The accompanying notes are an integral part of these condensed unaudited financial statements.
Notes to Condensed Financial Statements
June 30, 2020
(unaudited)
NOTE 1 - CONDENSED FINANCIAL STATEMENTS
The accompanying condensed financial statements have been prepared by the Company without audit. In the opinion of management, all adjustments (which include only normal recurring adjustments) necessary to present fairly the financial position, results of operations, and cash flows at June 30, 2020 and for all periods presented herein, have been made.
Certain information and footnote disclosures normally included in financial statements prepared in accordance with accounting principles generally accepted in the United States of America have been condensed or omitted. It is suggested that these condensed financial statements be read in conjunction with the financial statements and notes thereto included in the Company's December 31, 2019 audited financial statements. The results of operations for the periods ended June 30, 2020 and 2019 are not necessarily indicative of the operating results for the full years.
In December 2019, a novel strain of coronavirus disease (“COVID-19”) was first reported in Wuhan, China. Less than four months later, on March 11, 2020, the World Health Organization declared COVID-19 a pandemic. The extent of COVID-19’s impact on the Company’s operational and financial performance will depend on future developments, including the duration, spread and intensity of the pandemic, all of which are uncertain and difficult to predict considering the rapidly evolving landscape. As a result, it is not currently possible to ascertain the overall impact of COVID-19 on the Company’s business. However, if the pandemic continues to evolve into a severe worldwide health crisis, the disease could have a material adverse effect on the Company’s business, results of operations, financial condition and cash flows.
NOTE 2 – SIGNIFICANT ACCOUNTING POLICIES
Use of Estimates
The preparation of financial statements in conformity with generally accepted accounting principles requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.
Revenue Recognition
In general, revenue is recognized when control of the promised goods is transferred to our customers, in an amount that reflects the consideration to which we expect to be entitled in exchange for the goods or services. In order to achieve that core principle, a five-step approach is applied: (1) identify the contract with a customer, (2) identify the performance obligations in the contract, (3) determine the transaction price, (4) allocate the transaction price to the performance obligations in the contract, and (5) recognize revenue allocated to each performance obligation when we satisfy the performance obligation. A performance obligation is a promise in a contract to transfer a distinct good or service to the customer, and is the unit of account for revenue recognition.
We recognize revenue on various products and services as follows:
Products - The Company recognizes revenue from the sale of products (e.g., filters and engine components) as performance obligations are satisfied. This type of revenue is primarily generated from the sale of finished product to customers. Those sales predominantly contain a single delivery element and revenue is recognized at a single point in time when ownership, risks and rewards transfer (i.e., the performance obligation has been satisfied).
Contracts – Revenues are recognized as performance obligations are satisfied over time (also known as percentage-of-completion method), measured by either achievement of milestones or the ratio of costs incurred up to a given date to estimated total costs for each contract. Contract costs include all direct material, labor, subcontract and other costs. Provisions for estimated losses on uncompleted contracts are made in the period in which such losses are determined. Changes in job performance, job conditions, estimated profitability and associated change orders and
Page 7
OMNITEK ENGINEERING CORP.
Notes to Condensed Financial Statements
June 30, 2020
(unaudited)
NOTE 2 – SIGNIFICANT ACCOUNTING POLICIES (CONTINUED)
claims, including those changes arising from contract penalty provisions and final contract settlements, may result in revisions to costs and income and are recognized in the period in which the revisions are determined.
Performance Obligations
A performance obligation is a promise in a contract to transfer a distinct good or service to a customer, and is the unit of account in the new revenue standard. The contract transaction price is allocated to each distinct performance obligation and recognized as revenue when, or as, the performance obligation is satisfied. The majority
of Omnitek’s contracts have a single performance obligation as the promise to transfer the individual goods or services is not separately identifiable from other promises in the contracts and, therefore, not distinct.
