Rand Worldwide Inc (PK) (RWWI) Quote

http://seekingalpha.com/article/2755045-rand-worldwide-growth-by-autodesk

Amazing this thing got only four comments. Thing is dirt cheap, cash flow is huge and Mr. Kamin has a history of unlocking value for shareholders (see ROFO, CLWY, MAMS, etc.) Thing could go to $3.50 and it still wouldn't be expensive.

Long RWWI.

http://m.seekingalpha.com/article/2578035

http://otcadventures.com/?p=1469

Seems priced for flat, as OTC on defense till Jan but this also suggested 1.20 was more than fair price:
http://investorshub.advfn.com/boards/read_msg.aspx?message_id=106704189

Hey swampboots,you have gotta check this out! http://www.otcmarkets.com/stock/RWWI/news

Would love to hear your comments.

Thanks

SUBS

What is up with this Co as cyber security heating up?

Up 50% since I first posted about it, with no pump and dump. Nobody cares, go figure.

This #*(@)# company is nothing if not consistent.

Nice to see $RWWI finally get moving a little. A long time coming.

Wish I knew what was wrong with the stock of this company. Great news after great news, for all intents and purposes seemingly a real company, and yet they barely trade.

Haven't looked for quite a while and I see they're right where they always were. Too much time, sayonara!

Hey 85 and .81 in the past couple days, new highs all around, something is happening here on RWWI.

News: http://ih.advfn.com/p.php?pid=nmona&article=50238827&symbol=RWWI

More $RWWI news. This company has an absolutely ridiculous amount going for it, hundreds more times than any other stock in this price range, and is completely real.

Curriculum Development Division of Rand Worldwide® Reaches Milestone Anniversary
Date : 08/02/2011 @ 8:30AM
Source : Business Wire
Stock : Rand Worldwide (RWWI)
Quote : 0.75 -0.07 (-8.54%) @ 3:44PM

Curriculum Development Division of Rand Worldwide® Reaches Milestone Anniversary
print
Rand Worldwide, Inc. (OTCBB:RWWI)
Intraday Stock Chart

Today : Tuesday 2 August 2011
Click Here for more Rand Worldwide, Inc. Charts.

Rand Worldwide (OTCBB:RWWI), a global provider of technology solutions to organizations with engineering design and information technology requirements, announced that its courseware division, ASCENT- Center for Technical Knowledge, has celebrated its 10th anniversary.

While Rand Worldwide has been in business for over 25 years providing CAD software, training, and courseware, it was ten years ago that Rand Worldwide created a courseware division by acquiring Republic Research Training Center’s (RRTC) Autodesk courseware business and combining it with its existing Pro/ENGINEER and CATIA courseware products, creating a new division named ASCENT- Center for Technical Knowledge.

When the ASCENT division was launched in 2001, it released courseware for PTC’s Pro/ENGINEER 2000i2 and Dassault Systèmes’ CATIA V5R9. Over the years, ASCENT has published training materials for the latest versions of the software including Pro/ENGINEER Wildfire 5.0 (newly branded under the Creo umbrella), Windchill PDMLink, CATIA V5, and ENOVIA V6. As ASCENT has expanded over the years, it has grown to include a multi-disciplinary staff comprised of engineers, instructional designers, technical writers, and subject matter experts. In the last decade, ASCENT has released over 120 titles for Pro/ENGINEER courseware, and over 130 titles for CATIA V5 courseware, in addition to serving the Autodesk community with training manuals for its latest software releases.

“Rand Worldwide formed the ASCENT division 10 years ago when we recognized the need to develop a curriculum development division that focused solely on providing high-quality, unbiased training materials, and that was not distracted by selling software or services,” remarked Chris Grossman, Vice President, Engineering, Rand Worldwide. “Today, customers choose Rand Worldwide as their training provider because of the quality, up-to-date training materials that are developed by ASCENT, as well as our excellence in delivering training tailored to our customers’ needs.”

In addition to the standard curriculum, ASCENT provides customized curriculum to Rand Worldwide’s customers. One of these customers, John Deere, has chosen Rand Worldwide as a Partner-level supplier in its Achieving Excellence Program for nine consecutive years because of the outstanding training classes provided by Rand Worldwide, and the customized Pro/ENGINEER training curriculum provided by ASCENT.

About Rand Worldwide

Rand Worldwide is one of the world’s leading professional services and technology companies for the engineering community, targeting organizations in the building, infrastructure, and manufacturing industries. The company advances the way organizations design, develop, and manage building, infrastructure, and manufacturing projects. Fortune 500 and Engineering News Record's Top 100 companies work with Rand Worldwide to gain a competitive advantage through technology consulting, implementation, training, and support services. One of the world's largest integrators of Autodesk software, the company also provides data archiving based on solutions from Autonomy, facilities management software from Archibus, CAD and PLM courseware through their ASCENT division, and training and support solutions for Dassault Systèmes and PTC products. For more information, visit www.rand.com.

Rand Worldwide is a registered trademark of Rand A Technology Corporation in the US and/or other countries. All other brand names, product names, or trademarks belong to their respective holders.

$RWWI news:

IMAGINiT Technologies’ Building Information Modeling Expert Ken Yost to Speak in Singapore
Date : 07/27/2011 @ 8:30PM
Source : Business Wire
Stock : Rand Worldwide (RWWI)
Quote : 0.8 0.0 (0.00%) @ 9:30AM


IMAGINiT Technologies’ Building Information Modeling Expert Ken Yost to Speak in Singapore

Rand Worldwide, Inc. (OTCBB:RWWI)
Intraday Stock Chart
Today : Thursday 28 July 2011
Rand Worldwide (OTCBB:RWWI), a global provider of technology solutions to organizations with engineering design and information technology requirements, today announced Ken Yost, an IMAGINiT Technologies expert based in the United States, will be sharing his insights on Building Information Modeling (BIM) at several complimentary seminars this August in Singapore.

