy of this release.
Certain statements contained in this news release constitute
forward-looking statements within the meaning of Canadian
securities legislation. Forward-looking statements contained
in this news release include, without limitation, statements in
respect of the proposed development of the Deer Trail Mine
property. These statements relate to future events, business
prospects or opportunities and product development. All such
statements other than statements of historical fact are
forward-looking statements. Forward-looking statements are often,
but not always, identified by the use of words such as "seek",
"anticipate", "plan", "continue", "estimate", "expect, "may",
"will", "project", "predict", "potential", "targeting", "intend",
"could", "might", "should", "believe" and similar expressions. The
Company believes that the expectations reflected in those
forward-looking statements are reasonable, but no assurance can be
given that these expectations will prove to be correct and such
forward-looking statements should not be unduly relied upon. Actual
results and developments may differ, and may differ materially,
from those expressed or implied by the forward-looking statements
contained in this news release.
Forward-looking statements involve known and unknown risks,
uncertainties, assumptions of management and other factors that may
cause actual results or events to differ materially from those
anticipated in such forward-looking statement, including but not
limited to: (a) the Company not having the financial ability to
meet its exploration and development goals; (b) risks associated
with the results of exploration and development activities, the
interpretation of drilling results and other geological risks,
estimation of mineral resources and the geology, grade and
continuity of mineral deposits, project cost overruns or
unanticipated costs and expenses; and (c) such other risks detailed
from time to time in the Company's quarterly and annual filings
with securities regulators and available under the Company's
profile on SEDAR at www.sedar.com.
Although the Company believes that the expectations conveyed
by the forward-looking statements are reasonable based on the
information available to it on the date such statements were made,
no assurances can be given as to future results, approvals or
achievements. Such forward-looking statements have been made
for the purpose of assisting investors in understanding the
Company's business, financial and operational performance and plans
and may not be appropriate for other purposes. The
forward-looking statements contained in this news release are
expressly qualified by this cautionary statement. The Company
disclaims any duty to update any of the forward-looking statements
after the date of this news release to conform such statements to
actual results or to changes in the Company's expectations except
as otherwise required by applicable law.
SOURCE Western Pacific Resources Corp.