Performance Obligations Satisfied Over Time
Revenues for Omnitek’s long-term contracts that satisfy the criteria for over time recognition (formerly known as percentage-of-completion method) is recognized as the work progresses. The majority of the revenue is derived from long-term engine development agreements that typically span between 12 to 24 months. Omnitek’s long-term contracts will continue to be recognized over time because our typical contract is for a customized asset with no alternative use and generally the Company has a right to payment for work completed to date. Under the new revenue standard, the cost-to-cost measure of progress continues to best depict the transfer of control of assets to the customer, which occurs as the Company incurs costs. Contract costs include labor and material. Revenue from products and services transferred to customers over time accounted for 0% and 7% of revenue for the periods ended June 30, 2020 and 2019, respectively.
Performance Obligations Satisfied at a Point in Time
Revenue from product sales is recognized at a point in time. These sales predominantly contain a single delivery element and revenue is recognized at a single point in time when ownership, risk and rewards transfer. Upon fulfilment of the performance obligation, the customer is provided an invoice demonstrating transfer of control to the customer. Revenue from goods and services transferred to customers at a point in time accounted for 100% and 93% of revenue for the periods ended June 30, 2020 and 2019, respectively.
Assurance-type warranties are the only warranties provided by the Company and, as such, Omnitek does not recognize revenue on warranty-related work. Omnitek generally provides a one-year warranty for products that it sells. Warranty claims historically have been insignificant.
Pre-contract costs are generally not incurred by the Company
Contract Estimates
Accounting for long-term contracts involves the use of various techniques to estimate total contract revenue and costs. For long-term contracts, Omnitek estimates the profit on a contract as the difference between the total estimated revenue and expected costs to complete a contract and recognizes that profit over the life of the contract.
Variable Consideration
The transaction price for contracts may include variable consideration, which includes increases to transaction price for approved and unapproved change orders, claims and incentives, and reductions to transaction price for liquidated damages. Variable consideration historically has been insignificant.
Page 8
OMNITEK ENGINEERING CORP.
Notes to Condensed Financial Statements
June 30, 2020
(unaudited)
NOTE 2 – SIGNIFICANT ACCOUNTING POLICIES (CONTINUED)
Disaggregation of Revenue
The following table presents Omnitek’s revenues disaggregated by region and product type for the three months ended June 30, 2020 and June 30, 2019:
|
|
|
For the three months ended
June 30,
|
|
|
|
For the three months ended
June 30,
|
|
|
|
2020
|
|
|
|
2019
|
|
|
|
Consumer
|
Long-term
|
|
|
|
|
Consumer
|
Long-term
|
|
Segments
|
|
|
Products
|
Contract
|
Total
|
|
|
|
Products
|
Contract
|
Total
|
Domestic
|
|
$
|
187,810
|
-
|
187,810
|
|
|
$
|
100,568
|
-
|
100,568
|
International
|
|
|
16,157
|
-
|
16,157
|
|
|
|
145,064
|
18,764
|
163,828
|
|
|
$
|
203,967
|
-
|
203,967
|
|
|
$
|
245,632
|
18,764
|
264,396
|
|
|
|
|
|
|
|
|
|
|
|
|
Filters
|
|
$
|
52,001
|
-
|
52,001
|
|
|
$
|
175,736
|
-
|
175,736
|
Components
|
|
|
151,966
|
-
|
151,966
|
|
|
|
69,896
|
-
|
69,896
|
Engineering Services
|
|
|
-
|
-
|
-
|
|
|
|
-
|
18,764
|
18,764
|
|
|
$
|
203,967
|
-
|
203,967
|
|
|
$
|
245,632
|
18,764
|
264,396
|
The following table presents Omnitek’s revenues disaggregated by region and product type for the six months ended June 30, 2019 and June 30, 2018:
|
|
|
For the six months ended June 30,
|
|
|
|
For the six months ended June 30,
|
|
|
|
2020
|
|
|
|
2019
|
|
|
|
Consumer
|
Long-term
|
|
|
|
|
Consumer
|
Long-term
|
|
Segments
|
|
|
Products
|
Contract
|
Total
|
|
|
|
Products
|
Contract
|
Total
|
Domestic
|
|
$
|
366,037
|
-
|
366,037
|
|
|
$
|
220,926
|
-
|
220,926
|
International
|
|
|
68,867
|
-
|
68,867
|
|
|
|
350,344
|
44,474
|
394,818
|
|
|
$
|
434,904
|
-
|
434,904
|
|
|
$
|
571,270
|
44,474
|
615,744
|
|
|
|
|
|
|
|
|
|
|
|
|
Filters
|
|
$
|
163,942
|
-
|
163,942
|
|
|
$
|
415,624
|
-
|
415,624
|
Components
|
|
|
270,962
|
-
|
270,962
|
|
|
|
155,646
|
-
|
155,646
|
Engineering Services
|
|
|
-
|
-
|
-
|
|
|
|
-
|
44,474
|
44,474
|
|
|
$
|
434,904
|
-
|
434,904
|
|
|
$
|
571,270
|
44,474
|
615,744
|
Page 9
OMNITEK ENGINEERING CORP.