Mr. Yost is bringing his deep industry expertise earned over more than 20 years, to two distinct and free sessions in August. The first presentation ‘BIM for Structural Engineers’ will be held at the new IMAGINiT Training Centre and aims to help educate on the benefits of working with Autodesk Revit Structure. The second presentation ‘Collaborating with BIM: Concept to Reality’ will be offered at the Singapore National Library and is geared to show how Autodesk products enable BIM adoption successfully throughout the building and construction process, from concept creation to project completion. Each session will be held twice, once in the morning and once in the afternoon, to accommodate the schedules of those wishing to participate.

“IMAGINiT is excited to bring one of our top thought leaders to speak about key industry issues and strategies that will help engineering and technology organizations grow their businesses by adopting new technological processes like BIM,” says Japri Maming, Singapore and Malaysia Country Manager, IMAGINiT Technologies. “Ken Yost is a seasoned CAD veteran with more than 23 years of experience working with some of the world’s top companies and is a BIM specialist who will provide deep insight to all who attend these seminars.”

A seasoned BIM consultant, Yost will demonstrate how Autodesk products combined with a strategic implementation can enable BIM to be successfully adopted throughout an entire organization.

Event Details:

Friday, August 19, 2011

Session: BIM for Structural Engineers
IMAGINiT Training Centre
#03-01 Thye Hong Kong Centre
2 Leng Kee Rd.
10:00 am – Noon & 2 pm - 4 pm

Wednesday, August 24, 2011

Session: Collaborating with BIM: Concept to Reality
Singapore National Library
100 Victoria Street
9:30 am - 1:30 pm & 2 pm - 6 pm


Each event will include a light meal and refreshments. For further information and to register while space is available, please call IMAGINiT Technologies at +65 6226 0880 or visit http://events.rand.com.

About IMAGINiT Technologies

IMAGINiT Technologies (imaginit.com), a division of Rand Worldwide, advances the way architects and engineers design, develop, and manage projects. Customers of this leading professional services and technology company include organizations in the building, infrastructure, manufacturing and facilities management industries. Fortune 500 and Engineering News Record’s Top 100 organizations work with IMAGINiT Technologies to gain competitive advantages through expert technology consulting, implementation, training, and support services. As one of the world’s largest integrators of Autodesk 3D design and engineering software, the team leverages unrivalled industry experience to design systems that accelerate innovation while improving project quality and profitability. For more information visit imaginit.com or rand.com.

Rand Worldwide is a trademark or registered trademark of Rand IMAGINiT Technologies Inc. and/or Rand A Technology Corporation in the US and/or other countries.

Autodesk is a registered trademark of Autodesk, Inc., in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders.

$RWWI news 6/23/11

IMAGINiT Technologies Earns Autodesk Consulting Specialization Designation

Date :
06/23/2011 @ 8:30AM

Source :
Business Wire

Stock :
Rand Worldwide (RWWI)

Quote :
0.79 -0.06 (-7.06%) @ 11:09AM

IMAGINiT Technologies Earns Autodesk Consulting Specialization
Rand Worldwide, Inc. (OTCBB:RWWI)
Intraday Stock Chart

Today : Thursday 23 June 2011

Rand Worldwide (OTCBB: RWWI), a global leader in providing technology solutions to organizations with engineering design and information technology requirements, today announced that its IMAGINiT Technologies division has earned Autodesk’s new Consulting Specialization designation for value added resellers.

As a globally-renown Autodesk Consulting Specialized Partner, IMAGINiT Technologies has always invested in their people and offered unmatched knowledge and support to their customers.

“We are pleased to see that IMAGINiT Technologies is one of our first partners to earn the Consulting Specialization designation,” said Bill Griffin, vice president of Worldwide Channel Sales, Autodesk Inc. “IMAGINiT’s unwavering commitment to providing customers with creative solutions and exceptional service has made them a long-time trusted partner.”

The new Autodesk partner specialization designations enable partners to further highlight and brand their expertise in delivering services in key industry areas. By completing the required curriculum and training, as well as meeting required levels of service and standards set by Autodesk, IMAGINiT Technologies continues to demonstrate through their unrivalled customer service, support and training what it means to be a trusted adviser to Autodesk customers across North America, Australia and throughout the Asia-Pacific region.

“This new designation underscores IMAGINiT’s strategy of investing in great people, and developing industry-based methodologies focused on achieving customer business goals,” said Bill Zavadil, senior vice president, Worldwide Services at IMAGINiT Technologies. “We have the largest staff of technical experts and each of our consultants is committed to sharing their deep industry expertise to ensure our customers’ success.”

About IMAGINiT Technologies

IMAGINiT Technologies (imaginit.com), a division of Rand Worldwide, advances the way architects and engineers design, develop, and manage projects. Customers of this leading professional services and technology company include organizations in the building, infrastructure, manufacturing and facilities management industries. Fortune 500 and Engineering News Record’s Top 100 organizations work with IMAGINiT Technologies to gain competitive advantages through expert technology consulting, implementation, training, and support services. As one of the world’s largest integrators of Autodesk 3D design and engineering software, the team leverages unrivalled industry experience to design systems that accelerate innovation while improving project quality and profitability. For more information visit imaginit.com or rand.com.