Notes to Condensed Financial Statements
June 30, 2020
(unaudited)
NOTE 2 – SIGNIFICANT ACCOUNTING POLICIES (CONTINUED)
Inventory
Inventory is stated at the lower of cost or market. The Company’s inventory consists of finished goods and raw material and is located in Vista, California, consisting of the following:
|
June 30,
|
|
December 31,
|
Location : Vista, CA
|
2020
|
|
2019
|
Raw materials
|
$
|
928,248
|
|
$
|
935,834
|
Finished goods
|
|
1,047,007
|
|
|
1,073,623
|
Work in progress
|
|
-
|
|
|
1,800
|
Allowance for obsolete inventory
|
|
(1,038,945)
|
|
|
(988,892)
|
Total
|
$
|
936,310
|
|
$
|
1,022,365
|
The Company has established an allowance for obsolete inventory. Expense for obsolete inventory was $50,053 and $50,000, for the periods ended June 30, 2020 and June 30, 2019, respectively.
Property and Equipment
Property and equipment at June 30, 2020 and December 31, 2019 consisted of the following:
|
June 30,
|
|
December 31,
|
|
2020
|
|
2019
|
Production equipment
|
$
|
64,673
|
|
$
|
64,673
|
Computers/Office equipment
|
|
28,540
|
|
|
28,540
|
Tooling equipment
|
|
12,380
|
|
|
12,380
|
Leasehold Improvements
|
|
42,451
|
|
|
42,451
|
Less: accumulated depreciation
|
|
(146,506)
|
|
|
(146,235)
|
Total
|
$
|
1,538
|
|
$
|
1,809
|
Depreciation expense for the periods ended June 30, 2020 and June 30, 2019 was $271 and $296, respectively.
Basic and Diluted Loss per Share
The computation of basic earnings per share of common stock is based on the weighted average number of shares outstanding during the periods presented. The computation of fully diluted earnings per share includes common stock equivalents outstanding at the balance sheet date. The Company had 2,807,223 and 2,978,890 stock options that would have been included in the fully diluted earnings per share as of June 30, 2020 and June 30, 2019, respectively. However, the common stock equivalents were not included in the computation of the loss per share computation because they are anti dilutive.
Income Taxes
The Company accounts for income taxes in accordance with Accounting Standards Codification Topic 740, Income Taxes ("Topic 740"), which requires the recognition of deferred tax liabilities and assets at currently enacted tax rates for the expected future tax consequences of events that have been included in the financial statements or tax returns. A valuation allowance is recognized to reduce the net deferred tax asset to an amount that is more likely than not to be realized.
Page 10
OMNITEK ENGINEERING CORP.
Notes to Condensed Financial Statements
June 30, 2020
(unaudited)
NOTE 2 – SIGNIFICANT ACCOUNTING POLICIES (CONTINUED)
Topic 740 provides guidance on the accounting for uncertainty in income taxes recognized in a company's financial statements. Topic 740 requires a company to determine whether it is more likely than not that a tax position will be sustained upon examination based upon the technical merits of the position. If the more likely-than-not threshold is met, a company must measure the tax position to determine the amount to recognize in the financial statements.