Rand Worldwide is a trademark or registered trademark of Rand IMAGINiT Technologies Inc. and/or Rand A Technology Corporation in the US and/or other countries.

Autodesk is a registered trademark of Autodesk, Inc., in the USA and/or other countries.

$RWWI finally moved, he likes it, hey Mikey!

$RWWI news:

Sirius XM Radio Inc. to Use Rand Secure Archive from Rand Worldwide
Date : 06/21/2011 @ 8:30AM
Source : Business Wire
Stock : Rand Worldwide (RWWI)
Quote : 0.72 -0.03 (-4.00%) @ 5:00PM


Sirius XM Radio Inc. to Use Rand Secure Archive from Rand Worldwide

Rand Worldwide, Inc. (OTCBB:RWWI)
Intraday Stock Chart
Today : Wednesday 22 June 2011
Rand Worldwide (OTCBB:RWWI), a global provider of technology solutions to organizations with engineering design and information technology requirements, announced today that it will provide data archiving capabilities via Rand Secure Archive for 3000 users at SiriusXM, America’s satellite radio company. The agreement is to supply, install and support SiriusXM with data archiving capabilities enabling it to better understand, format and govern their electronic data.

“Rand Secure Archive is proud to be playing a key part in helping an innovative leader like SiriusXM execute on their strategy for data archiving,” stated Chris Grossman, Vice President, Enterprise Applications at Rand Worldwide. “We are pleased to provide them with a solution that is robust, reduces their data storage costs, enforces their internal governance policies and enables compliance with FRCP, SOX and other SEC regulations, while providing easy access to archived data,” continued Grossman.

“Our electronic data is of critical importance to our operations. As our organization continues to evolve, managing data is paramount,” commented William Pratt, Senior Vice President and Chief Information Officer of SiriusXM. “The Rand Secure Archive platform offered us a scalable solution that could accommodate future growth and new capabilities that we may require down the road.”

Rand Secure Archive offers data archiving and management solutions based on world-class technology. Companies can simplify the process to store, manage and search data and electronic communications enabling internal compliance with regulatory and corporate governance. Rand Secure Archive is a fully-hosted, on-demand solution that allows for rapid eDiscovery searches, governance, legal hold and data recovery. Data is hosted on secure servers with direct data access available at all times. For more information, visit: www.randsa.com.

About Rand Worldwide:

Rand Worldwide is a global provider of technology solutions to organizations with engineering design and information technology requirements. Fortune 500 and Engineering News Record's Top 100 companies work with the company to gain a competitive advantage through technology consulting, implementation, training, and support services. One of the world's largest integrators of Autodesk software, the company also provides data archiving based upon solutions from Autonomy, facilities management software from ARCHIBUS, CAD and PLM courseware through their ASCENT division and provides training and support solutions on the Dassault Systèmes and PTC products. For more information see (www.rand.com).

$RWWI news!:

IMAGINiT Technologies Hosts Inaugural BIG I.D.E.A.S. Virtual Event

Date :
06/09/2011 @ 8:00AM

Source :
Business Wire

Stock :
Rand Worldwide (RWWI)

Quote :
.69 -0.03 (-4.17%) @ 5:00PM

IMAGINiT Technologies Hosts Inaugural BIG I.D.E.A.S. Virtual Event

Rand Worldwide, Inc. (OTCBB:RWWI)
Intraday Stock Chart

Today : Thursday 9 June 2011

Rand Worldwide (OTCBB: RWWI), a global leader in providing technology solutions to organizations with engineering design and information technology requirements, announces that its IMAGINiT Technologies division will be hosting a free online event, the BIG I.D.E.A.S. (Increase your Design & Efficiency Advantage) virtual conference on June 23, 2011. The event will provide a comprehensive look at the many ways manufacturers can innovate through simulation, analysis and better design processes.

Expert Insight

The event features a variety of speakers and content applicable to manufacturing engineers, design engineers, systems engineers, R&D/product developers, executives and managers. Big I.D.E.A.S. kicks off with a keynote from sustainability and innovation authority Demetria Giannisis who will explore how data management and operations process tools can reduce costs over the life-cycle of a product. The second conference keynote, from brand and innovation specialist Paul Wylde, will examine how manufacturers can advance their competitive advantage by creatively differentiating their brand.

IMAGINiT Technologies and other experts will host a number of sessions including:
•Sustainable Design Solutions – presented by Eric Carpenter, IMAGINIT Technologies
• Managing Engineering Automation Processes – presented by Scott Hale, IMAGINIT Technologies
• Integration of Engineering and ERP Systems to Support Lead Time Reduction Concepts – presented by Sean Tolodziecki, IMAGINiT Technologies
• Growing Need and Requirements for BIM in the AEC Space – presented by Jason Bailly, HDR Architecture
•Business Opportunities Provided by BIM for Building Product Manufacturers – presented by Scott Hale, IMAGINIT Technologies
• Tools to Support Industrial Design Practices – presented by Kevin Richards, Sparko Productions

“Some of the industry’s brightest minds will share insights on how optimizing design engineering processes and methodologies can lead to bottom line growth,” said Scott Hale, Director, Consulting Services, IMAGINiT Technologies. “If your manufacturing and engineering teams are searching for innovative ways to drive profitability and growth, this virtual conference is truly a must attend event.”

The day-long event will allow attendees to network in the virtual lounge as well as ask the experts questions in the virtual exhibit hall that features conference exhibitors including: the Society of Manufacturing Engineers, 3Dconnexion and the Manufacturing Technologies Group. This event is free for everyone in North America and runs from 11 a.m. to 5 p.m. EDT on Thursday, June 23rd, 2011.

For more information and to register, visit: http://imaginitbigideas.com

About IMAGINiT Technologies

IMAGINiT Technologies (imaginit.com), a division of Rand Worldwide, advances the way architects and engineers design, develop, and manage projects. Customers of this leading professional services and technology company include organizations in the building, infrastructure, manufacturing and facilities management industries. Fortune 500 and Engineering News Record’s Top 100 organizations work with IMAGINiT Technologies to gain competitive advantages through expert technology consulting, implementation, training, and support services. As one of the world’s largest integrators of Autodesk 3D design and engineering software, the team leverages unrivalled industry experience to design systems that accelerate innovation while improving project quality and profitability. For more information visit imaginit.com or rand.com.

Rand Worldwide is a trademark or registered trademark of Rand IMAGINiT Technologies Inc. and/or Rand A Technology Corporation in the US and/or other countries.

RWWI up 30% today. Flash in the pan? This has got to gear up eventually. Unusually high volume.

IMAGINiT Technologies Expands Operations into New Australian Regions

http://ih.advfn.com/p.php?pid=nmona&article=47578965&symbol=RWWI

Rand Worldwide, Inc. (OTCBB:RWWI)
Intraday Stock Chart
Today : Monday 9 May 2011
Rand Worldwide (OTCBB:RWWI), a global provider of technology solutions to organizations with engineering design and information technology requirements, announces that its IMAGINiT Technologies division (imaginit.com), is expanding operations into additional Australian regions including Western Australia and New South Wales. These newly expanded IMAGINiT territories will focus on offering Autodesk products as well as IMAGINiT professional services in support of those products.

To support these additional territories, IMAGINIT has hired industry veteran and CAD knowledge expert, Andrew Cooper as State Manager, New South Wales. A passionate customer champion, Mr. Cooper will focus on helping Australian Autodesk users optimize their software investment.

“We are truly committed to helping customers build their business. With our growing services team of technical experts and our unique industry user events, we feel we are readily equipped to support and provide value added services to new customers as we expand into new territories,” says Michael Lachs, Australian Managing Director, IMAGINiT Technologies. “Our true customer value comes from a passionate, local team of experts that is backed by a global community of more than 100 technical and customer support specialists.”

IMAGINiT Technologies helps businesses grow by providing the expertise, training and support to help companies realize the full power of design technology, increase productivity and gain a real competitive advantage on their path to innovation. IMAGINiT is now servicing South Australia, Victoria, New South Wales and Western Australia.

For further information, please contact IMAGINiT Technologies on 1300 667 263.

About IMAGINiT Technologies

IMAGINiT Technologies (imaginit.com), a division of Rand Worldwide, advances the way architects and engineers design, develop, and manage projects. Customers of this leading professional services and technology company include organizations in the building, infrastructure, manufacturing and facilities management industries. Fortune 500 and Engineering News Record’s Top 100 organizations work with IMAGINiT Technologies to gain competitive advantages through expert technology consulting, implementation, training, and support services. As one of the world’s largest integrators of Autodesk 3D design and engineering software, the team leverages unrivalled industry experience to design systems that accelerate innovation while improving project quality and profitability. For more information visit imaginit.com or rand.com.

Rand Worldwide is a trademark or registered trademark of Rand IMAGINiT Technologies Inc. and/or Rand A Technology Corporation in the US and/or other countries.

No news this week so far. Shocking!

News: http://ih.advfn.com/p.php?pid=nmona&article=47188414&symbol=RWWI

Rand Worldwide Offers their Dassault Systèmes Customers Technical Support Services through Partnership with Razorleaf
Date : 04/06/2011 @ 8:00AM
Source : Business Wire
Stock : Rand Worldwide, Inc. (RWWI)
Quote : 0.75 0.05 (7.14%) @ 10:36AM


Rand Worldwide Offers their Dassault Systèmes Customers Technical Support Services through Partnership with Razorleaf

Rand Worldwide, Inc. (OTCBB:RWWI)
Intraday Stock Chart
Today : Wednesday 6 April 2011
Rand Worldwide, Inc. (OTCBB: RWWI), a global provider of technology solutions to organizations with engineering design and information technology requirements, announced that Razorleaf Corporation will now provide RAND Worldwide’s Dassault Systèmes customers with ongoing phone support. Rand Worldwide customers who hold phone support agreements for CATIA, SmarTeam and ENOVIA will now be serviced by the technical experts on the Razorleaf team.

“To ensure our customers continue to receive the highest levels of expertise, we offer them access to the best teams available,” says Chris Grossman, Vice President, Enterprise Applications, Rand Worldwide. “We’ve worked with Razorleaf in the past so we know they have the breadth and depth to quickly resolve any of our customers’ support related queries. We’re confident our customers will continue to enjoy the high level of phone support that only a skilled services focused organization can offer.”

Customers will notice little change with their phone support for the CATIA, SmarTeam and ENOVIA products. The phone numbers, support agreement details and high level of service will all remain the same. To further this seamless transition, even Rand Worldwide’s knowledge-based support service offerings, ProductivityNOW, ProductivityNOW Solo and ProductivityNOW Complete have been adopted by Razorleaf. The only difference that customers will notice will be that a Razorleaf expert will answer the phone to quickly resolve their query. And since Razorleaf experts rotate from field implementations to the help desk and back again, they’re able to dispense real-world advice that works the first time.