The Company includes interest and penalties arising from the underpayment of income taxes in the statements of operations in the provision for income taxes. As of June 30, 2020 and December 31, 2019 the Company had no accrued interest or penalties related to uncertain tax positions. The Company files an income tax return in the U.S. federal jurisdiction and the state of California. With few exceptions, the Company is no longer subject to U.S. federal, state, and local, or non-U.S. income tax examinations by tax authorities for years before 2012.
Liquidity and Going Concern
Historically, the Company has incurred net losses and negative cash flows from operations. As of June 30, 2020, the Company had an accumulated deficit of $21,235,131 and total stockholders’ deficit of $(647,001). At June 30, 2020, the Company had current assets of $1,124,427 including cash of $107,032, and current liabilities of $1,539,417, resulting in negative working capital of $(414,990). For the six months ended June 30, 2020, the Company reported a net loss of $259,202 and net cash used in operating activities of $201,204. Management believes that based on its operating plan, the projected sales for 2020, combined with funds available from its working capital will be sufficient to fund operations for the next twelve months. However, there can be no assurance that operations and operating cash flows will continue at the current levels or improve in the near future. Whether, and when, the Company can attain profitability and positive cash flows from operations is uncertain. The Company is also uncertain whether it can raise additional capital. These uncertainties cast significant doubt upon the Company’s ability to continue as a going concern. Our financial statements have been prepared on a going concern basis, which assumes the realization of assets and liquidation of liabilities in the normal course of operations. The financial statements do not include any adjustments relating to the recoverability or classification of recorded asset amounts or the amounts or classification of liabilities should we be unable to continue as a going concern.
Recent Accounting Pronouncements
The Company has evaluated recent accounting pronouncements and their adoption has not had or is not expected to have a material impact on the Company’s financial position, or statements.
NOTE 3 – CONTRACT ASSETS AND LIABILITIES
The timing of revenue recognition, billings and cash collections results in billed accounts receivable and costs and estimated earnings in excess of billings on uncompleted contracts (contract assets) on the balance sheet. For Omnitek’s long-term contracts, amounts are generally billed as work progresses in accordance with agreed-upon contractual terms, either at periodic intervals or upon achievement of contractual milestones. Generally, billing occurs subsequent to revenue recognition, resulting in contract assets. However, Omnitek sometimes receives advances or deposits from its customers, before revenue is recognized, resulting in billings in excess of costs and estimated earnings on uncompleted contracts (contract liabilities).
The table below reconciles the net excess billings to the amounts included in the balance sheets at those dates:
|
June 30,
|
|
December 31,
|
|
2020
|
|
2019
|
Contract assets
|
$
|
13,221
|
|
$
|
13,221
|
Contract liabilities
|
$
|
(75,000)
|
|
$
|
(75,000)
|
Net amount of contract liabilities in excess of contract assets
|
$
|
(61,779)
|
|
$
|
(61,779)
|
Page 11
OMNITEK ENGINEERING CORP.
Notes to Condensed Financial Statements
June 30, 2020
(unaudited)
NOTE 4 – COMMITMENTS
Effective September 1, 2019, the Company entered into the Fourth Amendment to the Lease for its facility, reducing the size of the leased space to 21,786 square feet and extending the lease term to August 31, 2020, at which time a new lease extension has to be negotiated. . The current lease payment is $14,161 per month, plus common area maintenance expenses (CAM). Under the amended lease, past due rent is payable at monthly installments of $10,000, until such time as the past due rent has been paid in full. The lease is not subject to the right-of-use asset rules under ASU 2016-2 because it qualifies for the short-term lease exception under that pronouncement.
As of June 30, 2020 the outstanding balance was $62,529.
The security deposit of $14,000 remained the same.
NOTE 5 - RELATED PARTY TRANSACTIONS
Accounts Receivable – Related Parties
The Company holds a non-controlling interest in various distributors in exchange for use of the Company’s name and logo. As of June 30, 2020, the Company owned a 15% interest in Omnitek Engineering Thailand Co. Ltd. and a 20% interest in Omnitek Peru S.A.C. As of June 30, 2020 and December 31, 2019, the Company was owed $16,882 and $16,712, respectively, by related parties for the purchase of products and services.
Accounts Payable – Related Parties
The Company regularly incurs expenses that are paid to related parties and purchases goods and services from related parties. As of June 30, 2020 and December 31, 2019, the Company owed related parties for such expenses, goods and services in the amounts of $119,983 and $134,077, respectively.
Accrued Management Compensation
For the periods ended June 30, 2020 and December 31, 2019, the Company’s president and chief financial officer were due amounts for services performed for the Company.
As of June 30, 2020 and December 31, 2019 the accrued management fees consisted of the following:
|
June 30,
|
|
December 31,
|
|
|
2020
|
|
2019
|
|
Amounts due to the president
|
|
$
|
586,312
|
|
|
$
|
541,504
|
|
Amounts due to the chief financial officer
|
|
|
-
|
|
|
|
165,326
|
|
Total
|
|
$
|
586,312
|
|
|
$
|
706,830
|
|
The chief financial officer resigned on January 7, 2020 (effective February 7, 2020). Prior amounts due to the chief financial officer were reclassified to accounts payable and accrued liabilities on the balance sheet at June 30, 2020.
Page 12
OMNITEK ENGINEERING CORP.
Notes to Condensed Financial Statements
June 30, 2020
(unaudited)
NOTE 6 – NOTES PAYABLE - RELATED PARTY TRANSACTIONS
Notes Payable – Related Party
On September 11, 2019 the Company borrowed $12,000 from a board member. The loan was evidenced by an unsecured promissory note which bears simple interest at the rate of 8% per annum. The principal amount of the note and all accrued interest was due and payable on or before December 11, 2019. Under the terms of a Promissory Note Extension, the principal amount of the note and all accrued interest is due and payable on or before the extended maturity date of June 30, 2020. On April 29, 2020 the balance of this note was paid in full.
On May 28, 2019 the Company issued a Working Capital Promissory Note to the Company’s CEO for loans made to the Company during the calendar year 2019. The note has an annual interest rate of 5%, is unsecured and had an original maturity date of December 31, 2019. During 2019 the Company’s CEO made cumulative loans to the Company of $15,000. Under the terms of a Promissory Note Extension, the principal amount of the note and all accrued interest is due and payable on or before the extended maturity date of December 31, 2020. On April 29, 2020 the balance of this note was paid in full.
On January 19, 2017 the Company issued a promissory note for $15,000 to the Company’s CEO. The note has an annual interest rate of 5% and is unsecured. The principal amount of the note and all accrued interest is due and payable on or before January 19, 2021. As of June 30, 2019 and December 31, 2018 Notes Payable – Related Party consisted of the following:
|
June 30,
|
|
December 31,
|
|
2020
|
|
2019
|
Note payable, related party, current portion
|
|
$
|
15,000
|
|
|
$
|
27,000
|
Notes payable, related party, net of current portion
|
|
|
-
|
|
|
|
15,000
|
Total
|
|
$
|
15,000
|
|
|
$
|
42,000
|
NOTE 7 – DEBT
Note Payable
On December 11, 2019, a convertible notes payable matured with an outstanding principal balance of $40,000. The Lender elected to convert $25,000 of the outstanding principal to restricted common stock. Under the terms of the Allonge to Senior Secured Convertible Promissory Note and Agreement, the remaining principal balance of $15,000 is due and payable with an extended maturity date of May 11, 2020. On April 27, 2020 the balance of this note was paid in full. As of June 30, 2020, and December 31, 2019 Note Payable consisted of the following:
|
June 30,
|
|
December 31,
|
|
2020
|
|
2019
|
Note payable
|
|
$
|
-
|
|
|
$
|
15,000
|
Total
|
|
$
|
-
|
|
|
$
|
15,000
|
Page 13
OMNITEK ENGINEERING CORP.