“We’re excited to offer Rand Worldwide customers access to our comprehensive support team,” says Eric Doubell, President, Razorleaf Corporation. “Since we’re focused on providing support and services, and don’t sell product, we’re able to continue to offer the unbiased advice and very high level of expertise that Rand Worldwide customers expect.”

About Rand Worldwide

Rand Worldwide (OTCBB: RWWI) is one of the world’s leading providers of professional services and technology to the engineering community. Its four divisions, IMAGINiT Technologies, ASCENT – Center for Technical Knowledge, Rand Secure Archive and Rand Worldwide Training and Support have over 50 offices in five countries. Customers are Fortune 500 and Engineering News Record’s Top 100 organizations in the building, infrastructure, manufacturing and facilities management industries. For more information visit www.rand.com.

About Razorleaf

Razorleaf is a consulting services provider that helps companies become market leaders through the measured application of technology and best practices to existing business processes. Razorleaf specializes in process analysis, implementation, training and support of enterprise technologies including Design Automation, Enterprise Portal, Product Data Management, and Product Lifecycle Management solutions. Razorleaf is privately held with headquarters in Stow, Ohio. For additional information, visit www.razorleaf.com.

Rand Worldwide is a trademark or registered trademark of Rand Worldwide or its subsidiaries. All other trademarks are owned by their respective holders.

News: http://ih.advfn.com/p.php?pid=nmona&article=47103819&symbol=RWWI

Rand Worldwide Participates in the COE 2011 Annual Conference Supporting Users of Dassault Systèmes Software Solutions
Date : 03/31/2011 @ 9:18AM
Source : Business Wire
Stock : Rand Worldwide (RWWI)
Quote : 0.7 0.0 (0.00%) @ 12:03PM


Rand Worldwide Participates in the COE 2011 Annual Conference Supporting Users of Dassault Systèmes Software Solutions

Rand Worldwide, Inc. (OTCBB:RWWI)
Intraday Stock Chart
Today : Thursday 31 March 2011
Rand Worldwide, a global leader in providing technology solutions to organizations with engineering design and information technology requirements, announced that it will be presenting and exhibiting at the COE Annual PLM Conference and TechniFair being held at the Rosen Shingle Creek in Orlando, FL, April 3-6, 2011.

Rand Worldwide will exhibit in Booth #301 and will be promoting their training programs for CATIA V5, DMU V5, and ENOVIA SmarTeam. Rand Worldwide offers a full suite of instructor-led training classes along with customized training solutions, online training classes, and self-paced learning through its online portal, ProductivityNOW. Demonstrations of ProductivityNOW are available upon request.

In addition to exhibiting its training services at COE, one of Rand Worldwide’s Technical Training Engineers, Ray Olson, will be delivering a hands-on workshop entitled: Introduction to CATIA V5 Surface Machining. This session will be taught on Wednesday, April 6th at 1:30pm.

The CATIA V5 Surface Machining session will provide a basic introduction to CATIA V5 3 axis Surface Machining capabilities. This class is ideal for anyone interested in machining three-dimensional designs with CATIA V5. All class attendees will receive a three page document detailing the step-by-step procedure on how to machine a three-dimensional part with CATIA V5 software.

“Through our innovative in-class and online training solutions, along with our years of industry experience, Rand Worldwide is able to provide unparalleled training and support to CATIA users," remarked Derryl Caillemer, Training Director, Rand Worldwide. “Our custom solutions are especially beneficial in helping our customers have the least amount of down time when mastering a new software skill.”

About Rand Worldwide

Rand Worldwide is one of the world’s leading providers of professional services and technology to the engineering community, targeting organizations in the building, infrastructure, and manufacturing industries. (www.rand.com)

Rand Worldwide is a trademark or registered trademark of Rand IMAGINiT Technologies Inc. and/or Rand A Technology Corporation in the US and/or other countries. All other brand names, product names, or trademarks belong to their respective holders.

News:

http://ih.advfn.com/p.php?pid=nmona&article=47009160&symbol=RWWI

IMAGINiT Technologies Unveils Scan to BIM™2012
Date : 03/24/2011 @ 9:41AM
Source : Business Wire
Stock : Rand Worldwide (RWWI)
Quote : 0.65 0.0 (0.00%) @ 9:56AM


IMAGINiT Technologies Unveils Scan to BIM™2012

Rand Worldwide, Inc. (OTCBB:RWWI)
Intraday Stock Chart
Today : Thursday 24 March 2011
Rand Worldwide (OTCBB: RWWI), a global leader in providing technology solutions to organizations with engineering design and information technology requirements, announced that its IMAGINiT Technologies division has today launched the new Scan to BIM™ 2012 (http://imaginit.com/scantobim) software for the Autodesk Revit 2012 platform.

This new downloadable version is re-engineered specifically to support the new point cloud engine in Autodesk Revit 2012 software. Highly sought-after features such as the ability to create Revit geometry from the point cloud and analyze any differences between the user’s model and the point cloud will continue to provide users with both productivity and quality assurances.

“We’re proud to say that by listening to customer requests and harnessing the capabilities of the new Revit 2012 platform, our development team has improved the already robust Scan to BIM software,” says Matt Mason, Director, Software Development, IMAGINiT Technologies. “We continue to work hard to implement new features which will provide additional benefits for Revit users.”

Additional tools to assist the overall Scan to BIM process include the ability to create:

3D walls from the point clouds;
Piping and ductwork (Revit MEP only);
Construction geometry;
Topology;
Embedded curtain walls;
Automatic section placement and 3D views;
Slab deformations.
Scan to BIM 2012 is designed specifically for the Autodesk Revit 2012 products (Autodesk Revit Architecture, Autodesk Revit Structure and Autodesk Revit MEP software) and includes specific features for architects engineers, contractors and survey providers.

Availability & Pricing

Scan to BIM 2012 is $2,495 (USD) per seat and will be available for download in mid-April. An optional maintenance subscription covering technical support and future upgrades costs US$495 (USD) per seat, per year. For more information contact IMAGINiT Technologies at 800-356-9050.

About IMAGINiT Technologies

IMAGINiT Technologies (imaginit.com), a division of Rand Worldwide, advances the way architects and engineers design, develop, and manage projects. Customers of this leading professional services and technology company include organizations in the building, infrastructure, manufacturing and facilities management industries. Fortune 500 and Engineering News Record’s Top 100 organizations work with IMAGINiT Technologies to gain competitive advantages through expert technology consulting, implementation, training, and support services. As one of the world’s largest integrators of Autodesk 3D design and engineering software, the team leverages unrivalled industry experience to design systems that accelerate innovation while improving project quality and profitability. For more information visit imaginit.com or rand.com.

Rand Worldwide is a trademark or registered trademark of Rand IMAGINiT Technologies Inc. and/or Rand A Technology Corporation in the US and/or other countries.

More RWWI news:

http://ih.advfn.com/p.php?pid=nmona&article=46970696&symbol=RWWI

IMAGINiT Technologies Supports Autodesk 2012 Product Launch With Technical & Training Expertise
Date : 03/22/2011 @ 8:00AM
Source : Business Wire
Stock : Rand Worldwide (RWWI)
Quote : 0.65 0.0 (0.00%) @ 4:31PM


IMAGINiT Technologies Supports Autodesk 2012 Product Launch With Technical & Training Expertise

Rand Worldwide, Inc. (OTCBB:RWWI)
Intraday Stock Chart
Today : Wednesday 23 March 2011
Rand Worldwide (OTCBB:RWWI), a global provider of technology solutions to organizations with engineering design and information technology requirements, today announces its IMAGINiT Technologies division is now offering the complete 2012 portfolio of Autodesk 3D design software products and will host a series of live events where companies can learn more about the software and what it will mean to their business. To help turn business visions into reality, as one of Autodesk’s largest partners, IMAGINiT offers access to unrivalled technical expertise, dedicated customer support teams and award-winning trainers.

“Our teams of technical experts and training instructors are ready to help businesses maximize their Autodesk 2012 software investment by ensuring customers make the right business decisions when evaluating their plans,” says Bob Heeg, Executive Vice President, IMAGINiT Worldwide Operations, IMAGINiT Technologies. “Our local experts are connected to each other around the world so every customer gains insights from global best practices as well as key learnings from other industries.”

In order to provide deeper insight into the new suite of Autodesk products, IMAGINiT experts are creating blogs, videos and presentations which explore the latest developments in the software. A video primer for the Autodesk Inventor 2012 Interface Enhancements is now online and many more videos will follow over the next couple of months. All videos will be uploaded to the IMAGINiT YouTube channel.

To further assist customers, ProductivityNOW, IMAGINiT’s online eLearning resource and service knowledgebase is being updated to offer help and learning tools for the Autodesk 2012 suite of products. Additionally, IMAGINiT’s AutoCAD 2012 Update Course has been published to ProductivityNOW for subscribing customers to work through at their own pace. The IMAGINiT training team will also be offering new training classes on the 2012 products as early as May 1, 2011.

In concert with the Autodesk 2012 launch programs, IMAGINiT Technologies is hosting a series of “Make Your Ideas a Reality” live launch events. IMAGINiT technical experts will be on hand to showcase all of the new product developments in industry specific breakout sessions. All events will be hosted in a variety of unique venues such as art museums, galleries and boutique hotels to help inspire creativity when exploring the new possibilities of the programs.

Make Your Ideas a Reality Live Event Schedule:

Boston, MA – May 17, 2011
New York, NY – May 18, 2011
Dallas, TX – May 18, 2011
Baltimore, MD – May 19, 2011
Orlando, FL – May 19, 2011
Cleveland, OH – May 24, 2011
St. Paul, MN – May 24, 2011
Detroit, MI – May 25, 2011
Denver, CO – May 25, 2011
Chicago, IL – May 26, 2011
Seattle, WA – May 26, 2011


IMAGINiT representatives are also participating in the Autodesk Canadian 2012 Launch Roadshow.

Vancouver, BC – May 3, 2011
Toronto, ON – May 12, 2011


In addition to the face-to-face events, IMAGINiT will be hosting more than 40 webcasts throughout the year which will detail “What’s New” in the 2012 products. Details on the all of the above events and the webcasts are available here.

About IMAGINiT Technologies

IMAGINiT Technologies (imaginit.com), a division of Rand Worldwide, advances the way architects and engineers design, develop, and manage projects. Customers of this leading professional services and technology company include organizations in the building, infrastructure, manufacturing and facilities management industries. Fortune 500 and Engineering News Record’s Top 100 organizations work with IMAGINiT Technologies to gain competitive advantages through expert technology consulting, implementation, training, and support services. As one of the world’s largest integrators of Autodesk 3D design and engineering software, the team leverages unrivalled industry experience to design systems that accelerate innovation while improving project quality and profitability. For more information visit imaginit.com or rand.com.