Notes to Condensed Financial Statements
June 30, 2020
(unaudited)
NOTE 7 – DEBT (Continued)
Loans payable – SBA
Economic Injury Disaster Loan
On April 21, 2020, the Company obtained a loan (the “SBA EIDL Loan”) under the recently enacted Coronavirus Aid, Relief, and Economic Security Act (“CARES Act”) adminitstered by the U.S. Small Business Administration. The Company received total proceeds of $199,000 from the SBA EIDL loan.
The SBA EIDL Loan is evidenced by a Loan Authorization and Agreement, a Secured Promissory Note (the “Note” and Security Agreement. Interest on the unpaid principal balance of the Note shall accrue at the rate of three and 75/100 percent (3.75%) per annum. Pursuant to the terms of the Note, commencing May 21, 2021 (i.e., twelve (12) months from the Note date), the Company shall make principal and interest payments in the amount of $970 every month, with any unpaid principal and accrued interest due and payable on April 21, 2050. The obligations under the Loan Authorization and Agreement, and the Note shall be secured pursuant to the Security Agreement and a first position lien and security interest in the Collateral (as defined in the Security Agreement). The collateral in which the security interest is granted includes all tangible and intangible personal property, including, but not limited to: (a) inventory, and (b) equipment.
Payroll Protection Program
On May 28, 2020, the Company received funds pursuant to a Paycheck Protection Program loan (the “SBA PPP Loan”) from Riverview Bank, under recently enacted CARES Act administered by U.S. Small Business Administration. The Company received total proceeds of $100,000 from the SBA PPP Loan. In accordance with the requirements of the CARES Act, the Company will use proceeds from the SBA PPP Loan primarily for payroll costs. The SBA PPP Loan is scheduled to mature on May 22, 2022 and has a 1.00% interest rate and is subject to the terms and conditions applicable to loans adminstered by the SBA under the CARES Act. If certain conditions are met, as provided for under section 1106 of the CARES Act, as amended by the PPP Flexibility Act the loan may be forgiven in its entirety.
As of June 30, 2020, and December 31, 2019 Debt consisted of the following:
|
June 30,
|
|
December 31,
|
|
|
2020
|
|
2019
|
|
Loan payable – SBA EIDL
|
|
$
|
199,000
|
|
|
$
|
-
|
|
Loan payable – SBA PPP
|
|
|
100,000
|
|
|
|
|
|
Less current portion
|
|
|
(39,564)
|
|
|
|
-
|
|
Total
|
|
$
|
259,436
|
|
|
$
|
-
|
|
Page 14
OMNITEK ENGINEERING CORP.
Notes to Condensed Financial Statements
June 30, 2020
(unaudited)
NOTE 8 - STOCK OPTIONS AND WARRANTS
During the six months ended June 30, 2020 and 2019, the Company granted 150,000 and 450,000 options for services, respectively. During the six months ended June 30, 2020 and 2019, the Company recognized expense of $12,078 and $36,822, respectively, for options and warrants that vested during the periods pursuant to ASC Topic 718. Total remaining amount of compensation expense to be recognized in future periods is $3,635.
On August 3, 2011 the Board of Directors adopted the Omnitek Engineering Corp. 2011 Long-term Incentive Plan (the “2011 Plan”), under which 1,000,000 shares of Company’s Common Stock were reserved for issuance of both Incentive Stock Options to employees only and and Non-Qualified Stock Options to employees and consultants at its discretion. As of June 30, 2020 the Company has a total of 125,000 options issued under the 2011 Plan. On September 11, 2015 the Board of Directors adopted the Omnitek Engineering Corp. 2015 Long Term Incentive Plan (the “2015 Plan”), under which 2,500,000 shares of the Company’s Common Stock were reserved for issuance of both Incentive Stock Options to employees only and Non-Qualified Stock Options to employees and consultants at its discretion. As of June 30, 2020 the Company has a total of 1,915,556 options issued under the 2015 Plan. In October 2017, the Company’s shareholders approved its 2017 Long-Term Incentive Plan (the “2017 Plan”). Under the 2017 plan, the Company may issue up to 5,000,000 shares of both Incentive Stock Options to employees only and Non-Qualified Stock Options to employees and consultants at its discretion. As of June 30, 2020, the Company has a total of 816,667 options issued under the 2017 Plan. During the six months ended June 30, 2020 and 2019 the Company issued -0- and -0- warrants, respectively.