Rand Worldwide is a trademark or registered trademark of Rand IMAGINiT Technologies Inc. and/or Rand A Technology Corporation in the US and/or other countries.

Autodesk, AutoCAD, Autodesk Inventor and Inventor are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders

RWWI news:

http://ih.advfn.com/p.php?pid=nmona&article=46955261&symbol=RWWI

IMAGINiT Technologies Wins Multiple Autodesk Awards
Date : 03/21/2011 @ 10:10AM
Source : Business Wire
Stock : Rand Worldwide (RWWI)
Quote : 0.65 0.0 (0.00%) @ 4:31PM


IMAGINiT Technologies Wins Multiple Autodesk Awards

Rand Worldwide, Inc. (OTCBB:RWWI)
Intraday Stock Chart
Today : Monday 21 March 2011
Rand Worldwide (OTCBB:RWWI), a global provider of technology solutions to organizations with engineering design and information technology requirements, announced today that its IMAGINiT Technologies division (imaginit.com) recently received several awards from Autodesk, Inc., a world leader in 3D design software. IMAGINiT, and recently merged entity Avatech, took home the Q4 Reseller of the Quarter Award for Autodesk’s fiscal year 2011, two Platinum Club awards, and was also honored with the Ninety-Ninety Award for Excellence.

“Our technical, sales and customer support staff are proud to have won a string of the most coveted Autodesk awards over the past few weeks,” says Marc Dulude, Chief Executive Officer, Rand Worldwide. “It feels great to be recognized for our exceptional technical expertise, customer service and sales, and we recognize that none of this would be possible without the support of our customers and especially our long-term customers that have been with us year after year.”

The four prestigious Autodesk awards recognize the leadership that IMAGINiT Technologies demonstrates in technical expertise, customer service and sales growth.

Top North American Reseller in Education Overall Sales Growth Platinum Award – This Platinum Award was presented to acknowledge the continued growth and strength in the various educational fields during the Autodesk 2011 fiscal year.
Top North American Reseller in Overall Product Sales Growth Platinum Award– This Platinum Award was presented to acknowledge that the company demonstrated strong Autodesk sales performance and commitment to customer service during the Autodesk 2011 fiscal year.
Ninety-Ninety Award for Excellence - Autodesk also presented IMAGINiT with the Ninety-Ninety Award for Excellence for having a 90% renewal rate and a 90% attach rate on Subscription contracts for the previous fiscal year. Recipients of this award also had to demonstrate the value of Subscription through their marketing channels, and had to demonstrate sales of at least 500 new Subscription contracts.
North American Reseller of the Quarter - Autodesk named IMAGINiT the North American Reseller of the Quarter for the fourth quarter of Autodesk’s 2011 fiscal year. IMAGINiT was selected for its significant growth and exceeding targets across industry-specific markets that include architecture, engineering, construction, manufacturing and design visualization. Overall, this award is based on quality of customer service, support and professional education, overall growth and vertical sales.
IMAGINiT Technologies is one of the world’s largest providers of enterprise solutions to the engineering community, as well as being one of the largest North American Autodesk Authorized Training Center (ATC) sites. With over 20 years of experience, and more than 45 offices throughout North America and Asia Pacific, the company provides expertise, training and support needed to help companies increase productivity, maximize their investment in design engineering software tools and gain competitive advantage in the marketplace.

About IMAGINiT Technologies

IMAGINiT Technologies (imaginit.com), a division of Rand Worldwide, advances the way architects and engineers design, develop, and manage projects. Customers of this leading professional services and technology company include organizations in the building, infrastructure, manufacturing and facilities management industries. Fortune 500 and Engineering News Record’s Top 100 organizations work with IMAGINiT Technologies to gain competitive advantages through expert technology consulting, implementation, training, and support services. As one of the world’s largest integrators of Autodesk 3D design and engineering software, the team leverages unrivalled industry experience to design systems that accelerate innovation while improving project quality and profitability. For more information visit imaginit.com or rand.com.

Rand Worldwide is a trademark or registered trademark of Rand IMAGINiT Technologies Inc. and/or Rand A Technology Corporation in the US and/or other countries.

Autodesk and ATC are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders.

Nice! Good article.

For your reading pleasure: 8/10 CEO Interview - George Davis

He talks about increasing liquidity and gives some good info. I know it was 8/10 but at least only 6-months ago.

http://gfxspeak.com/2010/08/19/2009-avatechs-george-davis-we-can-weather-the-storm/

Enjoy.

Did you get my email Sir?

Dude, we need to spread the word about this sleeping giant!

Now that's what we like to see! lol and everybody watching money losing pinkies with promoters.

10-K out! 1.2 Million net profit!

http://www.otcmarkets.com/stock/RWWI/financials

Compared to a loss of 2.7 million same time last year!

IMAGINiT Technologies Hosts BIM 360 Virtual Conference
Date : 02/08/2011 @ 9:24AM
Source : Business Wire
Stock : Rand Worldwide (RWWI)
Quote : 0.7 -0.05 (-6.67%) @ 3:26PM


IMAGINiT Technologies Hosts BIM 360 Virtual Conference

Rand Worldwide, Inc. (OTCBB:RWWI)
Intraday Stock Chart
Today : Tuesday 8 February 2011
Rand Worldwide (OTCBB:RWWI), a global provider of technology solutions to organizations with engineering design and information technology requirements, announces that its IMAGINiT Technologies division (imaginit.com), is launching BIM 360, a virtual conference (imaginit.com/BIM360). Attendees will learn about implementing BIM best practices, be shown the latest tools and software such as Scan to BIM, and they will also be able to network with peers and ask questions in the exhibit hall and lounge area. This online event runs from 9am to 5pm ET on Thursday, February 17, 2011 and is available for free to anyone in North America.