The Company recognizes compensation expense for stock-based awards expected to vest on a straight-line basis over the requisite service period of the award based on their grant date fair value. The Company estimates the fair value of stock options using a Black-Scholes option pricing model which requires management to make estimates for certain assumptions regarding risk-free interest rate, expected life of options, expected volatility of stock and expected dividend yield of stock. When determining expected volatility, the Company considers the historical performance of the Company’s stock, as well as implied volatility. The risk-free interest rate is based on the U.S. Treasury yield curve in effect at the time of grant, based on the options’ expected term. The expected term of the options is based on the Company’s evaluation of option holders’ exercise patterns and represents the period of time that options are expected to remain unexercised. The Company uses historical data to estimate the timing and amount of forfeitures.
The following table presents the assumptions used to estimate the fair values of the stock options granted:
|
|
|
|
|
June 30, 2020
|
|
June 30, 2019
|
Expected volatility
|
159%
|
|
142%
|
Expected dividends
|
0%
|
|
0%
|
Expected term
|
7 Years
|
|
7 Years
|
Risk-free interest rate
|
0.60%
|
|
2.01%
|
Page 15
OMNITEK ENGINEERING CORP.
Notes to Condensed Financial Statements
June 30, 2020
(unaudited)
NOTE 8 - STOCK OPTIONS AND WARRANTS (CONTINUED)
A summary of the status of the options and warrants granted at June 30, 2020 and December 31, 2019 and changes during the periods then ended is presented below:
|
June 30,
|
|
December 31,
|
|
2020
|
|
2019
|
|
|
|
|
Weighted-Average
|
|
|
|
|
Weighted-Average
|
|
Shares
|
|
|
Exercise Price
|
|
Shares
|
|
|
Exercise Price
|
Outstanding at beginning of year
|
2,940,556
|
|
$
|
0.25
|
|
2,965,556
|
|
$
|
0.63
|
Granted
|
150,000
|
|
|
0.06
|
|
450,000
|
|
|
0.08
|
Exercised
|
-
|
|
|
-
|
|
-
|
|
|
-
|
Expired or cancelled
|
(50,000)
|
|
|
1.13
|
|
(475,000)
|
|
|
2.49
|
Outstanding at end of period
|
3,040,556
|
|
|
0.22
|
|
2,940,556
|
|
|
0.25
|
Exercisable
|
2,807,223
|
|
$
|
0.20
|
|
2,672,223
|
|
$
|
0.23
|
A summary of the status of the options and warrants outstanding at June 30, 2020 is presented below:
Range of Exercise Prices
|
|
Number Outstanding
|
|
Weighted-Average Remaining Contractual Life
|
|
|
Number Exercisable
|
|
Weighted-Average Exercise Price
|
|
|
|
|
|
|
|
|
|
|
$0.01-0.99
|
|
3,040,556
|
|
3.83 years
|
|
|
2,807,223
|
|
$0.20
|
|
|
|
|
|
|
|
|
|
|
NOTE 9 - SUBSEQUENT EVENTS
Effective July 14, 2020, the Company terminated the Securities Purchase Agreement between the Company and G.ON GLOBAL INVESTMENTS S.R.L. (the “Purchaser”) dated September 6, 2019, due to the Purchaser’s default. Effective upon termination, the Company issued an aggregate of 260,324 restricted shares of Common Stock to On Global Investments S.R.L., for total consideration of $51,000. 111,857 of these shares were issued at a purchase price of $0.1788 per share and 148,467 shares were issued at the default purchase price of $0.2088. No underwriters were used and no commissions were paid. The offer and sale of the shares was made by the Company in reliance upon exemptions from the registration provisions of the Securities Act of 1933, as amended, set forth in Section 4(a)(2) and Rule 506 of Regulation D, thereof, relative to the offer and sale of accredited investors, within the meaning of Rule 501 of Regulation D, of the securities of an issuer not involving any public offering.
Page 16