Designed for architectural, engineering and facility management professionals, this full-day virtual conference explores every aspect of Building Information Modeling (BIM) – from design through maintenance. Running simultaneously, two session tracks will dissect BIM topics from the perspective of both software users and managers.

“Adopting BIM drastically changes the way architectural firms and general contractors work with both their partners and customers, so understanding the best practices and executing efficiently saves time, resources and frustration,” says Bill Zavadil, Senior Vice President, IMAGINiT Worldwide Services. “At our BIM 360 virtual conference, we’re bringing together the brightest minds in the business to offer software users and managers an immersive learning experience and a place where the industry can ask questions, exchange ideas and learn about the newest technologies.”

This premier virtual event for all BIM and building related professionals is an exclusive chance to hear dynamic and renowned BIM experts speak about BIM related technologies of today and tomorrow. Listen for a few hours or the entire day and interact online with your peers in the BIM 360 virtual lounge. Attendees can also interact with conference exhibitors which include: ARCHIBUS, Offit Kurman, Rand Worldwide, SmartBIM, and Trelligence.

Sessions

Expert-led sessions cover BIM from every angle. Detailed descriptions can be found at imaginit.com/BIM360. Each topic is divided into two tracks. One specifically designed for software users and the other focused for managers. This ensures every attendee receives relevant insight that they can apply directly to their organizations. A bonus session, Model Sharing, is intended for managers and will run at the end of the day.

Sessions for Software Users

All software user focused sessions are 60 minutes and include demonstrations of various software platforms. View a two minute YouTube video describing the top five reasons software users should register for BIM 360 at youtube.com/imaginittech.

Design Models
Analysis Models
Documentation Models
Virtual Construction Models
Facilities Models
Sessions for Managers

All manager focused sessions are 30 minutes and focus on the related business issues for each area. View a two minute YouTube video describing the top five reasons management should register for BIM 360 at youtube.com/imaginittech.

Design Models
Analysis Models
Documentation Models
Virtual Construction Models
Facilities Models
Model Sharing (bonus track for managers)
Registration

Registration is free, but advanced registration is required. Register now by visiting imaginit.com/BIM360Register.

About IMAGINiT Technologies

IMAGINiT Technologies (imaginit.com), a division of Rand Worldwide, advances the way architects and engineers design, develop, and manage projects. Customers of this leading professional services and technology company include organizations in the building, infrastructure, manufacturing and facilities management industries. Fortune 500 and Engineering News Record’s Top 100 organizations work with IMAGINiT Technologies to gain competitive advantages through expert technology consulting, implementation, training, and support services. As one of the world’s largest integrators of Autodesk 3D design and engineering software, the team leverages unrivalled industry experience to design systems that accelerate innovation while improving project quality and profitability. For more information visit imaginit.com or rand.com.

Rand Worldwide is a trademark or registered trademark of Rand IMAGINiT Technologies Inc. and/or Rand A Technology Corporation in the US and/or other countries.

$RWWI looks ready now.

IMAGINiT Technologies Secures $5.6 Million Contract
Date : 01/04/2011 @ 1:25PM
Source : Business Wire
Stock : Rand Worldwide (RWWI)
Quote : 0.75 0.1 (15.38%) @ 4:31PM

IMAGINiT Technologies Secures $5.6 Million Contract

Rand Worldwide, Inc. (OTCBB:RWWI)
Today : Tuesday 4 January 2011

Rand Worldwide (OTCBB:RWWI), a global provider of technology solutions to organizations with engineering design and information technology requirements, announced today that its IMAGINiT Technologies division (imaginit.rand.com) has won a $5.6 million contract with a national education provider. The agreement is to supply, install and support Autodesk Education Master Suite 2010 and Autodesk Education Entertainment Creation Suite 2010 to more than 100 locations across the country for a technology-focused program education provider.

“Our IMAGINiT Technologies division is proud to be playing a key part in helping engineering students across the United States achieve their career goals,” says Marc Dulude, CEO, Rand Worldwide. “Our commitment to the education space has been clear for many years and that consistently high level of engagement and support to our customers has led once again to a strong vote of confidence from a major educational group.”

Educational leaders choose IMAGINiT Technologies for their insight into this vertical and their unrivalled technical expertise. Customers include private and public institutions and state universities such as Ohio, Illinois, Iowa, South Dakota and Nebraska.

About IMAGINiT Technologies

IMAGINiT Technologies (imaginit.rand.com), a division of Rand Worldwide, advances the way architects and engineers design, develop, and manage projects. Customers of this leading professional services and technology company include organizations in the building, infrastructure, manufacturing and facilities management industries. Fortune 500 and Engineering News Record’s Top 100 organizations work with IMAGINiT Technologies to gain competitive advantages through expert technology consulting, implementation, training, and support services. As one of the world’s largest integrators of Autodesk software, the team leverages unrivalled industry experience to design systems that accelerate innovation while improving project quality and profitability. For more information visit imaginit.rand.com or www.rand.com.

Rand Worldwide is a trademark or registered trademark of Rand IMAGINiT Technologies Inc. and/or Rand A Technology Corporation in the US and/or other countries. Autodesk is a registered trademark of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries.

RWWI multimillion dollar deal news today, let's see where this goes.